Download Free Water Purification Using Heat Pumps Book in PDF and EPUB Free Download. You can read online Water Purification Using Heat Pumps and write the review.

This book is the result of a long-term co-operative research and professional development programme between the Instituto de Investigaciones Electricas (IIE), Mexico, and the University of Salford, UK. It provides the design basis for the fabrication of small and large scale commercial absorption heat pump systems, and includes a comprehensive treatment of the economics of heat pump systems. It charts the development of heat pump technology from theoretical principles to the operation of practical systems for the purification of water, both for human consumption and a wide variety of industrial purposes. In addition to the increasing demand for potable water there is a rapidly increasing demand for clean water in industries ranging from foodstuffs and pharmaceuticals to electronics. This book will be essential reading for industrial engineers and others concerned with the cost-effective, environmentally friendly production of clean water.
This volume introduces the fundamentals of adsorption heat pumps, beginning with the simplest cycle and building to the most complex. Selection of adsorbents and refrigerants, design of adsorption beds and auxiliary heat exchangers, and applications for different designs are all discussed. The book educates engineering students, engineers, and researchers about an environmentally friendly alternative to vapor compression refrigeration systems promising for many applications. The authors cover thermodynamic cycles, working materials for the cycles, and aspects of designing and modeling adsorption heat pumps. Elucidates the various applications of adsorption heat pumps; Illustrates modeling techniques for quickly screening new working materials early in their development; Provides comprehensive review of cycle types, with discussion of the applications for which they are best suited; Appropriate for graduate courses on advanced thermodynamics, design of thermal systems, sustainable energy technology, refrigeration technologies, and thermal control of electronics.
The need for fresh water is increasing with the rapid growth of the world's population. In countries and regions with available water resources, it is necessary to ensure the health and safety of the water supply. However, in countries and regions with limited freshwater resources, priority is given to water supply plans and projects, among which the desalination strategy stands out. In the desalination process, membrane and thermal processes are used to obtain fresh water from salty water that is in abundant amounts in the sea. This book will outline valuable scientific contributions to the new desalination and water treatment technologies to obtain high quality water with low negative environmental impacts and cost. The editors would like to record their sincere thanks to the authors for their contributions.
Heating and Cooling with Ground-Source Heat Pumps in Cold and Moderate Climates: Design Principles, Potential Applications and Case Studies focuses on applications and cases studies of ground-source heat pumps in moderate and cold climates. It details technical aspects (such as materials, thermal fluid carriers and pumping, and drilling/trenching technologies), as well as the most common and uncommon application fields for basic system configurations. The principles of system integrations and applications in moderate and cold climates (such as hybrid, solar-assisted, thermo-syphon, foundation, mines, snow melting, district heating and cooling ground-source heat pump systems, etc.) are also presented, each followed by case studies. Based on the author's more than 30 years of technical experience Discusses ground-source heat pump technologies that can be successfully applied in moderate and cold climates Presents several case studies, including successful energy results, as well as the main lessons learned This work is aimed at designers of HVAC systems, as well as geological, mechanical, and chemical engineers implementing environmentally-friendly heating and cooling technologies for buildings.
Heating and Cooling with Ground-Source Heat Pumps in Moderate and Cold Climates, Two-Volume Set focuses on the use of very low-temperature geothermal energy for heating and cooling residential, institutional, and industrial buildings, and aims to increase the design community’s awareness and knowledge of the benefits, design, and installation requirements of commercial/institutional building ground-source heat pumps (GSHP). This set helps readers assess applicability, select a GSHP system type, and estimate building thermal load to ensure proper size for ground-source subsystems, appropriate brine and groundwater flow rates, and apt design of building closed-loops with distributed or central geothermal heat pumps. The first volume addresses fundamentals and design principles of vertical and horizontal indirect and direct expansion closed-loop, as well as ground- and surface-water ground-source heat pump systems. It explains the thermodynamic aspects of mechanical and thermochemical compression cycles of geothermal heat pumps, as well as the energetic, economic, and environmental aspects associated with the use of ground-source heat pump systems for heating and cooling residential and commercial/institutional buildings in moderate and cold climates. The second volume focuses on applications and cases studies of ground-source heat pumps in moderate and cold climates. It details technical aspects, as well as the most common and uncommon application fields of basic system configurations. The principles of system integrations and applications in moderate and cold climates are also presented, each followed by case studies. This comprehensive work is aimed at designers of HVAC systems, as well as geological, mechanical, and chemical engineers implementing environmentally-friendly heating and cooling technologies for buildings.
It has long been recognized that realizing the potential for energy conservation and diversification by using heat pumps offers considerable benefits to the environment. Important work on more efficient and ozone-friendly working fluids will further enhance the case for greater support of heat pump research. This book contains the Proceedings of the Third International Energy Agency Conference held in Tokyo in March 1990. The main theme of the Conference, 'Heat Pumps - Solving Energy and Environmental Challenges', is explained in great depth, covering not only technical characteristics but economic factors and the role of government and other bodies in promoting research, and the uses of all types of heat pumps are also fully considered. As well as publishing the papers presented at the meeting, the book also contains the extensive complementary poster sessions from the Conference.
This handbook provides a comprehensive summary on the energy systems used in green buildings, with a particular focus on solar energy - the most common renewable energy source applied in this field. With the growing concern about environmental protections, the concepts of green building have been widely promoted and implemented in nowadays building designs and constructions. Among all, sustainable energy systems, including energy harvesting, conversion, and storage, is one of most important design factors in green buildings. Unlike traditional energy systems which highly rely on fossil fuel, green buildings utilize renewable energy source or high efficient energy systems, or both, to provide environmental friendly, low carbon waste energy. The most updated concepts, designs, technologies developed and implemented in heat pumps, cooling systems, power systems, and energy storage will be discussed here in details. This handbook is subdivided into 7-9 main sections to provide an in-depth discussion from foundational principles to practical techniques. In addition, different cases about green energy systems implemented in global will be discussed. The book will be structured easy-to-read, to make it more accessible to graduate students and professionals in diverse scientific and engineering communities, including applied physics, civil engineering, electrical engineering, mechanical engineering, material engineering, and chemical engineering.