Download Free Seismic Design And Retrofit Issues For Bridges In New Jersey Book in PDF and EPUB Free Download. You can read online Seismic Design And Retrofit Issues For Bridges In New Jersey and write the review.

Because of their structural simplicity, bridges tend to beparticularly vulnerable to damage and even collapse when subjectedto earthquakes or other forms of seismic activity. Recentearthquakes, such as the ones in Kobe, Japan, and Oakland,California, have led to a heightened awareness of seismic risk andhave revolutionized bridge design and retrofit philosophies. In Seismic Design and Retrofit of Bridges, three of the world's topauthorities on the subject have collaborated to produce the mostexhaustive reference on seismic bridge design currently available.Following a detailed examination of the seismic effects of actualearthquakes on local area bridges, the authors demonstrate designstrategies that will make these and similar structures optimallyresistant to the damaging effects of future seismicdisturbances. Relying heavily on worldwide research associated with recentquakes, Seismic Design and Retrofit of Bridges begins with anin-depth treatment of seismic design philosophy as it applies tobridges. The authors then describe the various geotechnicalconsiderations specific to bridge design, such as soil-structureinteraction and traveling wave effects. Subsequent chapters coverconceptual and actual design of various bridge superstructures, andmodeling and analysis of these structures. As the basis for their design strategies, the authors' focus is onthe widely accepted capacity design approach, in which particularlyvulnerable locations of potentially inelastic flexural deformationare identified and strengthened to accommodate a greater degree ofstress. The text illustrates how accurate application of thecapacity design philosophy to the design of new bridges results instructures that can be expected to survive most earthquakes withonly minor, repairable damage. Because the majority of today's bridges were built before thecapacity design approach was understood, the authors also devoteseveral chapters to the seismic assessment of existing bridges,with the aim of designing and implementing retrofit measures toprotect them against the damaging effects of future earthquakes.These retrofitting techniques, though not considered appropriate inthe design of new bridges, are given considerable emphasis, sincethey currently offer the best solution for the preservation ofthese vital and often historically valued thoroughfares. Practical and applications-oriented, Seismic Design and Retrofit ofBridges is enhanced with over 300 photos and line drawings toillustrate key concepts and detailed design procedures. As the onlytext currently available on the vital topic of seismic bridgedesign, it provides an indispensable reference for civil,structural, and geotechnical engineers, as well as students inrelated engineering courses. A state-of-the-art text on earthquake-proof design and retrofit ofbridges Seismic Design and Retrofit of Bridges fills the urgent need for acomprehensive and up-to-date text on seismic-ally resistant bridgedesign. The authors, all recognized leaders in the field,systematically cover all aspects of bridge design related toseismic resistance for both new and existing bridges. * A complete overview of current design philosophy for bridges,with related seismic and geotechnical considerations * Coverage of conceptual design constraints and their relationshipto current design alternatives * Modeling and analysis of bridge structures * An exhaustive look at common building materials and theirresponse to seismic activity * A hands-on approach to the capacity design process * Use of isolation and dissipation devices in bridge design * Important coverage of seismic assessment and retrofit design ofexisting bridges
This report presents the results of the second phase of a comprehensive analytical study on the seismic response of highway bridges in New Jersey. Most bridges in New Jersey are multi-span simply supported (MSSS) where due to impact at the joints the seismic response is highly nonlinear. Therefore, detailed seismic analysis of essential bridges should employ nonlinear computer models that consider the important behavioral characteristics. Among these are: behavior of steel bearings, impact between adjacent spans and between the end-span and the abutment, soil-structure interaction, frictional characteristics following bearing failure, plastic hinges and/or shear failure at the columns, and combined effect of horizontal and transverse ground motion excitations. In light of these, the overall objective of this phase of the study was to evaluate the nonlinear seismic response of actual bridges with emphasis on soil-structure interaction and three-dimensional effect of ground motion. Furthermore, capacity/demand ratios for various components were determined based on the Federal Highway Administration's seismic retrofitting manual for highway bridges.
Bridge structures can give the impression that they are rather simple structural systems, whose seismic responses can be easily predicted. On the contrary, however, many bridges did not perform well in recent earthquakes, showing a need for increased research to understand various potential problems and collapse mechanisms. Indeed, progress has been made lately in design and assessment procedures around the world, and consequently many practices have changed. In this context, the objective of fib Bulletin 39 is to present, discuss and critically compare structural solutions for bridge seismic design and retrofit that have been developed and are now used all over the world, ten years after the publication of the last comprehensive manual on the subject. It is the result of the work of an international team of experts that collaborated intensively for over three years. The first four chapters of the Bulletin present a regional review of design choices, compare and discuss international design practices, and indicate their relative merits and potential problems. Current developments are treated in the next three chapters, with particular emphasis on design for enhanced damage control, for spatial variation of ground motion and for fault crossing. The last part presents a summary of current issues related to existing bridges. Extensive technical developments have been taking place in the last two decades with the goal of making bridges an important transportation infrastructure with limited damage during earthquakes. Realising this goal depends on regional seismicity, transportation systems, seismic performance goals, local cultures, and a wide range of design and construction practices, which are presented and discussed in this Bulletin.
Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection highlights bridge engineering specimens from around the world, contains detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject. Published in five books: Fundamentals, Superstructure Design, Substructure Design, Seismic Design, and Construction and Maintenance, this new edition provides numerous worked-out examples that give readers step-by-step design procedures, includes contributions by leading experts from around the world in their respective areas of bridge engineering, contains 26 completely new chapters, and updates most other chapters. It offers design concepts, specifications, and practice, as well as the various types of bridges. The text includes over 2,500 tables, charts, illustrations, and photos. The book covers new, innovative and traditional methods and practices; explores rehabilitation, retrofit, and maintenance; and examines seismic design and building materials. The fourth book, Seismic Design contains 18 chapters, and covers seismic bridge analysis and design. What’s New in the Second Edition: Includes seven new chapters: Seismic Random Response Analysis, Displacement-Based Seismic Design of Bridges, Seismic Design of Thin-Walled Steel and CFT Piers, Seismic Design of Cable-Supported Bridges, and three chapters covering Seismic Design Practice in California, China, and Italy Combines Seismic Retrofit Practice and Seismic Retrofit Technology into one chapter called Seismic Retrofit Technology Rewrites Earthquake Damage to Bridges and Seismic Design of Concrete Bridges chapters Rewrites Seismic Design Philosophies and Performance-Based Design Criteria chapter and retitles it as Seismic Bridge Design Specifications for the United States Revamps Seismic Isolation and Supplemental Energy Dissipation chapter and retitles it as Seismic Isolation Design for Bridges This text is an ideal reference for practicing bridge engineers and consultants (design, construction, maintenance), and can also be used as a reference for students in bridge engineering courses.
Mitigating the effects of earthquakes is crucial to bridge design. With chapters culled from the best-selling Bridge Engineering Handbook, this volume sets forth the principles and applications of seismic design, from the necessary geotechnical and dynamic analysis background to seismic isolation and energy dissipation, active control, and retrofit
Nonlinear static monotonic (pushover) analysis has become a common practice in performance-based bridge seismic design. The popularity of pushover analysis is due to its ability to identify the failure modes and the design limit states of bridge piers and to provide the progressive collapse sequence of damaged bridges when subjected to major earthq