Download Free Numerical And Experimental Study Of The Influence Of Frost Formation And Defrosting On The Performance Of Industrial Evaporator Coils Book in PDF and EPUB Free Download. You can read online Numerical And Experimental Study Of The Influence Of Frost Formation And Defrosting On The Performance Of Industrial Evaporator Coils and write the review.

The heat transfer and analysis on laser beam, evaporator coils, shell-and-tube condenser, two phase flow, nanofluids, complex fluids, and on phase change are significant issues in a design of wide range of industrial processes and devices. This book includes 25 advanced and revised contributions, and it covers mainly (1) numerical modeling of heat transfer, (2) two phase flow, (3) nanofluids, and (4) phase change. The first section introduces numerical modeling of heat transfer on particles in binary gas-solid fluidization bed, solidification phenomena, thermal approaches to laser damage, and temperature and velocity distribution. The second section covers density wave instability phenomena, gas and spray-water quenching, spray cooling, wettability effect, liquid film thickness, and thermosyphon loop. The third section includes nanofluids for heat transfer, nanofluids in minichannels, potential and engineering strategies on nanofluids, and heat transfer at nanoscale. The forth section presents time-dependent melting and deformation processes of phase change material (PCM), thermal energy storage tanks using PCM, phase change in deep CO2 injector, and thermal storage device of solar hot water system. The advanced idea and information described here will be fruitful for the readers to find a sustainable solution in an industrialized society.
Defrosting for Air Source Heat Pumps: Research, Analysis and Methods presents a detailed analysis of the methods, processes and problems relating to defrosting, a necessary requirement to maintain the performance of ASHP units. Readers will gain a deeper understanding of control strategies and system design optimization methods that improve the performance and reliability of units. The book discusses the most recent experimental and numerical studies of reverse cycle defrosting and the most widely used defrosting method for ASHP. Techno-economic considerations are also presented, as is the outlook for the future. This book is a valuable resource for research students and academics of thermal energy and mechanical engineering, especially those focusing on defrosting for ASHP, heating, ventilation and energy efficiency, as well as engineers and professionals engaged in the development and management of heat pump machinery. Includes MATLAB codes that allow the reader to implement the knowledge they have acquired in their own simulations and projects Discusses experimental and numerical studies to provide a well-rounded analysis of technologies, methods and available systems Presents techno-economic considerations and a look to the future
This Brief is aimed at engineers and researchers involved in the refrigeration industry: specifically, those interested in energy utilization and system efficiency. The book presents what the authors believe is the first comprehensive frost melting study involving all aspects of heat and mass transfer. The volume’s description of in-plane and normal digital images of frost growth and melting is also unique in the field, and the digital analysis technique offers an advantage over invasive measurement methods. The scope of book’s coverage includes modeling and experimentation for the frost formation and melting processes. The key sub-specialties to which the book are aimed include refrigeration system analysis and design, coupled heat and mass transfer, and phase-change processes.
A good estimation of the fin surface temperature was achieved with the methodology developed in the present study. Experimental data of frost weight, local frost thickness, air pressure drop across the coils, time of frost-defrost cycles and heat transfer rates were recorded for heat exchangers operating in actual transient frosting conditions. Data showed that the frosting time and the frost growth rates depend mainly on the local fin surface temperature while water retention and surface coatings could have secondary and minor effects. Some geometries performed better in frosting condition than others such as geometries with lower fin density that delayed the blockage of the air flow. The fin length and fin depth had minor effects on frosting performance. It was found that air humidity has a significant effect on rate of frost formation while air velocity seemed to have a small effect on frost formation.