Download Free The Sodium Graphite Reactor Power Plant For Cppd Book in PDF and EPUB Free Download. You can read online The Sodium Graphite Reactor Power Plant For Cppd and write the review.

The plant arrangement, component design, and the functions of various systems are described and illustrated. Relative estimated costs of the systems and major components are indicated. The reactor core is designed around requiremouts for 254 thermal megawatts, 950 deg F maximum sodium temperature, stainless steel clad graphite moderator blocks, and low enrichment (0.015 to 0.04 U235) uranium fuel elements. The fuel cycle is described for the possible fuel elements. The fuel cost factors are discussed. Burn-up limitations encountered for metallic fuel in the SGR temperature range indicate UO2 the more desirable choice. The estimated cost of electrical energy associated with the UO2 fuel is given. (auth).
A description is given of the Advanced Sodium Graphite Reactor Power Plant, including the reactor, heat transfer systems, generatirg plant, control systems, and the economics of producing 256 Mw(e). The safety of this design is due to its unusually low operating pressure, absence of chemically incompatible materials in the core, and excellent stability under atatic and dynamic conditions. The reactor is being constructed at Hallam, Nebraska, at a probable cost of 0 to 0/kw, exclusive of the first core costs. The 151 fuel elements of uranium carbide are enriched to 2.75 at.% U235 and clad in stainless steel. The average thermal neutron flux in the fuel is 8 x 1013 n/cm2sec. (B.O.G.).
An advanced sodium-cooled, graphite-moderated nuclear power plant is described which utilizes high-pressure, high-temperature steam to generate electricity at a high thermal efficiency. Steam is generated at 2400 psig, superheated to 1050 deg F and, after partial expansion in the turbine, reheated to 1000 deg F. Net thermal efficiency of the plant is 42.3%. In a plant sized to produce a net electrical output of 256 Mw, the estimated cost is 8232/kw. Estimated cost of power generation is 6.7 mills/kwh. In a similar plant with a net electrical output of 530 Mw, the estimated power generating cost is 5.4 mills/ kwh. Most of the components of the plant are within the capability of current technology. The major exception is the fuel material, uranium carbide. Preliminary results of the development work now in progress indicate that uranium carbide would be an excellent fuel for high-temperature reactors, but temperature and burnup limitation have yet to be firmly established. Additional development work is also required on the steam generators. These are the single-barrier type similar to those which will be used in the Enrico Fernri Fast Breeder Reactor plant but produce steam at higher pressure and temperature. Questions also remain regarding the use of nitrogen as a cover gas over sodium at 1200 deg F and compatibility of the materials used in the primary neutron shield. All of these questions are currently under investigation. (auth).