Download Free The Decommissioning Handbook Book in PDF and EPUB Free Download. You can read online The Decommissioning Handbook and write the review.

Experienced Guidance on the Technical Issues of Decommissioning Projects Written by one of the original MARSSIM authors, Decommissioning Health Physics: A Handbook for MARSSIM Users, Second Edition is the only book to incorporate all of the requisite technical aspects of planning and executing radiological surveys in support of decommissioning. Extensively revised and updated, it covers survey instrumentation, detection sensitivity, statistics, dose modeling, survey procedures, and release criteria. New to the Second Edition Chapter on hot spot assessment that recognizes appropriate dosimetric significance of hot spots when designing surveys and includes a new approach for establishing hot spot limits Chapter on the clearance or release of materials, highlighting aspects of the MARSAME manual Revised chapter on characterization survey design to reflect guidance in ANSI N13.59 on the value of data quality objectives (DQOs) Updated regulations and guidance documents throughout Updated survey instrumentation used to support decontamination and decommissioning (D&D) surveys, including expanded coverage of in situ gamma spectrometers Revised statistics chapter that includes an introduction to Bayesian statistics and additional double sampling and ranked set sampling statistical approaches More case studies and examples throughout Implement the Surveys Effectively and Avoid Common Pitfalls With more than 20 years of experience as a practitioner in the decommissioning survey field, author Eric W. Abelquist prepares you for the technical challenges associated with planning and executing MARSSIM surveys. He discusses the application of statistics for survey design and data reduction and addresses the selection of survey instrumentation and detection sensitivity. He presents final status survey
Dam decommissioning or dam removal has been increasingly common since the past decade. The reason for considering dam removal may have to do with the safety of dams, high repair costs, high operating and maintenance costs, or effects on fish passage and water quality. However, the decision to remove a dam must be based on careful evaluation of the alternatives to address the specific problem at each dam. The ICOLD Committee for decommissioning dams was established in 2005 to develop information that can be used by ICOLD members to respond to questions about the dismantling of dams and to provide a forum for the exchange of information . This ICOLD Bulletin is not intended as a design guide, but as a guide to the decision making process, consultation and regulatory approvals, design and construction issues, sediment management and performance monitoring. The primary aim of these Dam decommissioning guidelines is to provide dam owners, dam engineers and other professionals with the information needed to guide decision making when considering dam dismantling as a project alternative. They are not meant to be used as a design guide, but as a guide to highlighting the points of interest. The guidelines in this ICOLD Bulletin apply only to flood defense structures and not to fall dams.
This is an authoritative compilation of information regarding methods and data used in all phases of nuclear engineering. Addressing nuclear engineers and scientists at all levels, this book provides a condensed reference on nuclear engineering since 1958.
Building upon the success of the first edition, the Nuclear Engineering Handbook, Second Edition, provides a comprehensive, up-to-date overview of nuclear power engineering. Consisting of chapters written by leading experts, this volume spans a wide range of topics in the areas of nuclear power reactor design and operation, nuclear fuel cycles, and radiation detection. Plant safety issues are addressed, and the economics of nuclear power generation in the 21st century are presented. The Second Edition also includes full coverage of Generation IV reactor designs, and new information on MRS technologies, small modular reactors, and fast reactors.
Handbook of Energy Efficiency in Buildings: A Life Cycle Approach offers a comprehensive and in-depth coverage of the subject with a further focus on the Life Cycle. The editors, renowned academics, invited a diverse group of researchers to develop original chapters for the book and managed to well integrate all contributions in a consistent volume. Sections cover the role of the building sector on energy consumption and greenhouse gas emissions, international technical standards, laws and regulations, building energy efficiency and zero energy consumption buildings, the life cycle assessment of buildings, from construction to decommissioning, and other timely topics. The multidisciplinary approach to the subject makes it valuable for researchers and industry based Civil, Construction, and Architectural Engineers. Researchers in related fields as built environment, energy and sustainability at an urban scale will also benefit from the books integrated perspective. - Presents a complete and thorough coverage of energy efficiency in buildings - Provides an integrated approach to all the different elements that impact energy efficiency - Contains coverage of worldwide regulation
Cost estimation for the decommissioning of nuclear facilities can vary considerably in format, content and practice both within and across countries. These differences may have legitimate reasons but make the process of reviewing estimates complicated and the estimates themselves difficult to defend. Hence, the joint initiative of the OECD Nuclear Energy Agency (NEA), the International Atomic Energy Agency (IAEA) and the European Commission (EC) was undertaken to propose a standard itemisation of decommissioning costs either directly for the production of cost estimates or for mapping estimates onto a standard, common structure for purposes of comparison. This report updates the earlier itemisation published in 1999 and takes into account experience accumulated thus far. The revised cost itemisation structure has sought to ensure that all costs within the planned scope of a decommissioning project may be reflected. The report also provides general guidance on developing a decommissioning cost estimate, including detailed advice on using the structure.
This publication addresses inspection basics, concepts and methods on how to plan inspection activities, perform inspections of safety related structures, systems and components, evaluate the safety significance of inspection findings, and document the results. It presents high level considerations for the inspection of selected programmatic areas including plant operations, radiation protection, fire protection and maintenance activities at nuclear power plants (NPPs). The publication focuses on the regulatory inspection of operating NPPs and, when applicable, describes how the same inspection techniques can be applied to facilities undergoing construction, preoperational testing, and decommissioning. The general techniques described may be also used in the inspection of other types of nuclear facilities.
This handbook is a practical aid to legislative drafting that brings together, for the first time, model texts of provisions covering all aspects of nuclear law in a consolidated form. Organized along the same lines as the Handbook on Nuclear Law, published by the IAEA in 2003, and containing updated material on new legal developments, this publication represents an important companion resource for the development of new or revised nuclear legislation, as well as for instruction in the fundamentals of nuclear law. It will be particularly useful for those Member States embarking on new or expanding existing nuclear programmes.
As the built environment ages, demolition has become a rapidly growing industry offering major employment opportunities. During the 1990s the number of contractors grew by nearly 60 percent and there are now over 800 US companies focused on demolition, as well as many more offering this service as part of their portfolio. It has also become an increasingly complex business, requiring a unique combination of project management skills, legal and contractual knowledge, and engineering skills from its practitioners. Created in partnership with the National Demolition Association, Demolition: Practices, Technology, and Management is written specifically with students of construction management and engineering in mind, although it will also be an invaluable reference resource for anyone involved in demolition projects. Since demolition has become such a central part of construction management, this audience includes practicing architects and engineers, general contractors, building and manufacturing facility owners, as well as government officials and regulators. Covered in the book is the full range of technical and management issues encountered by the demolition contractor and those who hire demolition contractors. These include modern demolition practices, the impact of different construction types, demolition regulations, estimating demolition work, demolition contracts, safety on the demolition project, typical demolition equipment, debris handling and recycling, use of explosives, demolition contractors' participation in disaster response, and demolition project management.