Download Free Portland Cement Concrete Overlays Book in PDF and EPUB Free Download. You can read online Portland Cement Concrete Overlays and write the review.

This report presents the latest information on the design, construction and performance of portland cement concrete (PCC) overlays. It describes the four types of PCC overlays that are commonly used in highway pavement applications: bonded PCC overlays, unbonded PCC overlays, conventional whitetopping and ultra-thin whitetopping. Recommended applications, critical design elements, current overlay design methodologies, recommended construction practices, and performance highlights are described for each overlay type. Information is also provided on the selection of PCC overlays as possible rehabilitation alternatives for existing pavements. Taken together, this document addresses the current "state of the technology" of PCC overlays placed on both existing PCC pavements and on existing hot-mix asphalt pavements.
The report describes the Virginia Department of Transportations' first modern experience with the construction of thin-bonded Portland cement concrete overlays of existing concrete pavements and with the fast track mode of rigid paving. The study was conducted in cooperation with the Federal Highway Administration (FHWA) and used a paving mixture verified in an FHWA mobile laboratory. The study showed that the fast track mode will permit lane closure times as short as 48 hours. Of special interest was the finding that adequate strength of the bond between the old pavement and the overlay is not dependent on the use of a bonding grout.
The Iowa ultra-thin project demonstrated the application of thin portland cement concrete overlays as a rehabilitation technique. It combined the variables of base preparation, overlay thickness, slab size, and fiber enhancement into a series of test sections over a 7.2-mile length. This report identifies the performance of the overlays in terms of deflection reduction, reduced cracking, and improved bonding between the portland cement concrete (PCC) and asphalt cement concrete (ACC) base layers. The original research project was designed to evaluate the variables over a 5-year period of time. A second project provided the opportunity to test overlay rehabilitation techniques and continue measurement of the original overlay performance for 5 additional years.
This synthesis report will be of special interest to pavement designers, materials engineers, and others seeking information on portland cement concrete resurfacings (overlays) placed over both portland and asphalt cement concrete pavements. Information is presented on the various practices in use for the design, material selection, and construction techniques associated with each pavement type. Additional information is provided on resurfacing experience and performance, including an Appendix cataloging more than 700 existing resurfacing projects in North America. Transportation agencies in the United States are continuing to develop pavement management systems which take an objective and structured approach to life-cycle cost analysis requirements for pavement rehabilitation project analysis. This report of the Transportation Research Board also discusses the considerations involved in the selection of technically feasible resurfacing alternatives. Based on the longitudinal experience of 375 resurfacing projects that were cataloged in 1982 and the more than 700 projects identified in 1993, much useful information on the performance characteristics of portland cement concrete resurfacing is presented.