Download Free Saeq Issue 10 Book in PDF and EPUB Free Download. You can read online Saeq Issue 10 and write the review.

Issue 10 October-November-December 2016 Assessment Of Material Strength Properties Of One Scale Level Transferred From Test Data At Another Level A.M. Pashayev, A.Kh. Janahmadov, M.Y. Javadov The paper examines the forecast methods of failure process dynamics at one scale level based on parameters defined at another level. The industrial forecast methods were developed suited for engineering practice. The specific scale levels of fracturing are considered on the basis of the dynamic process characteristics and the space-time approach. Space-Time Scale Invariance At Dynamic Fragmentation Of Quasi-Brittle Materials N.G. Javadov, M.I. Aliyev The paper examines the fractured quasi-brittle materials and the scale invariance with respect to time and space variables. It confirms that the large-scale clustering in the ensemble of defects, accompanying the transition from the dispersed to the microscopic resolution, have the signs of phenomena that is characteristic to non-equilibrium critical systems. It demonstrates that with respect to the quasi-brittle materials, the dissipative ability is associated with the scenarios of formation and interaction of the multi-scale collective defect modes in conditions of the specific type of the critical events – the structural scaling transitions. Nano-Tribological Processes At Electric Discharge Of Discrete Ohmic Contacts Of Metal-Polymer Pairs A.Kh. Janahmadov, A.I. Volchenko, E.S. Pirverdiyev The paper examines the nano-tribological processes at the electrical discharge in the discrete ohmic contacts of the metal-polymer pairs of tribosystem. The nature of destructive processes in the polymeric film of pads is explained. Adjusting The Starting Pressure Of Gas Lift Well To The “Switching Lifting Device Of The Reverse Valves System” O.H. Mirzayev The results of starting pressure change by switching injection direction of working agent from circular annulus to the central part in gas lift wells have been given. The valves are placed on the pipe surface in definite depth under liquid column. As a result of investigation it has been determined that the application of the method in the wells with big depth and high liquid column gives an opportunity to reduce starting pressure. Application of the method in complicated exploitation conditions gives effective results. Comparative Analysis Of Trading Systems Performances With Respect To Transaction Cost (Part 2) E.J. Janahmadov The purpose of this paper is to compare and analyze the performance of trading rules applied to the underlying and derivative products. Three different trading market indictors were chosen from the range of trading rules according to their performance relatively to Dow Jones Industrial Average. On the basis of these technical indicators the automated trading systems were developed and then applied to the underlying instrument such Dow Jones Industrial Average. The performances of trading systems and profit/loss indexes were compared and analyzed. The results are compared with “buy-and-hold” strategy and performance of underlying security. The results of the research intend to show the effect of the transactions costs on the performance of trading systems and optimal could be applied to invest into underlying or derivatives of underlying.
Issue 16 July-Aug-Sept 2018
Issue 15 Apr-May-June 2018
Issue 12 April-May-June 2017
Issue 03 Apr-May-June 2014 The Frictional Interaction In Electrical And Thermal Fields Of Metal Friction Pairs A.Kh. Janahmadov, A.I. Volchenko, E.S. Pirverdiev, D.A. Volchenko, N.A. Volchenko, D.Y. Zhuravlev The article examines the origins and development of the electrical and thermal explosions in the polymer lining subsurface layers, as well as the discharge penetrating through the layers of micro-protrusions. The Development Of Mathematical Models With “Skin-Factor” For The Petroleum Reservoir Filtration Ab.G. Rzaev, S.R. Rasulov, I.A. Abbasova, S.N. Rahimova The paper proposes a modified Dupuis formula, which describes the filtration process based on “skin-factor” of the polluted near oil-well area. The viability of proposed model is provided. The regularities of the reaction-regeneration cycles are established. The Safety Management Based On The Probabilistic Risk Assessment T.R. Jafarzade The probability estimation of potentially dangerous (basis) events is conducted on the basis of the current values of the risk factor given the risk significance of the individual components responsible for the flight safety. The flight is viewed as a random process described by a stochastic differential equation. The author raises the issue of absolute and guaranteed safety. The Mass-Transfer At The Wastewater Countercurrent Extraction Processes Inside Of The Spray Tower And Its Modeling A.A. Gasanov The wastewater treatment technology is developed on the basis of the solvent extraction using a spray extractor. In the paper the optimal process parameters are proposed and the consumption rates for continuous and dispersed phases are justified. The research results of the wastewater treatment produced by the paint and varnish manufacturers from butylglycol, phenilizopropanol, acetic acid and acetylacetone are included in the paper. The mathematical model of process is proposed; the specific area of the contact surface, the distance between the extractor cells, the coefficients of mass-impact and mass-transfer of the phase components are defined; the component concentrations in opposite phases and the aggregate height are calculated. The Deformation And Break Up Of Drops And Bubbles In The Isotropic Turbulent Flows G.I. Kelbaliyev, L.V. Guseynova, S.R. Rasulov, G.Z. Suleymanov The research paper is dedicated to the phenomena of deformation and break up of drops in the isotropic turbulent flow. The phenomena has been analyzed, modeled and compared with the experimental data. As a result of that research, the analytical solution is provided for the given problem, the expressions for estimation of the deformation level and the break up frequency depending on Red and Mo numbers have been obtained.
Issue 05 Oct-Nov-Dec 2014
Issue 13 July-Aug-Sept 2017 Armenian Terrorism in Nagrono-Karabakh Azerbaijan First Scientific Discovery Azerbaijani Manat, its History and Origin Upcoming Birthdays Tribological Aspects of Physical Mesomechanics A.M. PASHAYEV, A.KH. JANAHMADOV, N.G. JAVADOV, M.Y. JAVADOV Experimental Research of Transducer for Measurement of Concentration of Hydrogen in Gas Mixtures A.A. SAFAROVA Efficiency of Offshore Gaspipelines E.Kh. ISKANDEROV Pricing Asian Options with Monto Carlo Method E.A. JANAHMADOV
Issue 07 Jan-Feb-Mar 2016 Assessment Of Irregularities-Bursts And Catastrophic Changes In Compressor Units A.M. Pashayev, A.Kh. Janahmadov, N.G. Javadov, M.Y. Javadov The paper assesses the type of irregularities of type bursts and disastrous wear during operation of the tested CU equipment. Using the flicker-noise spectroscopy (FNS), which is used to estimated the parameters of the singular component of the power spectrum of the signal and find significant changes in the dimensionless parameters of unsteadiness providing an indication of the approaching moments of a catastrophic deterioration of the equipment. Mineral Composition And Textural-Structural Peculiarities Of Ore, And Mineral Formation Stage Of The Gedabey Gold-Copper Deposit (Lesser Caucasus) M. Aliyev, G. Huseynov The mineral composition and textural and structural characteristics of ores are studied, also the phases and stages of mineralization, which are an important source of information on the conditions of formation of the deposit, time allocation of gold and its spatial association with certain mineral assemblages and associations. Consideration of these issues can come to an understanding of the factors behind the differences in the scale and extent of gold deposits of various types, as well as to form a mineralogical search features gold-bearing mineralization. Development Of Decision-Making Algorithm On Efficiency Of Operators And Traffic Controllers Of Air Transport Based On Their Psycho-Physiological Conditions And Productivities R.M. Jafarzade, T.R. Jafarzade By processing the data on the human-operator active performance with respect to their psycho-physiological conditions and productivities in the human-machine systems, we developed the algorithm for the possibilities of further execution of their (operator) duties in the incomplete and unclear initial data. Using fuzzy clustering and the interval fuzzy sets of the second type, and the coordinated assessment of expert opinions on the binary relationship of objects from the class with recommendations on the further implementation of their activities, we obtained the individual assessment of the alternative recommendations for each of the tested objects from the set of objects. The calculation for the experimental data is provided. The proposed approach can be used for the adaptive selection of recommendations on the continuation of duties of air operators and air traffic controllers by taking into account the dynamic of changes of their psycho-physiological states and productivities. Management Of Portfolio Of Securities On The Basis Of Minimization Of The Conditional Expected Losses S.M. Javadova On the basis of a method of empirical averages for the general problem of stochastic programming, convergence of the solution of an approximating task to the solution of a problem of conditional minimization of the expected losses when forming an investment portfolio is proved. Numerical calculations on a concrete example of two joint stock companies are received by means of the program of linear programming in MATLAB system.
Issue 08 April-May-June 2016 Optimization Of Technological Processes For Machine Parts And Equipment Operating in Extreme Conditions A.M. Gafarov, P.G. Suleymanov, V.A. Gafarov The paper reviews the aspects of optimization of the technological processes for high-precision machine parts and equipment operating in extreme conditions. The obtained results are analyzed. Ratio Of Power Indicators In The System "Drilling String – Drive" B.A. Perminov, V.B. Perminov, Z.H. Yagubov, E.Z. Yagubov In the mode of drilling a well, transmission of rotation the drill string, occur from the wellhead to the bottom hole. Thus, at the expense to the impact dissipative forces on the drill string in the bore-hole may be stop of some part column, twisting of stretched portion and stall bottom of column with accelerate of rotation after accumulating a sufficient level of potential energy. The stock of potential energy in the elastic column at the rotation of upper part the greater, the more moment of resistance of stationary portion column. Take place redistribution of power indicators along the length of the drill string, that engender relaxation oscillations in the column, to the disruption of the dynamic balance, as condition of the column, so and system "drill string – drive", violates the dynamic stability of column and leads to a forced harmonic changes power of the drive of engine rig. In this regard, the definition of conditions for the occurrence of relaxation oscillations in the system “drill string – drive” is a very urgent task. Work is devoted to research of the power indicators of the drill string in the drilling operation and the definition of the necessary conditions for maintaining the dynamic equilibrium of the system. It was shown that the accumulation of potential energy in the bottom of the column is more than the kinetic energy of the upper part always provokes relaxation oscillations in the system. Makes recommendation, that to enhance the dynamic stability of the work regime is necessary increase the moment of inertia of the drive of column and reduce the weight of the bottom hole of column. Integrated Mechanisms For Data Security And Reliability In Information Systems Based On Theoretical Coding Schemes Kh.N. Rzaev The paper examines the cryptographic data protection to ensure the security of the data transfer through the means of information systems. The author carried out the comparative studies on the integrated security mechanisms to provide the reliability of transferred data by using the McEliece and Niederreiter (asymmetric) crypto-systems based on the m-tuple error-correcting codes. Application of Water-Flooding Method to Improve The Potential Oil Recovery D.A. Volchenko, G.F. Miralamov, V.R. Roznyi The paper examines the water-flooding method to improve the potential oil recovery by adjusting the properties of reagents in the water solution. Effect Of Abnormal Oil On Performance Of Well Bottom Zone T.Sh. Salavatov, I.I. Kirdoba, M.A. Dadashzadeh The article studies in detail the effect of various factors of the abnormal oil on the performance of well bottom zone.
Issue 09 July-August-September 2016 The Creation Of Fluid And Gas Mechanics Basis In The Micro-Cracked Channel R.S. Gurbanov, M.A. Mammadova, A.A. Hajiyev There are experimental investigations of the fluids flow in the small-sized channels, the hydraulic resistances results of which are more than the estimated ones according to theoretical formulas and different supposed explanations without the quantitative evolution have been given in the reference. Taking into consideration this situation in the mechanics we were conducted the experiments in special developed unit with different fluids: water, viscous and anomalous oils. The results of the numerous experimental investigations for deter- mining new effect of fluid mechanics in the micro-cracked channels have been given in this work. Firstly the experimental-estimated methodology in the “micro-crack fluid” system has been proposed and realized for the quantita- tive estimation of the hydraulic resistances. This approach allows to conduct hydrodynamic engineering estimations for fluids flow in the fractured-porous medium, in the mechanical engineering, in the lubrication systems of instrument engineering and also for solutions of the sealing problems in different branches of industry and medicine. Multi-Criterial Estimation Of The Level Of Corrosion Damage Of The Gas-Pipeline Areas In The Ambiguous Expert Opinions S.A. Aghammadova The linguistic model has-been developed for the estimation of the corrosion damage level of the gas-pipeline areas in the optimistic and the pessimistic expert opinions of the influencing factors. For solving of the given task generalization of the method of multi-criterial choice of the best alternative in the case of rules of fuzzy productions has been chosen, antecedents and consequents of which have been by fuzzy sets with multi-semi functions of belonging. Wavelet Method For Solving Problems Of Unsteady Fluid Filtration In The Crack-Porous Ring Type Formation O.A. Dyshin Based on the multiple-scale analysis in L^2(R^3) using discrete wavelet transform with separable orthonormal basis we’ve developed a method of sustainable approximate calculation of the classical solution of the initial-boundary value problem of unsteady fluid filtration in the crack-porous ring-type formation. The problem is reduced to solving ill-posed problem of finding the solution of linear polynomial equation given inaccurate data, when the approximate solution constructed by regularization method is stable with respect to error in differential equations ratios and boundary conditions set up, as well as set up right member falseness. Decision Making In The Multi-Criteria Problems Of Alternatives Using The Bayesian Interval Inference Methods R.F. Hajiyeva The Bayesian inference method is used in the decision process of the multi-criteria problems using the strength of information on the product rules. Using these mechanisms the point and interval estimates of the posterior probabilities are built on their prior probabilities, derived from the composite aggregation rules of the alternative description information of the decision-maker preferences defined by a fuzzy expert judgements. These decision logic is applied to the problem of selecting a candidate on the vacant faculty position in university Comparative Analysis Of Trading Systems Performances With Respect To Transaction Cost E.J. Janahmadov The purpose of this paper is to compare and analyze the performance of trading rules applied to the underlying and derivative products. Three different trading market indictors were chosen from the range of trading rules according to their performance relatively to Dow Jones Industrial Average. On the basis of these technical indicators the automated trading systems were developed and then applied to the underlying instrument such Dow Jones Industrial Average. The performances of trading systems and profit/loss indexes were compared and analyzed. The results are compared with “buy-and-hold” strategy and performance of underlying security. The results of the research intend to show the effect of the transactions costs on the performance of trading systems and optimal could be applied to invest into underlying or derivatives of underlying.