Download Free Reconfigurable Flight Control For The X 33 Vehicle Book in PDF and EPUB Free Download. You can read online Reconfigurable Flight Control For The X 33 Vehicle and write the review.

Two methods for control system reconfiguration have been investigated. The first method is a robust servomechanism control approach (optimal tracking problem) that is a generalization of the classical proportional-plus-integral control to multiple input-multiple output systems. The second method is a control-allocation approach based on a quadratic programming formulation. A globally convergent fixed-point iteration algorithm has been developed to make onboard implementation of this method feasible. These methods have been applied to reconfigurable entry flight control design for the X-33 vehicle. Examples presented demonstrate simultaneous tracking of angle-of-attack and roll angle commands during failures of the right body flap actuator. Although simulations demonstrate success of the first method in most cases, the control-allocation method appears to provide uniformly better performance in all cases.
A quaternion-based attitude control system is developed for the X-33 in the ascent flight phase. A nonlinear control law commands body-axis rotation rates that align the angular velocity vector with an Euler axis defining the axis of rotation that will rotate the body-axis system into a desired-axis system. The magnitudes of the commanded body rates are determined by the magnitude of the rotation error. The commanded body rates form the input to a dynamic inversion-based adaptive/reconfigurable control law. The indirect adaptive control portion of the control law uses online system identification to estimate the current control effectiveness matrix to update a control allocation module. The control allocation nominally operates in a minimum deflection mode; however, if a fault is detected, it can operate in a null-space injection mode that excites and decorrelates the effectors without degrading the vehicle response to enable online system identification. The overall 5 stem is designed to provide fault and damage tolerance for the X-33 on ascent.
Aircraft Control Allocation Wayne Durham, Virginia Polytechnic Institute and State University, USA Kenneth A. Bordignon, Embry-Riddle Aeronautical University, USA Roger Beck, Dynamic Concepts, Inc., USA An authoritative work on aircraft control allocation by its pioneers Aircraft Control Allocation addresses the problem of allocating supposed redundant flight controls. It provides introductory material on flight dynamics and control to provide the context, and then describes in detail the geometry of the problem. The book includes a large section on solution methods, including 'Banks' method', a previously unpublished procedure. Generalized inverses are also discussed at length. There is an introductory section on linear programming solutions, as well as an extensive and comprehensive appendix dedicated to linear programming formulations and solutions. Discrete-time, or frame-wise allocation, is presented, including rate-limiting, nonlinear data, and preferred solutions. Key features: Written by pioneers in the field of control allocation. Comprehensive explanation and discussion of the major control allocation solution methods. Extensive treatment of linear programming solutions to control allocation. A companion web site contains the code of a MATLAB/Simulink flight simulation with modules that incorporate all of the major solution methods. Includes examples based on actual aircraft. The book is a vital reference for researchers and practitioners working in aircraft control, as well as graduate students in aerospace engineering.
Observer-based sliding mode control is investigated for application to aircraft reconfigurable flight control. An overview of reconfigurable flight control is given, including a review of the current state-of-the-art within the subdisciplines of fault detection parameter identification, adaptive control schemes, and dynamic control allocation. Of the adaptive control methods reviewed, sliding mode control (SMC) appears promising due its property of invariance to matched uncertainty. An overview of SMC is given and its properties are demonstrated. Sliding mode methods, however, are difficult to implement because unmodeled parasitic dynamics cause immediate and severe instability. This presents a challenge for all practical applications with limited bandwidth actuators. One method to deal with parasitic dynamics is the use of an asymptotic observer. Observer-based SMC is investigated, and a method for selecting observer gains is offered. An additional method for shaping the feedback loop using a filter is also developed. It is shown that this SMC prefilter is equivalent to a form of model reference hedging. A complete design procedure is given which takes advantage of the sliding mode boundary layer to recast the SMC as a linear control law. Frequency domain loop shaping is then used to design the sliding manifold. Finally, three aircraft applications are demonstrated. An F-18/HARV is used to demonstrate SISO and MIMO designs. The third application is a linear six degree-of-freedom advanced tailless fighter model. The observer-based SMC is seen to provide excellent tracking with superior robustness to parameter changes and actuator failures.
Written by leading experts in the field, this book provides the state-of-the-art in terms of fault tolerant control applicable to civil aircraft. The book consists of five parts and includes online material.
Unmanned marine vehicles (UMVs) include autonomous underwater vehicles, remotely operated vehicles, semi-submersibles and unmanned surface craft. Considerable importance is being placed on the design and development of such vehicles, as they provide cost-effective solutions to a number of littoral, coastal and offshore problems. This book highlights the advanced technology that is evolving to meet the challenges being posed in this exciting and growing area of research.