Download Free Natural Stone Resources For Historical Monuments Book in PDF and EPUB Free Download. You can read online Natural Stone Resources For Historical Monuments and write the review.

Natural stone is considered to be a versatile, durable and aesthetically pleasing building material. From the beginning of civilization, important structures and monuments have been built from, or based on, natural stone. Until the end of the nineteenth century, the use of local stone re-sources was mostly in balance with the local environment. Strict environ-mental legislation has resulted in the closing of many long-standing quar-ries in industrialized countries, which has led to a shortage of traditional stone varieties. This has caused problems for restoration practice. Cheap, imported stone from less industrialized countries has become more widely available in recent years. Some of the issues related to built stone conservation and restoration cov-ered by this volume are: the establishment of inventories of possible re-placement stones; understanding the decay mechanism and use of preven-tive conservation methods for slowing down decay processes; evaluation of the properties of natural stone; and assessing the risks of using replacement stones of different qualities.
One distinct feature of human society since the dawn of civilization is the systematic use of inorganic building materials, such as natural stone, unburnt and burnt soil, adobe and brick, inorganic binders like lime and cement, and reinforced concrete. Our heritage has cultural, architectural and technological value and preserving such structures is a key issue today. Planners and conservation scientists need detailed site surveys and analyses to create a database that will serve to guide subsequent actions. One factor in this knowledge base is an understanding of how historic materials were prepared and the crucial properties that influence their long-term behaviour. Any assessment of the way such materials perform must crucially be based on an understanding of the methods used for their analysis. The editors here add to the knowledge base treating the materials used in historic structures, their properties, technology of use and conservation, and their performance in a changing environment. The book draws together 18 chapters dealing with the inorganic materials used in historic structures, such as adobe, brick, stone, mortars, concrete and plasters. The approach is complex, covering material characterisation as well as several case studies of historic structures from Europe, including Germany, Ireland, Italy, Poland, Portugal, Scotland, Slovenia and Spain, and the My Sõn Temples in Vietnam. An equally important component of the book covers the analysis of materials, together with a treatment of sustainable development, such as the protection of monuments from earthquakes and climate change. The authors are all leading international experts, drawn from a variety of backgrounds: architecture, civil engineering, conservation science, geology and material science, with close links to professional organisations such as ICOMOS or universities and research centres throughout Europe. Audience: This book will be of interest to geologists, engineers, restorers, consulting engineers, designers and other professionals dealing with cultural heritage and sustainable development. Also graduate students in applied geo-science (mineralogy, geochemistry, petrology), architecture and civil engineering will find interesting information in this book.
There is considerable academic and practical interest in stone and stone buildings, as exemplified by the wide range of high-quality and innovative work being conducted in the pursuit of the effective preservation and restoration of historic buildings. This is reflected in the numerous publications on stone and stone buildings that regularly find their way into the public domain. Not least amongst these are a number of Geological Society Special Publications, which have appeared in recent years. This current volume seeks to bring to the attention of the various professionals in the field (geologists, architects, engineers, conservators and conservation scientists) recent work centred on the characterization and performance of this important resource and its use in historic buildings. The volume has wider relevance, including to those interested in the heritage of stone.
This book is made up of contributions dealing with heritage stones from different countries around the world. The stones are described, as well as their use in vernacular and contemporaneous architecture. Heritage stones are those stones that have special significance in human culture. Examples include some very important stones that have been either neglected because they are no longer extracted, or stones that have great significance in commercial terms but knowledge of their national and/or international heritage has not been well documented. In this collection of articles, we have tried to spread awareness of architectural heritage around the world, the natural stones that have been used in its construction, and the need to preserve historical quarries that once provided the source of such stones. Historical quarries are linked to regional culture and tradition. Because of the specific technical and aesthetical characteristics of heritage stones, which have lasted for centuries, these historical quarries should be preserved to be able to use the stones for the proper restoration of monuments and historical buildings to avoid negative actions that can be observed in many places in the restoration of buildings, which are some times part of World Heritage sites. The final intention of this book is to continuosly grow the interest on this fascinating subject of heritage stones.
Geomaterials derived from the Earth’s crust and used in construction after appropriate processing are among the earliest raw materials exploited, processed and used by humans. Their numerous functional properties include accessibility, workability and serviceability, and these are explored within this volume. In modern society, sustainable use of raw materials, specifically those exploited in large volumes such as geomaterials for construction, raises questions of reducing extraction of primary resources and thus minimizing impacts on natural systems, and also employment of materials and technologies to lower emissions of deleterious substances into the atmosphere. This will be possible only if we fully understand the properties, processing and mode of use of traditional geomaterials. Although most of the papers within this volume were written by geologists, the contributions will also be of interest to those working in cultural heritage, monument conservation, civil engineering and architecture.
This Special Publication is dedicated to heritage stone: those natural stones that have special significance in human culture. Some stones that have had important uses in the past are now neglected because they are no longer extracted. Others are still commercially important, but their heritage uses have not been well documented in widely available sources. The Heritage Stone Task Group of the International Union of Geological Sciences is working to establish a new formal designation of ‘Global Heritage Stone Resource’ to recognize those stones that have had internationally significant architectural and ornamental uses. The aim is to spread awareness of the cultural heritage aspects of these stones, to help to encourage continued supply for maintenance and repair of important monuments and to preserve historically important quarries. The aim is neither to promote nor to limit these stones for new construction: in some cases continuing commercial use might help to ensure future supplies for building conservation purposes.
This book is one out of 8 IAEG XII Congress volumes, and deals with the theme of urban geology. Along with a rapidly growing world population, the wave of urban growth continues, causing cities to swell and new metropolitan centers to emerge. These global trends also open new ventures for underground city development. Engineering geology plays a major role in facing the increasing issues of the urban environment, such as: finding aggregates for construction works; providing adequate water supply and waste management; solving building problems associated to geological and geomorphological conditions; evaluating host rock conditions for underground constructions; preventing or mitigating geological and seismic hazards. Furthermore, this book illustrates recent advancements in sustainable land use planning, which includes conservation, protection, reclamation and landscape impact of open pit mining and alternative power generation. The Engineering Geology for Society and Territory volumes of the IAEG XII Congress held in Torino from September 15-19, 2014, analyze the dynamic role of engineering geology in our changing world and build on the four main themes of the congress: environment, processes, issues and approaches. The congress topics and subject areas of the 8 IAEG XII Congress volumes are: 1. Climate Change and Engineering Geology 2. Landslide Processes River Basins 3. Reservoir Sedimentation and Water Resources 4. Marine and Coastal Processes Urban Geology 5. Sustainable Planning and Landscape Exploitation 6. Applied Geology for Major Engineering Projects 7. Education, Professional Ethics and Public Recognition of Engineering Geology 8. Preservation of Cultural Heritage
Heritage stones are building and ornamental stones that have special significance in human culture. The papers in this volume discuss a wide variety of such materials, including stones from Europe, Asia, North and South America, Africa and Australia. Igneous (basalt, porphyry, granite), sedimentary (sandstone, limestone) and metamorphic (marble, quartzite, gneiss, soapstone, slate) stones are featured. These have been utilized over long periods of time for a wide range of uses contributing to the historic fabric of the built environment. Many of these stones are of international significance, and so are potential Global Heritage Stone Resources, that is stones that have the requisite qualities for international recognition by the Heritage Stones Subcommission of the International Union of Geological Sciences. The papers bring together diverse information on these stones ranging from their geological setting and quarry locations to mechanical properties, current availability, and uses over time. As such the papers can serve as an entry into the literature on these important stones.
This book is the first to describe the history of geoconservation. It draws on experience from the UK, Europe and further afield, to explore topics including: what is geoconservation; where, when and how did it start; who was responsible; and how has it differed across the world? Geological and geomorphological features, processes, sites and specimens, provide a resource of immense scientific and educational importance. They also form the foundation for the varied and spectacular landscapes that help define national and local identity as well as many of the great tourism destinations. Mankind's activities, including contributing to enhanced climate change, pose many threats to this resource: the importance of safeguarding and managing it for future generations is now widely accepted as part of sustainable development. Geoconservation is an established and growing activity across the world, with more participants and a greater profile than ever before. This volume highlights a history of challenges, set-backs, successes and visionary individuals and provides a sound basis for taking geoconservation into the future.
This volume focuses on research and practical issues connected with mortars on historic structures. The book is divided into four sections: Characterisation of Historic Mortars, Repair Mortars and Design Issues, Experimental Research into Properties of Repair Mortars, and Assessment and Testing. The papers present the latest work of researchers in their field. The individual contributions were selected from the contributions to the 2nd Historic Mortars Conference, which took place in Prague, September, 22-24, 2010. All papers were reviewed and improved as necessary before publication. This peer review process by the editors resulted in the 34 individual contributions included in here. One extra paper reviewing and summarising State-of-the-Art knowledge covered by this publication was added as a starting and navigational point for the reader. The editors believe that having these papers in print is important and they hope that it will stimulate further research into historic mortars and related subjects.