Download Free Seismic Hazards And Geologic Hazards Related To Comprehensive Planning In Utah Book in PDF and EPUB Free Download. You can read online Seismic Hazards And Geologic Hazards Related To Comprehensive Planning In Utah and write the review.

The purpose of these guidelines for investigating geologic hazards and preparing engineering-geology reports, is to provide recommendations for appropriate, minimum investigative techniques, standards, and report content to ensure adequate geologic site characterization and geologic-hazard investigations to protect public safety and facilitate risk reduction. Such investigations provide important information on site geologic conditions that may affect or be affected by development, as well as the type and severity of geologic hazards at a site, and recommend solutions to mitigate the effects and the cost of the hazards, both at the time of construction and over the life of the development. The accompanying suggested approach to geologic-hazard ordinances and school-site investigation guidelines are intended as an aid for land-use planning and regulation by local Utah jurisdictions and school districts, respectively. Geologic hazards that are not accounted for in project planning and design often result in additional unforeseen construction and/or future maintenance costs, and possible injury or death.
This report presents the results of the Utah Quaternary Fault Parameters Working Group (hereafter referred to as the Working Group) review and evaluation of Utah’s Quaternary fault paleoseismic-trenching data. The purpose of the review was to (1) critically evaluate the accuracy and completeness of the paleoseismictrenching data, particularly regarding earthquake timing and displacement, (2) where the data permit, assign consensus, preferred recurrence-interval (RI) and vertical slip-rate (VSR) estimates with appropriate confidence limits to the faults/fault sections under review, and (3) identify critical gaps in the paleoseismic data and recommend where and what kinds of additional paleoseismic studies should be performed to ensure that Utah’s earthquake hazard is adequately documented and understood. It is important to note that, with the exception of the Great Salt Lake fault zone, the Working Group’s review was limited to faults/fault sections having paleoseismic-trenching data. Most Quaternary faults/fault sections in Utah have not been trenched, but many have RI and VSR estimates based on tectonic geomorphology or other non-trench-derived studies. Black and others compiled the RI and VSR data for Utah’s Quaternary faults, both those with and without trenches.
Large, damaging earthquakes can happen in many parts of Utah. Therefore, when choosing where to live in this state, we should be aware of the earthquake risk. It is important to know what potential earthquake hazards exist in an area, and what action we can take to reduce the earthquake risk to ourselves and our families. This brochure introduces homebuyers and others to earthquake hazards so that informed choices can be made when selecting homes, building sites, or hazard-reduction measures.
Geologic exposures in the Salt Lake City region record a long history of sedimentation and tectonic activity extending back to the Precambrian Era. Today, the city lies above a deep, sediment-filled basin flanked by two uplifted range blocks, the Wasatch Range and the Oquirrh Mountains. The Wasatch Range is the easternmost expression of major Basin and Range extension in north-central Utah and is bounded on the west by the Wasatch fault zone (WFZ), a major zone of active normal faulting. During the late Pleistocene Epoch, the Salt Lake City region was dominated by a succession of inter-basin lakes. Lake Bonneville was the last and probably the largest of these lakes. By 11,000 yr BP, Lake Bonneville had receded to approximately the size of the present Great Salt Lake.