Download Free Water Supply Systems Book in PDF and EPUB Free Download. You can read online Water Supply Systems and write the review.

Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.
This authoritative resource consolidates comprehensive information on the analysis and design of water supply systems into one practical, hands-on reference. After an introduction and explanation of the basic principles of pipe flows, it covers topics ranging from cost considerations to optimal water distribution design to various types of systems to writing water distribution programs. With numerous examples and closed-form design equations, this is the definitive reference for civil and environmental engineers, water supply managers and planners, and postgraduate students.
The reality of the post-September 11 situation forces the operators of water supply systems through the world to examine the security and safety of their systems, its vulnerability to intentional interference and sabotage with respect to quantity and quality of potable water. In assessing system vulnerability, there is an urgent need to develop emergency response plans providing ways and means for alternative water supply at the moment of system operation disruption, and system remediation and recovery after the attack. Security of Water Supply Systems: from Source to Tap presents the state-of-the art with a view to the future, conclusions from past experiences are highlighted and future developments are suggested in the field of drinking water safety.
Knowing how to manage the losses from water supply networks and how to get to the next level in bettering your system is a major problem and one that is most common in the majority of water companies worldwide. Sometimes water companies set their sights too high and cannot deliver due to non-realistic targets setting. Of course this is considered or seen as a failure within the company or country when it is really just exceeding expectations of what can be delivered. The aim of System Losses from Water Supply Networks is to assist water companies to identify where they are on the ‘water loss ladder’ and what is required to move to the next level. The book will provide an understanding of what the water companies need to achieve and where they should be aiming for in their efforts to reduce water losses. The book provides useful and practical information on non-revenue water (NRW) issues and solutions enriched with relevant case studies.
Owing to climate change related uncertainties and anticipated population growth, different parts of the developing and the developed world (particularly urban areas) are experiencing water shortages or flooding and security of fit-for-purpose supplies is becoming a major issue. The emphasis on decentralized alternative water supply systems has increased considerably. Most of the information on such systems is either scattered or focuses on large scale reuse with little consideration given to decentralized small to medium scale systems. Alternative Water Supply Systems brings together recent research into the available and innovative options and additionally shares experiences from a wide range of contexts from both developed and developing countries. Alternative Water Supply Systems covers technical, social, financial and institutional aspects associated with decentralized alternative water supply systems. These include systems for greywater recycling, rainwater harvesting, recovery of water through condensation and sewer mining. A number of case studies from the UK, the USA, Australia and the developing world are presented to discuss associated environmental and health implications. The book provides insights into a range of aspects associated with alternative water supply systems and an evidence base (through case studies) on potential water savings and trade-offs. The information organized in the book is aimed at facilitating wider uptake of context specific alternatives at a decentralized scale mainly in urban areas. This book is a key reference for postgraduate level students and researchers interested in environmental engineering, water resources management, urban planning and resource efficiency, water demand management, building service engineering and sustainable architecture. It provides practical insights for water professionals such as systems designers, operators, and decision makers responsible for planning and delivering sustainable water management in urban areas through the implementation of decentralized water recycling. Authors: Fayyaz Ali Memon, Centre for Water Systems, University of Exeter, UK and Sarah Ward, Centre for Water Systems, University of Exeter, UK
Rainwater tank systems have been widely adopted across the world to provide a safe local source of water in underdeveloped rural areas, a substitution for mains water for non potable end uses in water stressed urban areas, as well as providing flooding control in monsoonal climates such as Korea, or combined sewer systems such as Germany. The importance of these systems in cities has grown, as water managers seek to provide a range of decentralised solutions to supply constraints of current water supply systems, whilst reducing the impact of urban development on the natural environment, and increasing resilience to the impacts of climate change. Rainwater tank systems are now often implemented under integrated urban water management (IUWM) and water sensitive urban design (WSUD) philosophies, which take a holistic view of the urban water cycle. Rainwater Tank Systems for Urban Water Supply is based on a comprehensive, multi-million dollar research program that was undertaken in South East Queensland (SEQ) Australia in response to the Millennium drought when the water supply level in the regions drinking water dams dropped to 17% in July 2007 and the area came close to running out of water. In particular, the book provides insights and detailed analysis of design, modelling, implementation, operation, energy usage, economics, management, health risk, social perceptions and implications for water quality/quantity of roof water runoff. The approaches and methodologies included in Rainwater Tank Systems for Urban Water Supply inform and validate research programs, and provide insights on the expected performance and potential pitfalls of the adoption of rainwater tanks systems including: actual harvested yield and resulting mains water savings, optimal sizing for rainwater storages and roof collection systems, expected water quality and implications for managing public health risks, modelling tools available for decision support, operation and management approaches of a decentralised asset at the household scale and community acceptance. The book is suitable for use at undergraduate and post graduate levels and is of particular interest to water professionals across the globe, who are involved in the strategic water planning for a town, city or a region. It is a valuable resource for developers, civil designers, water planners, architects and plumbers seeking to implement sustainable water servicing approaches for residential, industrial and commercial developments.
Small communities violate federal requirements for safe drinking water as much as three times more often than cities. Yet these communities often cannot afford to improve their water service. Safe Water From Every Tap reviews the risks of violating drinking water standards and discusses options for improving water service in small communities. Included are detailed reviews of a wide range of technologies appropriate for treating drinking water in small communities. The book also presents a variety of institutional options for improving the management efficiency and financial stability of water systems.
Presenting detailed coverage of the major infrastructure issues in water system security; this book provides professional guidance on designing; operating; maintaining; and rehabilitating water systems to ensure state-of-the-art security. --
Focusing primarily on understanding the steady-state hydraulics that form the basis of hydraulic design and computer modelling applied in water distribution, Introduction to Urban Water Distribution elaborates the general principles and practices of water distribution in a straightforward way. The workshop problems and design exercise develop a temporal and spatial perception of the main hydraulic parameters in the system for given layout and demand scenarios. Furthermore, the book contains a detailed discussion of water demand, which is a fundamental element of any network analysis, and principles of network construction, operation, and maintenance. The attached CD contains all spreadsheet applications mentioned in the text, and the network model used in the design exercise. Written in a manner that is easily understood by those who know little about the subject, this introductory text will also benefit experts dealing with advanced problems who wish to refresh their knowledge.
Technology now affects almost every aspect of Water Supply Management, Operation, Planning and Design; the speed of development means that assessing what is "new" is sometimes difficult. Old ideas can now be applied because of new technology; technology is now revealing problems that were unnoticed 10 years ago. Some emerging technologies promise much but are still underdeveloped for use in real world conditions, while we should always remember that "new" technology depends upon the state of development in respective countries, a point which is particularly relevant to the NATO Advanced Study Institute, for which this book has been produced. Thus our objective in producing the book has been to highlight, in a wide range of technical areas, where and how technology is being applied, what is "new" and what the limitations of these technologies are in the real world. We have also tried to provide an European and American perspective where possible to illustrate how problems are tackled in different cultural environments. It is probably true that "technology" is also somewhat dependent upon the political, economic and organisational climate in different countries and we have included a chapter covering these aspects.