Download Free Pile Foundation Design Book in PDF and EPUB Free Download. You can read online Pile Foundation Design and write the review.

The "Red Book" presents a background to conventional foundation analysis and design. The text is not intended to replace the much more comprehensive 'standard' textbooks, but rather to support and augment these in a few important areas, supplying methods applicable to practical cases handled daily by practising engineers and providing the basic soil mechanics background to those methods. It concentrates on the static design for stationary foundation conditions. Although the topic is far from exhaustively treated, it does intend to present most of the basic material needed for a practising engineer involved in routine geotechnical design, as well as provide the tools for an engineering student to approach and solve common geotechnical design problems.
This Standard provides a guideline for an engineering approach to the design and subsequent installation of pile foundations. The purpose is to furnish a rational basis for this process, taking into account published model building codes and general standards of practice. It covers such topics as: administrative requirements; pile shaft strength requirements; soil-pile interface strength requirements and capacity; design loads; design stresses; construction and layout guidelines for pile design; and installation guidelines for pile construction. In addition, the Standard includes information on applicable standards from ASTM, AWPA, and ACI. It concludes with an Appendix on partial factors of safety.
Pile foundations are the most common form of deep foundations that are used both onshore and offshore to transfer large superstructural loads into competent soil strata. This book provides many case histories of failure of pile foundations due to earthquake loading and soil liquefaction. Based on the observed case histories, the possible mechanisms of failure of the pile foundations are postulated. The book also deals with the additional loading attracted by piles in liquefiable soils due to lateral spreading of sloping ground. Recent research at Cambridge forms the backbone of this book with the design methodologies being developed directly based on quantified centrifuge test results and numerical analysis. The book provides designers and practicing civil engineers with a sound knowledge of pile behaviour in liquefiable soils and easy-to-use methods to design pile foundations in seismic regions. For graduate students and researchers, it brings together the latest research findings on pile foundations in a way that is relevant to geotechnical practice. Sample Chapter(s). Foreword (85 KB). Chapter 1: Performance of Pile Foundations (4,832 KB). Contents: Performance of Pile Foundations; Inertial and Kinematic Loading; Accounting for Axial Loading in Level Ground; Lateral Spreading of Sloping Ground; Axial Loading on Piles in Laterally Spreading Ground; Design Examples. Readership: Researchers, academics, designers and graduate students in earthquake engineering, civil engineering and ocean/coastal engineering.
This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile groups under compressive loading, piled foundations for resisting uplift and lateral loading and the structural design of piles and pile groups. Marine structures, miscellaneous problems (including machinery foundations, underpinning, mining subsidence areas, contracts and frozen ground), durability of piled foundations, ground investigations, and pile testing are also covered. It introduces the 2005 version of Eurocode7, BS 8004 and other codes, and refers to BS 6349 on maritime structures, and new forms of civil engineering contracts suitable for piling projects. It includes numerous worked examples to the codes, many based on actual problems. It also gives very comprehensive information for students.
This is a concise, systematic and complete treatment of the design and construction of pile foundations. Discusses pile behavior under various loadings and types of piles and their installation, including consideration of soil parameters. It provides step-by-step design procedures for piles subject to vertical loading and pullout, lateral, inclined and eccentric loads, or dynamic loads, and for piles in permafrost. Also describes load test procedures and their interpretation and buckling of long, slender piles with and without supported length. The closing chapter presents case histories of prediction and performance of piles and pile groups. Includes numerous solved problems.
Pile Design and Construction Rules of Thumb presents Geotechnical and Civil Engineers a comprehensive coverage of Pile Foundation related theory and practice. Based on the author's experience as a PE, the book brings concise theory and extensive calculations, examples and case studies that can be easily applied by professional in their day-to-day challenges. In its first part, the book covers the fundamentals of Pile Selection: Soil investigation, condition, pile types and how to choose them. In the second part it addresses the Design of Pile Foundations, including different types of soils, pile groups, pile settlement and pile design in rock. Next, the most extensive part covers Design Strategies and contains chapters on loading analysis, load distribution, negative skin friction, design for expansive soils, wave equation analysis, batter piles, seismic analysis and the use of softwares for design aid. The fourth part covers Construction Methods including hammers, Inspection, cost estimation, load tests, offshore piling, beams and caps. In this new and updated edition the author has incorporated new pile designs such as helical, composite, wind turbine monopiles, and spiral coil energy piles. All calculations have been updated to most current materials characteristics and designs available in the market. Also, new chapters on negative skin friction, pile driving, and pile load testing have been added. Practicing Geotechnical, and Civil Engineers will find in this book an excellent handbook for frequent consult, benefiting from the clear and direct calculations, examples, and cases. Civil Engineering preparing for PE exams may benefit from the extensive coverage of the subject. - Convenient for day-to-day consults - Numerous design examples for sandy soils, clay soils, and seismic loadings - Now including helical, composite, wind turbine monopiles, and spiral coil energy piles - Methodologies and case studies for different pile types - Serves as PE exam preparation material
Contributions feature the use of in-situ tests in design; recent studies on the full-scale field behavior of pile groups and installation of driven piles; and the design and construction of drilled shaft foundations in hard soils and soft rock.
This book presents computational tools and design principles for piles used in a wide range of applications and for different loading conditions. The chapters provide a mixture of basic engineering solutions and latest research findings in a balanced manner. The chapters are written by world-renowned experts in the field. The materials are presented in a unified manner based on both simplified and rigorous numerical methods. The first four chapters present the basic elements and steps in analysis of piles under static and cyclic loading together with clear references to the appropriate design regulations in Eurocode 7 when relevant. The analysis techniques cover conventional code-based methods, solutions based on pile-soil interaction springs, and advanced 3D finite element methods. The applications range from conventional piles to large circular steel piles used as anchors or monopiles in offshore applications. Chapters 5 to 10 are devoted to dynamic and earthquake analyses and design. These chapters cover a range of solutions from dynamic pile-soil springs to elasto-dynamic solutions of large pile groups. Both linear and nonlinear soil behaviours are considered along with response due to dynamic loads and earthquake shaking including possible liquefaction. The book is unique in its unified treatment of the solutions used for static and dynamic analysis of piles with practical examples of application. The book is considered a valuable tool for practicing engineers, graduate students and researchers.