Download Free Underground Production Methods In Mining Engineering Book in PDF and EPUB Free Download. You can read online Underground Production Methods In Mining Engineering and write the review.

Underground Mining Methods presents the latest principles and techniques in use today. Reflecting the international and diverse nature of the industry, a series of mining case studies is presented covering the commodity range from iron ore to diamonds extracted by operations located in all corners of the world. Industry experts have contributed 77 chapters. This book is certain to become a standard for every practicing mining engineer and student alike. Sections include: General Mine Design Considerations, Room-and-Pillar Mining of Hard Rock/Soft Rock, Longwall Mining of Hard Rock, Shrinkage Stoping, Sublevel Stoping, Cut-and-Fill Mining, Sublevel Caving, Panel Caving, Foundations for Design, and Underground Mining Looks to the Future.
Underground Production Methods in Mining Engineering Introduction to Underground Mining Advantages of Underground Mining Challenges of Underground Mining Shaft Mining Drift Mining Slope Mining Room-and-Pillar Mining Longwall Mining Safety Considerations in Underground Mining Ventilation Systems in Underground Mines Ground Support Techniques Drilling and Blasting Techniques Transportation Systems in Underground Mines Automation and Robotics in Underground Mining
Coal will continue to provide a major portion of energy requirements in the United States for at least the next several decades. It is imperative that accurate information describing the amount, location, and quality of the coal resources and reserves be available to fulfill energy needs. It is also important that the United States extract its coal resources efficiently, safely, and in an environmentally responsible manner. A renewed focus on federal support for coal-related research, coordinated across agencies and with the active participation of the states and industrial sector, is a critical element for each of these requirements. Coal focuses on the research and development needs and priorities in the areas of coal resource and reserve assessments, coal mining and processing, transportation of coal and coal products, and coal utilization.
The Office of Industrial Technologies (OIT) of the U. S. Department of Energy commissioned the National Research Council (NRC) to undertake a study on required technologies for the Mining Industries of the Future Program to complement information provided to the program by the National Mining Association. Subsequently, the National Institute for Occupational Safety and Health also became a sponsor of this study, and the Statement of Task was expanded to include health and safety. The overall objectives of this study are: (a) to review available information on the U.S. mining industry; (b) to identify critical research and development needs related to the exploration, mining, and processing of coal, minerals, and metals; and (c) to examine the federal contribution to research and development in mining processes.
Here is the first systematic handbook treatment of quantitative modeling natural resource problems, their allocated efficient use, and societal and economic impact. Andrés Weintraub is the very top person in Natural Resource research. He has selected co-editors who are at the top of the sub-fields in natural resources: agriculture, fisheries, forestry, and mining. The book covers these areas with contributions from researchers on, among others, modeling natural research problems, quantifying data, and developing algorithms.
This third edition of the SME Mining Engineering Handbook reaffirms its international reputation as "the handbook of choice" for today's practicing mining engineer. It distills the body of knowledge that characterizes mining engineering as a disciplinary field and has subsequently helped to inspire and inform generations of mining professionals.Virtually all of the information is original content, representing the latest information from more than 250 internationally recognized mining industry experts. Within the handbook's 115 thought-provoking chapters are current topics relevant to today's mining professional: Analyzing how the mining and minerals industry will develop over the medium and long term--why such changes are inevitable, what this will mean in terms of challenges, and how they could be managed Explaining the mechanics associated with the multifaceted world of mine and mineral economics, from the decisions associated with how best to finance a single piece of high-value equipment to the long-term cash-flow issues associated with mine planning at a mature operation Describing the recent and ongoing technical initiatives and engineering developments in relation to robotics, automation, acid rock drainage, block caving optimization, or process dewatering methods Examining in detail the methods and equipment available to achieve efficient, predictable, and safe rock breaking, whether employing a tunnel boring machine for development work, mineral extraction using a mobile miner, or cast blasting at a surface coal operation Identifying the salient points that dictate which is the safest, most efficient, and most versatile extraction method to employ, as well as describing in detail how each alternative is engineered Discussing the impacts that social and environmental issues have on mining from the pre-exploration phase to end-of-mine issues and beyond, and how to manage these two increasingly important factors to the benefit of both the mining companies and other stakeholders
An introductory text and reference on mining engineering highlighting the latest in mining technology Introductory Mining Engineering outlines the role of the mining engineer throughout the life of a mine, including prospecting for the deposit, determining the site's value, developing the mine, extracting the mineral values, and reclaiming the land afterward. This Second Edition is written with a focus on sustainability-managing land to meet the economic and environmental needs of the present while enhancing its ability to also meet the needs of future generations. Coverage includes aboveground and underground methods of mining for a wide range of substances, including metals, nonmetals, and fuels. Completely up to date, this book presents the latest information on such technologies as remote sensing, GPS, geophysical surveying, and mineral deposit evaluation, as well as continuous integrated mining operations and autonomous trucks. Also included is new information on landscape restoration, regional planning, wetlands protection, subsidence mitigation, and much more. New chapters include coverage of: * Environmental responsibilities * Regulations * Health and safety issues Generously supplemented with more than 200 photographs, drawings, and tables, Introductory Mining Engineering, Second Edition is an indispensable book for mining engineering students and a comprehensive reference for professionals.
Rock mechanics is a field of applied science which has become recognised as a coherent engineering discipline within the last two decades. It consists of a body of knowledge of the mechanical properties of rock, various techniques for the analysis of rock stress under some imposed perturbation, a set of established principles expressing rock mass response to load, and a logical methodology for applying these notions and techniques to real physical prob lems. Some of the areas where application of rock mechanics concepts have been demonstrated to be of industrial value include surface and subsurface construction, mining and other methods of mineral recovery, geothermal energy recovery and subsurface hazardous waste isolation. In many cases, the pressures of industrial demand for rigour and precision in project or process design have led to rapid evolution of the engineering discipline, and general improvement in its basis in both the geosciences and engineering mechanics. An intellectual commitment in some outstanding research centres to the proper development of rock mechanics has now resulted in a capacity for engineering design in rock not conceivable two decades ago. Mining engineering is an obvious candidate for application of rock mechanics principles in the design of excavations generated by mineral extrac tion. A primary concern in mining operations, either on surface or underground, is loosely termed 'ground control', i. e.
This book teaches readers ground engineering principles and related mining and risk management practices associated with underground coal mining. It establishes the basic elements of risk management and the fundamental principles of ground behaviour and then applies these to the essential building blocks of any underground coal mining system, comprising excavations, pillars, and interactions between workings. Readers will also learn about types of ground support and reinforcement systems and their operating mechanisms. These elements provide the platform whereby the principles can be applied to mining practice and risk management, directed primarily to bord and pillar mining, pillar extraction, longwall mining, sub-surface and surface subsidence, and operational hazards. The text concludes by presenting the framework of risk-based ground control management systems for achieving safe workplaces and efficient mining operations. In addition, a comprehensive reference list provides additional sources of information on the subject. Throughout, a large variety of examples show good and bad mining situations in order to demonstrate the application, or absence, of the established principles in practice. Written by an expert in underground coal mining and risk management, this book will help students and practitioners gain a deep understanding of the basic principles behind designing and conducting mining operations that are safe, efficient, and economically viable. Provides a comprehensive coverage of ground engineering principles within a risk management framework Features a large variety of examples that show good and poor mining situations in order to demonstrate the application of the established principles in practice Ideal for students and practitioners About the author Emeritus Professor Jim Galvin has a relatively unique combination of industrial, research and academic experience in the mining industry that spans specialist research and applied knowledge in ground engineering, mine management and risk management. His career encompasses directing ground engineering research groups in South Africa and Australia; practical mining experience, including active participation in the mines rescue service and responsibility for the design, operation, and management of large underground coal mines and for the consequences of loss of ground control as a mine manager; appointments as Professor and Head of the School of Mining Engineering at the University of New South Wales; and safety advisor to a number of Boards of Directors of organisations associated with mining. Awards Winner of the ACARP Excellence Research Award 2016. The Australian Coal Industry's Research Program selects recipients to receive ACARP Research and Industry Excellence Awards every two years. The recipients are selected on the recommendation of technical committees. They are honored for achievement of a considerable advance in an area of importance to the Australian coal mining industry. An important criterion is the likelihood of the results from the project being applied in mines. Winner of the Merv Harris Award from the Mine Managers Association of Australia. The Merv Harris Award is named for Merv Harris who donated money to be invested for a continuing award in 1988. With the award, the Mine Managers Association of Australia honors members of the Association who demonstrate technical achievement in the Australian Coal Mining Industry. The first award was granted in 1990, since then, only two people have received this honor. The book has received the following awards.... AGS (Australian Geomechanics Society) congratulates Dr Galvin for these awards
Guidelines for Open Pit Slope Design is a comprehensive account of the open pit slope design process. Created as an outcome of the Large Open Pit (LOP) project, an international research and technology transfer project on rock slope stability in open pit mines, this book provides an up-to-date compendium of knowledge of the slope design processes that should be followed and the tools that are available to aid slope design practitioners. This book links innovative mining geomechanics research into the strength of closely jointed rock masses with the most recent advances in numerical modelling, creating more effective ways for predicting rock slope stability and reliability in open pit mines. It sets out the key elements of slope design, the required levels of effort and the acceptance criteria that are needed to satisfy best practice with respect to pit slope investigation, design, implementation and performance monitoring. Guidelines for Open Pit Slope Design comprises 14 chapters that directly follow the life of mine sequence from project commencement through to closure. It includes: information on gathering all of the field data that is required to create a 3D model of the geotechnical conditions at a mine site; how data is collated and used to design the walls of the open pit; how the design is implemented; up-to-date procedures for wall control and performance assessment, including limits blasting, scaling, slope support and slope monitoring; and how formal risk management procedures can be applied to each stage of the process. This book will assist in meeting stakeholder requirements for pit slopes that are stable, in regards to safety, ore recovery and financial return, for the required life of the mine.