Download Free Static Compensators Statcoms In Power Systems Book in PDF and EPUB Free Download. You can read online Static Compensators Statcoms In Power Systems and write the review.

A static compensator (STATCOM), also known as static synchronous compensator, is a member of the flexible alternating current transmission system (FACTS) devices. It is a power-electronics based regulating device which is composed of a voltage source converter (VSC) and is shunt-connected to alternating current electricity transmission and distribution networks. The voltage source is created from a DC capacitor and the STATCOM can exchange reactive power with the network. It can also supply some active power to the network, if a DC source of power is connected across the capacitor. A STATCOM is usually installed in the electric networks with poor power factor or poor voltage regulation to improve these problems. In addition, it is used to improve the voltage stability of a network. This book covers STATCOMs from different aspects. Different converter topologies, output filters and modulation techniques utilized within STATCOMs are reviewed. Mathematical modeling of STATCOM is presented in detail and different STATCOM control strategies and algorithms are discussed. Modified load flow calculations for a power system in the presence of STATCOMs are presented. Several applications of STATCOMs in transmission and distribution networks are discussed in different examples and optimization techniques for defining the optimal location and ratings of the STATCOMs in power systems are reviewed. Finally, the performance of the network protection scheme in the presence of STATCOMs is described. This book will be an excellent resource for postgraduate students and researchers interested in grasping the knowledge on STATCOMs.
Provides insight on both classical means and new trends in the application of power electronic and artificial intelligence techniques in power system operation and control This book presents advanced solutions for power system controllability improvement, transmission capability enhancement and operation planning. The book is organized into three parts. The first part describes the CSC-HVDC and VSC-HVDC technologies, the second part presents the FACTS devices, and the third part refers to the artificial intelligence techniques. All technologies and tools approached in this book are essential for power system development to comply with the smart grid requirements. Discusses detailed operating principles and diagrams, theory of modeling, control strategies and physical installations around the world of HVDC and FACTS systems Covers a wide range of Artificial Intelligence techniques that are successfully applied for many power system problems, from planning and monitoring to operation and control Each chapter is carefully edited, with drawings and illustrations that helps the reader to easily understand the principles of operation or application Advanced Solutions in Power Systems: HVDC, FACTS, and Artificial Intelligence is written for graduate students, researchers in transmission and distribution networks, and power system operation. This book also serves as a reference for professional software developers and practicing engineers.
This Green Book offers the outstanding expertise of CIGRE professionals about Flexible AC Transmission Systems (FACTS) in one concise handbook. FACTS are used to enhance AC power networks, by providing fast control of power flows and AC voltage and AC phase angles. They can be used to defer the need for additional power lines, by controlling the power flow on lines to achieve maximum utilisation of the existing lines, and/or by improving the power quality, e.g. when large disturbing loads are connected to the network. This Green Book on FACTS provides comprehensive information about the use of Power Electronics for AC system control and for Power Quality Improvement in its over 1000 pages. This book has been written by experts in the field, who come from Transmission System Operators, Network owners, manufacturers, and consultants in this field. This Green Book on FACTS covers a large range of topics in its 6 sections, as follows: AC Systems Characteristics, AC network control using conventional means and AC network control using FACTS Controllers Technical Descriptions of all current FACTS controllers, power electronic Topologies for FACTS, SVCs, STATCOM, TCSC and the UPFC and its variations Application Examples of all FACTS controllers, which include a description of controllers using saturation of iron as well as examples of all current FACTS controllers Planning and Procurement, including economic appraisals and cost benefit analysis, planning studies, environmental considerations, functional specifications Implementation of FACTS controllers, including integration and design studies, equipment design and testing and commissioning FACTS operation and lifetime management.
A thorough and exhaustive presentation of theoretical analysis and practical techniques for the small-signal analysis and control of large modern electric power systems as well as an assessment of their stability and damping performance.
The first book to provide comprehensive coverage of FACTS power systems modeling and simulation. * Detailed coverage of the development of FACTS controllers and guidance on the selection of appropriate equipment * Computer modelling examples of the FACTS controllers for steady-state and transient stability systems * Numerous case studies and practical examples
An important new resource for the international utility market Over the past two decades, static reactive power compensators have evolved into a mature technology and become an integral part of modern electrical power systems. They are one of the key devices in flexible AC transmission systems (FACTS). Coordination of static compensators with other controllable FACTS devices promises not only tremendously enhanced power system controllability, but also the extension of power transfer capability of existing transmission corridors to near their thermal capacities, thus delaying or even curtailing the need to invest in new transmission facilities. Offering both an in-depth presentation of theoretical concepts and practical applications pertaining to these power compensators, Thyristor-Based FACTS Controllers for Electrical Transmission Systems fills the need for an appropriate text on this emerging technology. Replete with examples and case studies on control design and performance, the book provides an important resource for both students and engineers working in the field.
Key Features:Concepts are explained with illustrative examples and case studies. Applications of SVC, TCSC, GCSC, SPST, STATCOM, SSSC, UPFC, IPFC and IPC for voltage/power control in transmission systems. Application of DSTATCOM, DVR and UPQC for improving power quality in distribution systems. Design of Power Oscillation Damping (POD) controllers. Mitigation of SSR using series FACTS Controllers. About the Book:The emerging technology of Flexible AC Transmission System (FACTS) enables planning and operation of power systems at minimum cost, without compromising security. This is based on modern high power electronic systems that provide fast controllability to ensure 'flexible' operation under changing system conditions. This book presents a comprehensive treatment of the subject by discussing the operating principles, mathematical models, control design and issues that affect the applications.
Within this book the fundamental concepts associated with the topic of power electronic control are covered alongside the latest equipment and devices, new application areas and associated computer-assisted methods. *A practical guide to the control of reactive power systems *Ideal for postgraduate and professional courses *Covers the latest equipment and computer-aided analysis.
The Flexible AC Transmission System (FACTS)--a new technology based on power electronics--offers an opportunity to enhance controllability, stability, and power transfer capability of ac transmission systems. Two pioneers in the field provide in-depth discussions on power semiconductor devices, voltage-sourced and current-sourced converters, specific FACTS controllers, and major FACTS applications in the U.S.
Presents Fundamentals of Modeling, Analysis, and Control of Electric Power Converters for Power System Applications Electronic (static) power conversion has gained widespread acceptance in power systems applications; electronic power converters are increasingly employed for power conversion and conditioning, compensation, and active filtering. This book presents the fundamentals for analysis and control of a specific class of high-power electronic converters—the three-phase voltage-sourced converter (VSC). Voltage-Sourced Converters in Power Systems provides a necessary and unprecedented link between the principles of operation and the applications of voltage-sourced converters. The book: Describes various functions that the VSC can perform in electric power systems Covers a wide range of applications of the VSC in electric power systems—including wind power conversion systems Adopts a systematic approach to the modeling and control design problems Illustrates the control design procedures and expected performance based on a comprehensive set of examples and digital computer time-domain simulation studies This comprehensive text presents effective techniques for mathematical modeling and control design, and helps readers understand the procedures and analysis steps. Detailed simulation case studies are included to highlight the salient points and verify the designs. Voltage-Sourced Converters in Power Systems is an ideal reference for senior undergraduate and graduate students in power engineering programs, practicing engineers who deal with grid integration and operation of distributed energy resource units, design engineers, and researchers in the area of electric power generation, transmission, distribution, and utilization.