Download Free Unstable Alpine Permafrost Book in PDF and EPUB Free Download. You can read online Unstable Alpine Permafrost and write the review.

Snow and Ice-Related Hazards, Risks, and Disasters provides you with the latest scientific developments in glacier surges and melting, ice shelf collapses, paleo-climate reconstruction, sea level rise, climate change implications, causality, impacts, preparedness, and mitigation. It takes a geo-scientific approach to the topic while also covering current thinking about directly related social scientific issues that can adversely affect ecosystems and global economies. Puts the contributions from expert oceanographers, geologists, geophysicists, environmental scientists, and climatologists selected by a world-renowned editorial board in your hands Presents the latest research on causality, glacial surges, ice-shelf collapses, sea level rise, climate change implications, and more Numerous tables, maps, diagrams, illustrations and photographs of hazardous processes will be included Features new insights into the implications of climate change on increased melting, collapsing, flooding, methane emissions, and sea level rise
Alpine permafrost exists at high altitude at lower latitudes, such as in the Swiss Alps. Accelerating climate change, including rising mean annual air temperature and extreme rainfall conditions in alpine regions induces permafrost degradation. The warming of permafrost causes accelerated creep of rock glaciers, due to increased unfrozen water content and higher deformability of the ice phase. Recently, the development of deepening depressions has been observed in several rock glaciers in Switzerland, and the changes in land surface characteristics and drainage systems may initiate slope instabilities in rock glaciers. The main aim of this thesis is to characterise the strength and stiffness of alpine frozen soil in rock glaciers. To this end, the geotechnical response, such as creep and failure of frozen soil was investigated through a triaxial stress path testing programme with novel measurement systems for detecting acoustic emissions and measuring volumetric change. In addition, the resistance to crack initiation and propagation was investigated through a beam bending test programme on rectangular artificially frozen soil specimens, using the acoustic emission measurement system. The evaluation of laboratory tests on artificially frozen soil specimens implied that the development of deep depressions in rock glaciers occurs through differential creep and thermal degradation, and that the rate of deformation has the potential to lead to instabilities in rock glaciers. A comparison of the simulation results with the experimental data demonstrated that the semi-coupled model was successful in simulating the most important aspects of the temperature-dependent stress-strain relationship for the frozen soil behaviour that was measured at the element scale. This thesis contributes to an understanding of the variations in geotechnical response of alpine permafrost, by investigating the behaviour of artificially frozen soil specimens experimentally and numerically with time and temperature under specific stress paths. However, further investigations are necessary to assess the long-term stability of rock glaciers affected by climate change.
Double porosity soil is characterised by a soil continuum containing two distinct porosities. Typically, this consists of macro-grains (lumps) of soil that have an internal porosity defined as the intragranular porosity. The spaces between lumps are identified as intergranular voids that give rise to the intergranular porosity. Human activities such as land reclamation or mining can give rise to large areas of land with subsoil that exhibits double porosity. The need to build in, or on, these areas is increasing, due to demand for land for industrial usage, infrastructure, and residence. However, the engineering properties of such soils are challenging, and often difficult to predict due to their inhomogeneity and a lack of information about the initial or current parameters. Double porosity mining waste landfills in Northern Bohemia in the Czech Republic were studied in this project. There, decades of open-cast mining of brown coal have left vast areas of land affected by the waste overburden that has been removed and dumped in old mining pits. Redevelopment of areas affected by mining sometimes requires construction on old overburden waste spoil heaps, which consist primarily of lumps of overconsolidated clay and are therefore characterised by a double porosity soil structure. The loading response on these clayfills entails large absolute and relative deformations, which means that ground improvement is normally needed before construction begins, to ensure that both stability and service limit state requirements are met. The primary aim of this research was a comparison, through physical modelling, of ground improvement techniques on double porosity clay landfills. A secondary objective was to contribute to the understanding of the material behaviour governing response to loading and other processes on double porosity soil.
Knowledge of the performance of river dykes during flooding is necessary when designing governmental assistance plans aimed to reduce both casualties and material damage. This is especially relevant when floods have increased in their frequency during the last decades, together with the resulting material damage and life costs. Most of previous attempts for analyzing dyke breaching during flooding have neglected to consider the soil mechanics component and the influence of infiltration and saturation changes on the failure mechanisms developed in the river dyke. This research project aimed to fill that gap in knowledge by analyzing, in a comprehensive manner, the effect of transient water conditions, represented by successive flood cycles, on the seepage conditions and subsequent breaching of dykes. Therefore, three key sub-projects were carried out: • the analysis of the results from an overflow field test, • the physical modeling of small-scaled models under an enhanced gravity field, • the numerical modeling of the flow response and the resulting stability of both the air- and water-side slopes. The results from the numerical simulations matched accurately with the results obtained with the centrifuge modeling, including the prediction of local instabilities during the flood cycles for those dykes that did not include a toe filter.
This PhD thesis investigates the effectiveness of drainage measures with respect to two particularly important problems associated with tunnelling through water-bearing, weak ground: the stability of the tunnel face and the stability and deformation of grouting bodies. Water is an adverse factor with respect to the stability and deformation of underground structures due to the pore water pressure and the seepage forces associated with seepage flow towards the tunnel. Drainage boreholes reduce the pore water pressure and the seepage forces in the vicinity of the cavity. Furthermore, loss of pore water pressure increases the effective stresses and thus the shearing resistance of the ground („consolidation“), which is favourable in terms the deformation occurring during and after tunnelling. The goal of the PhD thesis is to elaborate a more detailed understanding of the interrelationships between drainage measures and the stability of the tunnel face and grouting bodies. The main objectives of the investigations relating to the tunnel face are: 1. analysis of face stability through limit equilibrium computations taking account of the numerically determined seepage flow conditions prevailing in the ground after the implementation of drainage measures; 2. systematic investigation of tunnel face stability considering several different drainage layouts and working out designnomograms; 3. consideration of a series of aspects limiting pore pressure relief and thus the effectiveness of drainage measures and their impact on face stability. The main objectives of the investigations with regard to grouting bodies are: 1. a study of the stabilizing effect of the virtual case of ideal drainage on tunnel support and plastification in grouted fault zones in plane strain conditions; 2. a comparison with the stabilizing effect of real drainage layouts, i.e. when considering pore pressure relief due to specific drainage borehole arrangements; 3. application of the drainage measure both before and after the injection works. In summary, the contribution of this PhD thesis is the detailed investigation of the static effects of drainage measures during tunnelling in water-bearing ground with respect to the stability of the tunnel face and the grouting body as well as the supply of design aids capable of providing a quick assessment of face stability when considering a number of advance drainage schemes.
This volume gathers the latest advances, innovations, and applications in the field of geotechnical engineering, as presented by leading researchers and engineers at the 7th Italian National Congress of Geotechnical Researchers (CNRIG 2019), entitled “Geotechnical Research for the Protection and Development of the Territory” (Lecco, Italy, July 3-5, 2019). The congress is intended to promote exchanges on the role of geotechnical research and its findings regarding the protection against natural hazards, design criteria for structures and infrastructures, and the definition of sustainable development strategies. The contributions cover a diverse range of topics, including infrastructural challenges, underground space utilization, and sustainable construction in problematic soils and situations, as well as geo-environmental aspects such as landfills, environmental and energy geotechnics, geotechnical monitoring, and risk assessment and mitigation. Selected by means of a rigorous peer-review process, they will spur novel research directions and foster future multidisciplinary collaborations.
This research work had the aim of developing a procedure for back-calculating accurate and precise parameter values, describing the mechanical behaviour of the materials built in an existing road structure. After reviewing the existing testing techniques, a new device was designed and assembled at the IGT, Institute for Geotechnical Engineering (ETH Zürich) for measuring the three dimensional deflection bowl under a standard axle load (SAL). Particular attention was paid for obtaining precise and accurate significant measurements for inverse analysis. Three field tests on different locations and road structures were carried out: a flexible pavement type built in a concrete pit (indoor facility) at the EPFL (Ecole Polytechnique Federale de Lausanne), a semirigid type in Hinwil (Switzerland) and a flexible type in Bellinzona (Hinwil). The tests results show that the measured road displacements under a SAL, for relatively low temperatures, are generally reversible and time independent. Laboratory tests (uniaxial compression) were carried out on cores obtained from field samples.The strain measurements of the loaded samples were carried out with strain gages, and validated against devices with different technology (LVDT). The analysis of the test results showed that the materials have different bulk and deviatoric stress-strain behaviour. A new thermodynamical framework for non linear viscoelasticity (hyperviscoelasticity) was developed. Experimentally validated hyperviscoelastic and hyperelastic constitutive laws were adopted respectively for describing the mechanical behaviour of asphalt and cement stabilized mixtures. The inverse analysis of the field tests results was carried out with two different optimization algorithms (Levenberg Marquardt and Mesh Adaptative Direct Search), the FE program ABAQUS, and the developed user defined models. The results demonstrate the accuracy and precision of the parameter values obtained with the proposed inverse analysis procedure, demonstrating a potential for application of the developed technique for non destructing testing of real road structures.
These proceedings contain two hundred and eighteen papers representing the work of authors from countries across the world. They cover a wide range of research and applications in safety and reliability issues that concern all types of systems, processes and structures.