Download Free Programming With Micropython Book in PDF and EPUB Free Download. You can read online Programming With Micropython and write the review.

It’s an exciting time to get involved with MicroPython, the re-implementation of Python 3 for microcontrollers and embedded systems. This practical guide delivers the knowledge you need to roll up your sleeves and create exceptional embedded projects with this lean and efficient programming language. If you’re familiar with Python as a programmer, educator, or maker, you’re ready to learn—and have fun along the way. Author Nicholas Tollervey takes you on a journey from first steps to advanced projects. You’ll explore the types of devices that run MicroPython, and examine how the language uses and interacts with hardware to process input, connect to the outside world, communicate wirelessly, make sounds and music, and drive robotics projects. Work with MicroPython on four typical devices: PyBoard, the micro:bit, Adafruit’s Circuit Playground Express, and ESP8266/ESP32 boards Explore a framework that helps you generate, evaluate, and evolve embedded projects that solve real problems Dive into practical MicroPython examples: visual feedback, input and sensing, GPIO, networking, sound and music, and robotics Learn how idiomatic MicroPython helps you express a lot with the minimum of resources Take the next step by getting involved with the Python community
Quickly learn to program for microcontrollers and IoT devices without a lot of study and expense. MicroPython and controllers that support it eliminate the need for programming in a C-like language, making the creation of IoT applications and devices easier and more accessible than ever. MicroPython for the Internet of Things is ideal for readers new to electronics and the world of IoT. Specific examples are provided covering a range of supported devices, sensors, and MicroPython boards such as Pycom’s WiPy modules and MicroPython’s pyboard. Never has programming for microcontrollers been easier. The book takes a practical and hands-on approach without a lot of detours into the depths of theory. The book: Shows a faster and easier way to program microcontrollers and IoT devices Teaches MicroPython, a variant of one of the most widely used scripting languages Is friendly and accessible to those new to electronics, with fun example projects What You'll Learn Program in MicroPython Understand sensors and basic electronics Develop your own IoT projects Build applications for popular boards such as WiPy and pyboard Load MicroPython on the ESP8266 and similar boards Interface with hardware breakout boards Connect hardware to software through MicroPython Explore the easy-to-use Adafruit IO connecting your microcontroller to the cloud Who This Book Is For Anyone interested in building IoT solutions without the heavy burden of programming in C++ or C. The book also appeals to those wanting an easier way to work with hardware than is provided by the Arduino and the Raspberry Pi platforms.
Learn how you can control LEDs, make music, and read sensor data using popular microcontrollers such as Adafruit Circuit Playground, ESP8266, and the BBC micro:bit Key Features Load and execute your first program with MicroPython Program an IoT device to retrieve weather data using a RESTful API Get to grips with integrating hardware, programming, and networking concepts with MicroPython Book Description MicroPython is an open source implementation of Python 3 that runs in embedded environments. With MicroPython, you can write clean and simple Python code to control hardware instead of using complex low-level languages like C and C++. This book guides you through all the major applications of the MicroPython platform to build and program projects that use microcontrollers. The MicroPython book covers recipes that'll help you experiment with the programming environment and hardware programmed in MicroPython. You'll find tips and techniques for building a variety of objects and prototypes that can sense and respond to touch, sound, position, heat, and light. This book will take you through the uses of MicroPython with a variety of popular input devices and sensors. You'll learn techniques for handling time delays and sensor readings, and apply advanced coding techniques to create complex projects. As you advance, you'll get to deal with Internet of Things (IoT) devices and integration with other online web services. Furthermore, you'll also use MicroPython to make music with bananas and create portable multiplayer video games that incorporate sound and light animations into the game play. By the end of the book, you'll have mastered tips and tricks to troubleshoot your development problems and push your MicroPython project to the next level! What you will learn Execute code without any need for compiling or uploading using REPL (read-evaluate-print-loop) Program and control LED matrix and NeoPixel drivers to display patterns and colors Build projects that make use of light, temperature, and touch sensors Configure devices to create Wi-Fi access points and use network modules to scan and connect to existing networks Use Pulse Width Modulation to control DC motors and servos Build an IoT device to display live weather data from the Internet at the touch of a button Who this book is for If you want to build and program projects that use microcontrollers, this book will offer you dozens of recipes to guide you through all the major applications of the MicroPython platform. Although no knowledge of MicroPython or microcontrollers is expected, a general understanding of Python is necessary to get started with this book.
The second edition of the best-selling Python for Kids—which brings you (and your parents) into the world of programming—has been completely updated to use the latest version of Python, along with tons of new projects! Python is a powerful programming language that’s easy to learn and fun to use! But books about programming in Python can be dull and that’s no fun for anyone. Python for Kids brings kids (and their parents) into the wonderful world of programming. Jason R. Briggs guides you through the basics, experimenting with unique (and hilarious) example programs featuring ravenous monsters, secret agents, thieving ravens, and more. New terms are defined; code is colored and explained; puzzles stretch the brain and strengthen understanding; and full-color illustrations keep you engaged throughout. By the end of the book, you’ll have programmed two games: a clone of the famous Pong, and “Mr. Stick Man Races for the Exit”—a platform game with jumps and animation. This second edition is revised and updated to reflect Python 3 programming practices. There are new puzzles to inspire you and two new appendices to guide you through Python’s built-in modules and troubleshooting your code. As you strike out on your programming adventure, you’ll learn how to: Use fundamental data structures like lists, tuples, and dictionaries Organize and reuse your code with functions and modules Use control structures like loops and conditional statements Draw shapes and patterns with Python’s turtle module Create games, animations, and other graphical wonders with tkinter Why should serious adults have all the fun? Python for Kids is your ticket into the amazing world of computer programming. Covers Python 3.x which runs on Windows, macOS, Linux, even Raspberry Pi
Explore MicroPython through a series of hands-on projects and learn to design and build your own embedded systems using the MicroPython Pyboard, ESP32, the STM32 IoT Discovery kit, and the OpenMV camera module. Key FeaturesDelve into MicroPython Kernel and learn to make modifications that will enhance your embedded applicationsDesign and implement drivers to interact with a variety of sensors and devicesBuild low-cost projects such as DIY automation and object detection with machine learningBook Description With the increasing complexity of embedded systems seen over the past few years, developers are looking for ways to manage them easily by solving problems without spending a lot of time on finding supported peripherals. MicroPython is an efficient and lean implementation of the Python 3 programming language, which is optimized to run on microcontrollers. MicroPython Projects will guide you in building and managing your embedded systems with ease. This book is a comprehensive project-based guide that will help you build a wide range of projects and give you the confidence to design complex projects spanning new areas of technology such as electronic applications, automation devices, and IoT applications. While building seven engaging projects, you'll learn how to enable devices to communicate with each other, access and control devices over a TCP/IP socket, and store and retrieve data. The complexity will increase progressively as you work on different projects, covering areas such as driver design, sensor interfacing, and MicroPython kernel customization. By the end of this MicroPython book, you'll be able to develop industry-standard embedded systems and keep up with the evolution of the Internet of Things. What you will learnDevelop embedded systems using MicroPythonBuild a custom debugging tool to visualize sensor data in real-timeDetect objects using machine learning and MicroPythonDiscover how to minimize project costs and reduce development timeGet to grips with gesture operations and parsing gesture dataLearn how to customize and deploy the MicroPython kernelExplore the techniques for scheduling application tasks and activitiesWho this book is for If you are an embedded developer or hobbyist looking to build interesting projects using MicroPython, this book is for you. A basic understanding of electronics and Python is required while some MicroPython experience will be helpful.
Program Your Own MicroPython projects with ease—no prior programming experience necessary! This DIY guide provides a practical introduction to microcontroller programming with MicroPython. Written by an experienced electronics hobbyist, Python for Microcontrollers: Getting Started with MicroPython features eight start-to-finish projects that clearly demonstrate each technique. You will learn how to use sensors, store data, control motors and other devices, and work with expansion boards. From there, you’ll discover how to design, build, and program all kinds of entertaining and practical projects of your own. • Learn MicroPython and object-oriented programming basics • Explore the powerful features of the Pyboard, ESP8266, and WiPy • Interface with a PC and load files, programs, and modules • Work with the LEDs, timers, and converters • Control external devices using serial interfaces and PWM • Build and program a let ball detector using the 3-axis accelerometer • Install and program LCD and touchsensor expansion boards • Record and play sounds using the AMP audio board
Games and activities that teach kids ages 10+ to code with Python Learning to code isn't as hard as it sounds—you just have to get started! Coding for Kids: Python starts kids off right with 50 fun, interactive activities that teach them the basics of the Python programming language. From learning the essential building blocks of programming to creating their very own games, kids will progress through unique lessons packed with helpful examples—and a little silliness! Kids will follow along by starting to code (and debug their code) step by step, seeing the results of their coding in real time. Activities at the end of each chapter help test their new knowledge by combining multiple concepts. For young programmers who really want to show off their creativity, there are extra tricky challenges to tackle after each chapter. All kids need to get started is a computer and this book. This beginner's guide to Python for kids includes: 50 Innovative exercises—Coding concepts come to life with game-based exercises for creating code blocks, drawing pictures using a prewritten module, and more. Easy-to-follow guidance—New coders will be supported by thorough instructions, sample code, and explanations of new programming terms. Engaging visual lessons—Colorful illustrations and screenshots for reference help capture kids' interest and keep lessons clear and simple. Encourage kids to think independently and have fun learning an amazing new skill with this coding book for kids.
The new edition of an introductory text that teaches students the art of computational problem solving, covering topics ranging from simple algorithms to information visualization. This book introduces students with little or no prior programming experience to the art of computational problem solving using Python and various Python libraries, including PyLab. It provides students with skills that will enable them to make productive use of computational techniques, including some of the tools and techniques of data science for using computation to model and interpret data. The book is based on an MIT course (which became the most popular course offered through MIT's OpenCourseWare) and was developed for use not only in a conventional classroom but in in a massive open online course (MOOC). This new edition has been updated for Python 3, reorganized to make it easier to use for courses that cover only a subset of the material, and offers additional material including five new chapters. Students are introduced to Python and the basics of programming in the context of such computational concepts and techniques as exhaustive enumeration, bisection search, and efficient approximation algorithms. Although it covers such traditional topics as computational complexity and simple algorithms, the book focuses on a wide range of topics not found in most introductory texts, including information visualization, simulations to model randomness, computational techniques to understand data, and statistical techniques that inform (and misinform) as well as two related but relatively advanced topics: optimization problems and dynamic programming. This edition offers expanded material on statistics and machine learning and new chapters on Frequentist and Bayesian statistics.
Quickly write innovative programs for your micro:bit—no experience necessary!This easy-to-follow guide shows, step-by-step, how to quickly get started with programming and creating fun applications on your micro:bit.. Written in the straightforward style that Dr. Simon Monk is famous for, Programming the BBC micro:bit: Getting Started with MicroPython begins with basic concepts and gradually progresses to more advanced techniques. You will discover how to use the micro:bit's built-in hardware, use the LED display, accept input from sensors, attach external electronics, and handle wireless communication.•Connect your micro:bit to a computer and start programming!•Learn how to use the two most popular MicroPython editors •Work with built-in functions and methods—and see how to write your own•Display text, images, and animations on the micro:bit’s LED matrix•Process data from the accelerometer, compass, and touch sensor•Control external hardware by attaching it to the edge connector•Send and receive messages via the built-in radio module•Graphically build programs with the JavaScript Blocks Editor