Download Free The Industrial Base For Carbon Dioxide Storage Book in PDF and EPUB Free Download. You can read online The Industrial Base For Carbon Dioxide Storage and write the review.

Carbon capture and storage (CCS) is the process of capturing carbon dioxide (CO2) prior to its being emitted into the atmosphere, then either using it in a commercial application or storing it in geological formations for hundreds to thousands of years. If policies aimed at large reductions of CO2 emissions from industrial sources and power plants are enacted, more CCS will be needed. RAND researchers explored the ability of the industrial base supporting the transportation and storage of CO2 to expand, assessing the industrial base for transportation and injection for CO2 for both geologic storage and enhanced oil recovery. They also identified and quantified the activities, equipment, and labor required for transporting CO2 to an injection site, using it in oil recovery, and storing it in a geologic formation. RAND developed four scenarios for future CCS development and determined that under most of them, significant expansion of geologic storage capacity is required after 2025, and that based on current activities, it appears that the industrial base supporting the development of geologic storage has the ability to meet increased needs for CO2 storage.
Carbon dioxide (CO2) capture and storage (CCS) is the one advanced technology that conventional power generation cannot do without. CCS technology reduces the carbon footprint of power plants by capturing, and storing the CO2 emissions from burning fossil-fuels and biomass. This volume provides a comprehensive reference on the state of the art research, development and demonstration of carbon storage and utilisation, covering all the storage options and their environmental impacts. It critically reviews geological, terrestrial and ocean sequestration, including enhanced oil and gas recovery, as well as other advanced concepts such as industrial utilisation, mineral carbonation, biofixation and photocatalytic reduction. - Foreword written by Lord Oxburgh, Climate Science Peer - Comprehensively examines the different methods of storage of carbon dioxide (CO2) and the various concepts for utilisation - Reviews geological sequestration of CO2, including coverage of reservoir sealing and monitoring and modelling techniques used to verify geological sequestration of CO2
Carbon Capture and Storage, Second Edition, provides a thorough, non-specialist introduction to technologies aimed at reducing greenhouse gas emissions from burning fossil fuels during power generation and other energy-intensive industrial processes, such as steelmaking. Extensively revised and updated, this second edition provides detailed coverage of key carbon dioxide capture methods along with an examination of the most promising techniques for carbon storage. The book opens with an introductory section that provides background regarding the need to reduce greenhouse gas emissions, an overview of carbon capture and storage (CCS) technologies, and a primer in the fundamentals of power generation. The next chapters focus on key carbon capture technologies, including absorption, adsorption, and membrane-based systems, addressing their applications in both the power and non-power sectors. New for the second edition, a dedicated section on geological storage of carbon dioxide follows, with chapters addressing the relevant features, events, and processes (FEP) associated with this scenario. Non-geological storage methods such as ocean storage and storage in terrestrial ecosystems are the subject of the final group of chapters. A chapter on carbon dioxide transportation is also included. This extensively revised and expanded second edition will be a valuable resource for power plant engineers, chemical engineers, geological engineers, environmental engineers, and industrial engineers seeking a concise, yet authoritative one-volume overview of this field. Researchers, consultants, and policy makers entering this discipline also will benefit from this reference. - Provides all-inclusive and authoritative coverage of the major technologies under consideration for carbon capture and storage - Presents information in an approachable format, for those with a scientific or engineering background, as well as non-specialists - Includes a new Part III dedicated to geological storage of carbon dioxide, covering this topic in much more depth (9 chapters compared to 1 in the first edition) - Features revisions and updates to all chapters - Includes new sections or expanded content on: chemical looping/calcium looping; life-cycle GHG assessment of CCS technologies; non-power industries (e.g. including pulp/paper alongside ones already covered); carbon negative technologies (e.g. BECCS); gas-fired power plants; biomass and waste co-firing; and hydrate-based capture
Absorption-Based Post-Combustion Capture of Carbon Dioxide provides a comprehensive and authoritative review of the use of absorbents for post-combustion capture of carbon dioxide. As fossil fuel-based power generation technologies are likely to remain key in the future, at least in the short- and medium-term, carbon capture and storage will be a critical greenhouse gas reduction technique. Post-combustion capture involves the removal of carbon dioxide from flue gases after fuel combustion, meaning that carbon dioxide can then be compressed and cooled to form a safely transportable liquid that can be stored underground. - Provides researchers in academia and industry with an authoritative overview of the amine-based methods for carbon dioxide capture from flue gases and related processes - Editors and contributors are well known experts in the field - Presents the first book on this specific topic
Carbon Dioxide Sequestration in Cementitious Construction Materials – Second Edition follows on the success of the previous edition and provides an up-to-date review on recent research developments on cementitious construction materials based on carbon dioxide storage. Along with the addition of an entire new section on bio- sequestration. Brand new chapters are included on carbonation methods such as carbon sequestration of cement pastes during pressurized CO2 curing; carbon dioxide sequestration of low-calcium fly ash via direct aqueous carbonation; increasing the efficiency of carbon dioxide sequestration through high temperature carbonation; and carbon sequestration in engineered cementitious composites. There are also several new case studies on sequestration of industrial wastes, which include carbon dioxide sequestration by direct mineralization of fly ash; the effect of direct carbonation routes of basic oxygen furnace slag on strength and hydration of blended cement paste; carbon sequestration of mine waste and utilization as a supplementary cementitious material and carbon dioxide sequestration on masonry blocks based on industrial wastes. This updated edition will be a valuable reference resource for academic researchers, materials scientists and civil engineers, and other construction professionals looking for viable routes for carbon sequestration in building materials. - Promotes the importance of CO2 storage in carbonation of construction materials, especially reincorporation of CO2 during fabrication - Discusses a wide range of cementitious materials with CO2 storage capabilities - Features redesign of cementation mechanisms to utilize CO2 during fabrication - Includes a new section on bio-sequestration
Over the past decade, the prospect of climate change resulting from anthropogenic CO2 has become a matter of growing public concern. Not only is the reduction of CO2 emissions extremely important, but keeping the cost at a manageable level is a prime priority for companies and the public, alike.The CO2 capture project (CCP) came together with a common goal in mind: find a technological process to capture CO2 emissions that is relatively low-cost and able be to be expanded to industrial applications. The Carbon Dioxide Capture and Storage Project outlines the research and findings of all the participating companies and associations involved in the CCP. The final results of thousands of hours of research are outlined in the book, showing a successful achievement of the CCP's goals for lower cost CO2 capture technology and furthering the safe, reliable option of geological storage. The Carbon Dioxide Capture and Storage Project is a valuable reference for any scientists, industrialists, government agencies, and companies interested in a safer, more cost-efficient response to the CO2 crisis.*Succeeds in tackling the most important issues at the heart of the CO2 crisis: lower-cost and safer solutions, and making the technology available at an industrial level.*Contains technical papers and findings of all researchers involved in the CO2 capture and storage project (CCP)*Consolidates thousands of hours of research into a concise and valuable reference work, providing up-to-the minute information on CO2 capture and underground storage alternatives.
The signals are everywhere that our planet is experiencing significant climate change. It is clear that we need to reduce the emissions of carbon dioxide and other greenhouse gases from our atmosphere if we want to avoid greatly increased risk of damage from climate change. Aggressively pursuing a program of emissions abatement or mitigation will show results over a timescale of many decades. How do we actively remove carbon dioxide from the atmosphere to make a bigger difference more quickly? As one of a two-book report, this volume of Climate Intervention discusses CDR, the carbon dioxide removal of greenhouse gas emissions from the atmosphere and sequestration of it in perpetuity. Climate Intervention: Carbon Dioxide Removal and Reliable Sequestration introduces possible CDR approaches and then discusses them in depth. Land management practices, such as low-till agriculture, reforestation and afforestation, ocean iron fertilization, and land-and-ocean-based accelerated weathering, could amplify the rates of processes that are already occurring as part of the natural carbon cycle. Other CDR approaches, such as bioenergy with carbon capture and sequestration, direct air capture and sequestration, and traditional carbon capture and sequestration, seek to capture CO2 from the atmosphere and dispose of it by pumping it underground at high pressure. This book looks at the pros and cons of these options and estimates possible rates of removal and total amounts that might be removed via these methods. With whatever portfolio of technologies the transition is achieved, eliminating the carbon dioxide emissions from the global energy and transportation systems will pose an enormous technical, economic, and social challenge that will likely take decades of concerted effort to achieve. Climate Intervention: Carbon Dioxide Removal and Reliable Sequestration will help to better understand the potential cost and performance of CDR strategies to inform debate and decision making as we work to stabilize and reduce atmospheric concentrations of carbon dioxide.
The announcement of a hydrogen fuel initiative in the President's 2003 State of the Union speech substantially increased interest in the potential for hydrogen to play a major role in the nation's long-term energy future. Prior to that event, DOE asked the National Research Council to examine key technical issues about the hydrogen economy to assist in the development of its hydrogen R&D program. Included in the assessment were the current state of technology; future cost estimates; CO2 emissions; distribution, storage, and end use considerations; and the DOE RD&D program. The report provides an assessment of hydrogen as a fuel in the nation's future energy economy and describes a number of important challenges that must be overcome if it is to make a major energy contribution. Topics covered include the hydrogen end-use technologies, transportation, hydrogen production technologies, and transition issues for hydrogen in vehicles.