Download Free Theory And Application Of Hydraulic Modeling Book in PDF and EPUB Free Download. You can read online Theory And Application Of Hydraulic Modeling and write the review.

This edited volume from Japan’s Research Subcommittee on Methodology for Dealing with Geomaterials in Hydraulic Model Experiments presents readers with a state-of-the-art overview of experimental and computational methods used to address similarity scaling incompatibilities present in fluid–sediment flows. Readers will gain an understanding of complex phenomena in the boundary fields of hydraulics and geotechnical engineering. Chapter contributors focus on the phenomena that are affected by the interactions between fluid wave and ground in a complex field, which for many years have been challenging to process and model. In addition to describing the implementation of model tests and the concept of the law of similarity, this book contrasts these phenomena with the laws of similarity, describes models and numeral analysis methods, and explains important considerations using experimental case studies. Each chapter is written by leading researchers in Japan who are members of the Research Subcommittee on Methodology for Dealing with Geomaterials in Hydraulic Model Experiments. The chapters are closely linked but are written so that each can be read individually. Readers will be able to apply this knowledge to their work and to create models that more accurately simulate the interactions between wave and ground, allowing them to better understand these phenomena and devise more appropriate strategies for defense and so on when necessary. This collection provides information that can be used by young researchers and post-graduate students in the boundary fields of hydraulics and geotechnical engineering who aim at becoming civil engineers, and it will be of particular value to practicing engineers of all experience levels who must regularly analyze complex interactions between fluids and ground.
For graduate students, research workers and practising engineers in the design of hydraulic structures and designing water works.
Digital elevation model issues in water resources modeling - Preparation of DEMs for use in environmental modeling analysis - Source water protection project : a comparison of watershed delineation methods in ARC/INFO and arcView GIS - DEM preprocessing for efficient watershed delineation - Gis tools for HMS modeling support - Hydrologic model of the buffalo bayou using GIS - Development of digital terrain representation for use in river modeling - HEC-GeoRAS : linking GIS to hydraulic analysis using ARC/INFO and HEC-RAS - Floodplain determination using arcView GIS and HEC-RAS - The accuracy and efficiency of GIS-Based floodplain determinations.
Computational Hydraulics introduces the concept of modeling and the contribution of numerical methods and numerical analysis to modeling. It provides a concise and comprehensive description of the basic hydraulic principles, and the problems addressed by these principles in the aquatic environment. Flow equations, numerical and analytical solutions are included. The necessary steps for building and applying numerical methods in hydraulics comprise the core of the book and this is followed by a report of different example applications of computational hydraulics: river training effects on flood propagation, water quality modelling of lakes and coastal applications. The theory and exercises included in the book promote learning of concepts within academic environments. Sample codes are made available online for purchasers of the book. Computational Hydraulics is intended for under-graduate and graduate students, researchers, members of governmental and non-governmental agencies and professionals involved in management of the water related problems. Author: Ioana Popescu, Hydroinformatics group, UNESCO-IHE Institute for Water Education, Delft , The Netherlands.
The expansion of unconventional petroleum resources in the recent decade and the rapid development of computational technology have provided the opportunity to develop and apply 3D numerical modeling technology to simulate the hydraulic fracturing of shale and tight sand formations. This book presents 3D numerical modeling technologies for hydraulic fracturing developed in recent years, and introduces solutions to various 3D geomechanical problems related to hydraulic fracturing. In the solution processes of the case studies included in the book, fully coupled multi-physics modeling has been adopted, along with innovative computational techniques, such as submodeling. In practice, hydraulic fracturing is an essential project component in shale gas/oil development and tight sand oil, and provides an essential measure in the process of drilling cuttings reinjection (CRI). It is also an essential measure for widened mud weight window (MWW) when drilling through naturally fractured formations; the process of hydraulic plugging is a typical application of hydraulic fracturing. 3D modeling and numerical analysis of hydraulic fracturing is essential for the successful development of tight oil/gas formations: it provides accurate solutions for optimized stage intervals in a multistage fracking job. It also provides optimized well-spacing for the design of zipper-frac wells. Numerical estimation of casing integrity under stimulation injection in the hydraulic fracturing process is one of major concerns in the successful development of unconventional resources. This topic is also investigated numerically in this book. Numerical solutions to several other typical geomechanics problems related to hydraulic fracturing, such as fluid migration caused by fault reactivation and seismic activities, are also presented. This book can be used as a reference textbook to petroleum, geotechnical and geothermal engineers, to senior undergraduate, graduate and postgraduate students, and to geologists, hydrogeologists, geophysicists and applied mathematicians working in this field. This book is also a synthetic compendium of both the fundamentals and some of the most advanced aspects of hydraulic fracturing technology.
Electro hydraulic Control Theory and Its Applications under Extreme Environment not only presents an overview on the topic, but also delves into the fundamental mathematic models of electro hydraulic control and the application of key hydraulic components under extreme environments. The book contains chapters on hydraulic system design, including thermal analysis on hydraulic power systems in aircraft, power matching designs of hydraulic rudder, and flow matching control of asymmetric valves and cylinders. With additional coverage on new devices, experiments and application technologies, this book is an ideal reference on the research and development of significant equipment. - Addresses valves' application in aircrafts, including servo valves, relief valves and pressure reducing valves - Presents a qualitative and quantitative forecast of future electro-hydraulic servo systems, service performance, and mechanization in harsh environments - Provides analysis methods, mathematical models and optimization design methods of electro-hydraulic servo valves under extreme environments
MOP 97 presents the ideas behind model design and use for a broad spectrum of hydraulic modeling methods.
Vijay Singh explains the basic concepts of entropy theory from a hydraulic perspective and demonstrates the theory's application in solving practical engineering problems.
This book covers theoretical aspects of the physical processes, derivation of the governing equations and their solutions. It focusses on hydraulics, hydrology, and contaminant transport, including implementation of computer codes with practical examples. Python-based computer codes for all the solution approaches are provided for better understanding and easy implementation. The mathematical models are demonstrated through applications and the results are analyzed through data tables, plots, and comparison with analytical and experimental data. The concepts are used to solve practical applications like surface and ground water flow, flood routing, crop water requirement and irrigation scheduling. Combines the area of computational hydraulics, hydrology, and water resources engineering with Python Gives deep description of the basic equations and the numerical solutions of both 1D and 2D problems including the numerical codes Includes step-by-step translation of numerical algorithms in computer codes with focus on learners and practitioners Demonstration of theory, mathematical models through practical applications Analysis of each example through data tables, plots, and correlation with reality This book is aimed at senior undergraduates and graduate students in Civil Engineering, Coastal Engineering, Hydrology, and Water Resources Engineering.
Accompanying CD-ROM includes: a 25-pipe academic version of WaterCAD with stand-alone interface; the WaterCAD files for individual problems; the WaterCAD user manual and an examination booklet for continuing education credits; Adobe Acrobat Reader software for viewing the manual and booklet.