Download Free Radial Basis Function Rbf Neural Network Control For Mechanical Systems Book in PDF and EPUB Free Download. You can read online Radial Basis Function Rbf Neural Network Control For Mechanical Systems and write the review.

Radial Basis Function (RBF) Neural Network Control for Mechanical Systems is motivated by the need for systematic design approaches to stable adaptive control system design using neural network approximation-based techniques. The main objectives of the book are to introduce the concrete design methods and MATLAB simulation of stable adaptive RBF neural control strategies. In this book, a broad range of implementable neural network control design methods for mechanical systems are presented, such as robot manipulators, inverted pendulums, single link flexible joint robots, motors, etc. Advanced neural network controller design methods and their stability analysis are explored. The book provides readers with the fundamentals of neural network control system design. This book is intended for the researchers in the fields of neural adaptive control, mechanical systems, Matlab simulation, engineering design, robotics and automation. Jinkun Liu is a professor at Beijing University of Aeronautics and Astronautics.
A review of radial basis founction (RBF) neural networks. A novel sequential learning algorithm for minimal resource allocation neural networks (MRAN). MRAN for function approximation & pattern classification problems; MRAN for nonlinear dynamic systems; MRAN for communication channel equalization; Concluding remarks; A outline source code for MRAN in MATLAB; Bibliography; Index.
"Advanced Sliding Mode Control for Mechanical Systems: Design, Analysis and MATLAB Simulation" takes readers through the basic concepts, covering the most recent research in sliding mode control. The book is written from the perspective of practical engineering and examines numerous classical sliding mode controllers, including continuous time sliding mode control, discrete time sliding mode control, fuzzy sliding mode control, neural sliding mode control, backstepping sliding mode control, dynamic sliding mode control, sliding mode control based on observer, terminal sliding mode control, sliding mode control for robot manipulators, and sliding mode control for aircraft. This book is intended for engineers and researchers working in the field of control. Dr. Jinkun Liu works at Beijing University of Aeronautics and Astronautics and Dr. Xinhua Wang works at the National University of Singapore.
This book provides a comprehensive review of fundamental issues in the dynamical modeling and vibration control design for several flexible mechanical systems, such as flexible satellites, flexible aerial refueling hoses, and flexible three-dimensional manipulators. Offering an authoritative reference guide to the dynamics and control of flexible mechanical systems, it equips readers to solve a host of problems concerning these systems. It provides not only a complete overview of flexible systems, but also a better understanding of the technical levels involved. The book is divided into ten chapters: Chapters 1 and 2 lay the foundations, while the remaining chapters explore several independent yet related topics in detail. The book’s final chapter presents conclusions and recommendations for future research. Given its scope, the book is intended for researchers, graduate students, and engineers whose work involves control systems, flexible mechanical systems, and related areas.
Control systems include many components, such as transducers, sensors, actuators and mechanical parts. These components are required to be operated under some specific conditions. However, due to prolonged operations or harsh operating environment, the properties of these devices may degrade to an unacceptable level, causing more regular fault occurrences. It is therefore necessary to diagnose faults and provide the fault-accommodation control which compensates for the fault of the component by substituting a configuration of redundant elements so that the system continues to operate satisfactorily. In this book, we present a result of several years of work in the area of fault diagnosis and fault-accommodation control. It aims at information estimate methods when faults occur. The book uses the model built from the plant or process, to detect and isolate failures, in contrast to traditional hardware or statistical technologies dealing with failures. It presents model-based learning and design technologies for fault detection, isolation and identification as well as fault-tolerant control. These models are also used to analyse the fault detectability and isolability conditions and discuss the stability of the closed-loop system. It is intended to report new technologies in the area of fault diagnosis, covering fault analysis and control strategies of design for various applications. The book addresses four main schemes: modelling of actuator or sensor faults; fault detection and isolation; fault identification, and fault reconfiguration (accommodation) control. It also covers application issues in the monitoring control of actuators, providing several interesting case studies for more application-oriented readers.
This volume is the first to present a unified perspective on the control of underactuated mechanical systems. Based on real-time implementation of parameter identification, this book provides a variety of algorithms for the Furuta pendulum and the inertia wheel pendulum, which are two-degrees-of-freedom mechanical systems. Specifically, this work addresses and solves the problem of motion control via trajectory tracking in one joint coordinate while another joint is regulated. Besides, discussions on extensions to higher degrees-of-freedom systems are given. The book, aimed at control engineers as well as graduate students, ranges from the problem of parameter identification of the studied systems to the practical implementation of sophisticated motion control algorithms. Offering real-world solutions to manage the control of underactuated systems, this book provides a concise tutorial on recent breakthroughs in the field, original procedures to achieve bounding of the error trajectories, convergence and gain tuning guidelines.
The International Conference on Engineering Research and Applications (ICERA 2022), held on December 1-2, 2022, at Thai Nguyen University of Technology in Thai Nguyen, Vietnam, provided an international forum to disseminate information on latest theories and practices in engineering research and applications. The conference focused on original research work in areas including mechanical engineering, materials and mechanics of materials, mechatronics and micro mechatronics, automotive engineering, electrical and electronics engineering, information and communication technology. By disseminating the latest advances in the field, the Proceedings of ICERA 2022, Advances in Engineering Research and Application, assists academics and professionals alike to reshape their thinking on sustainable development.
Intelligent technologies have emerged as imperative tools in computer science and information security. However, advanced computing practices have preceded new methods of attacks on the storage and transmission of data. Developing approaches such as image processing and pattern recognition are susceptible to breaches in security. Modern protection methods for these innovative techniques require additional research. The Handbook of Research on Intelligent Data Processing and Information Security Systems provides emerging research exploring the theoretical and practical aspects of cyber protection and applications within computer science and telecommunications. Special attention is paid to data encryption, steganography, image processing, and recognition, and it targets professionals who want to improve their knowledge in order to increase strategic capabilities and organizational effectiveness. As such, this book is ideal for analysts, programmers, computer engineers, software engineers, mathematicians, data scientists, developers, IT specialists, academicians, researchers, and students within fields of information technology, information security, robotics, artificial intelligence, image processing, computer science, and telecommunications.
This book aims at investigating PDE modeling and vibration control of some typical mechanical distributed parameter systems. Several control methods are proposed to realize stabilization of the closed-loop system with the help of mathematical tools and stability analysis methods. Besides, some common engineering problems, such as input and output constraints, are also involved in the control design. This book offers a comprehensive introduction of mechanical distributed parameter systems, including PDE modeling, controller design and stability analysis. The related fundamental mathematical tools and analytical approaches involving in the PDE modeling and controller are also provided, which broadens its reach to readers.