Download Free Natural Rubber Science And Technology Book in PDF and EPUB Free Download. You can read online Natural Rubber Science And Technology and write the review.

The Science and Technology of Rubber, Third Edition provides a broad survey of elastomers with special emphasis on materials with a rubber-like elasticity. As in the 2nd edition, the emphasis remains on a unified treatment of the material; exploring topics from the chemical aspects such as elastomer synthesis and curing, through recent theoretical developments and characterization of equilibrium and dynamic properties, to the final applications of rubber, including tire engineering and manufacturing. Many advances have been made in polymer and elastomers research over the past ten years since the 2nd edition was published. Updated material stresses the continuous relationship between the ongoing research in synthesis, physics, structure and mechanics of rubber technology and industrial applications. Special attention is paid to recent advances in rubber-like elasticity theory and new processing techniques for elastomers. This new edition is comprised of 20% new material, including a new chapter on environmental issues and tire recycling.
A summary of the current position in the study of rubber, its fundamental properties and the uses to which it is put, from everyday to extraordinary applications, with pointers to the future.
Natural Rubber (NR) is a renewable polymer endowed with remarkable properties including its high elasticity and high film forming capacity, properties that enable its use in a wide range of applications. In this book, Chapter One reviews properties, behavior and uses of NR. Chapter Two discusses NR properties and conventional applications, as well the development of new thermo-reversible cross linked NR. Chapter Three evaluates samples of natural rubber latex using a coaxial cylinder rheometer and, as from the data obtained, propose a model to determine the flow energy at different total solids contents. Chapter Four provides a review of the past, present and future perspectives of the vulcanization of natural rubber. Chapter Five investigates the effect of increasing MMT loading levels on the physico-mechanical properties of EVA/ devulcanized rubber (DVC rubber) blends. Chapter Six discusses in detail the parameters and conditions that could influence the degradation reaction of NR latex in the presence of hydrogen peroxide and UV light. Chapter Seven focuses specifically on the use of metal and metal oxide particles in NR, epoxidized natural rubber (ENR) and their respective blends reported between 2010 to 2015.
About ten years after the publication of the Second Edition (1973), it became apparent that it was time for an up-date of this book. This was especially true in this case, since the subject matter has traditionally dealt mainly with the structure, properties, and technology of the various elastomers used in industry, and these are bound to undergo significant changes over the period of a decade. In revising the contents of this volume, it was thought best to keep the orig inal format. Hence the first five chapters discuss the same general subject matter as before. The chapters dealing with natural rubber and the synthetic elastomers are up-dated, and an entirely new chapter has been added on the thermoplastic elastomers, which have, of course, grown tremendously in importance. Another innovation is the addition of a new chapter, "Miscellaneous Elastomers," to take care of "old" elastomers, e.g., polysulfides, which have decreased some what in importance, as well as to introduce some of the newly-developed syn thetic rubbers which have not yet reached high production levels. The editor wishes to express his sincere appreciation to all the contributors, without whose close cooperation this task would have been impossible. He would especially like to acknowledge the invaluable assistance of Dr. Howard Stephens in the planning of this book, and for his suggestion of suitable authors.
Chemistry, Manufacture and Applications of Natural Rubber, Second Edition presents the latest advances in the processing, properties and advanced applications of natural rubber (NR), drawing on state-of-the-art research in the field. Chapters cover manufacturing, processing and properties of natural rubber, describing biosynthesis, vulcanization for improved performance, strain-induced crystallization, self-reinforcement, rheology and mechanochemistry for processing, computer simulation of properties, scattering techniques and stabilizing agents. Applications covered include natural rubber, carbon allotropes, eco-friendly soft bio-composites using NR matrices and marine products, the use of NR for high functionality such as shape memory, NR for the tire industry, and natural rubber latex with advanced applications. This is an essential resource for academic researchers, scientists and (post)graduate students in rubber science, polymer science, materials science and engineering, and chemistry. In industry, this book enables professionals, R&D, and producers across the natural rubber, tire, rubber and elastomer industries, as well as across industries looking to use natural rubber products, to understand and utilize natural rubber for cutting-edge applications. - Explains the latest manufacture and processing techniques for natural rubber (NR) with enhanced properties - Explores novel applications of natural rubber across a range of industries, including current and potential uses - Discusses resources and utilization, and considers sustainable future development of natural rubber
No other book on natural rubber covers such a broad spectrum of subjects as this unique publication. Subjects related to the biology, cultivation and technology of natural rubber are dealt with, along with such important aspects as its history, production and processing, through to its sophisticated engineering applications. Every chapter follows a monograph style of presentation, with comprehensive citations and depth of treatment. Contributions from highly experienced, and still active, renowned scientists reflect the truly international effort to the development of this commodity. In addition to the wealth of information presented, most of the chapters contain elaborate lists of earlier contributions in the respective fields; one chapter each has been included on rubber wood, ancillary products and guayule.
This volume, the fourth in a series which began in 1979, covers a greater variety of subjects than any previous single volume. The basis of selection has been topical interest; hence the tailor-making of polymers to develop specific properties, methods of improving com pound processability and the use of rubbers in the oil industry are featured alongside a discussion of safety aspects. We have again sought the cooperation of the foremost authorities on the chosen subjects and have been delighted at the response which has yielded a list of authors of international repute. A. w. K. S. L. CONTENTS Preface v List of Contributors ix 1. Recent Developments in Synthetic Rubbers by Anionic Polymerization 1 I. G. HARGIS, R. A. LIVIGNI and S. L. AGGARWAL 2. Advances in Nitrile Rubber (NBR) 57 P. W. MILNER 3. Epoxidized Natural Rubber. 87 C. S. L. BAKER and I. R. GELLING 4. Process Aids and Plasticizers . 119 B. G. CROWTHER 5. A Review of Elastomers Used for Oilfield Sealing Environments . 159 W. N. K. REVOLTA and G. C. SWEET 6. Using Modern Mill Room Equipment . 193 H. ELLWOOD 7. Quality Requirements and Rubber Mixing . 221 P. S. JOHNSON 8. Health and Safety . . 253 B. G. WILLOUGHBY Index . 307 vii LIST OF CONTRIBUTORS s. L. AGGARWAL Gen Corp , Research Division, 2990 Gilchrist Road, Akron, Ohio 44305, USA C. S. L. BAKER Malaysian Rubber Producers' Research Association, Tun Abdul Razak Laboratory, Brickendonbury, Hertford SG13 8NL, UK B. G.
The combination of its unique morphology, physical properties, cost effectiveness and environmental friendliness make natural rubber an appealing constituent for many materials and applications. This comprehensive two volume set covers the synthesis, characterization and applications of natural rubber based blends, interpenetrating polymer networks, composites and nanocomposites. Volume 1 covers different types of natural rubber-based blends and IPNs as well as manufacturing methods, thermo mechanical characterization techniques, life cycle analysis and their applications. Volume 2 focuses on natural rubber-based composites and Nanocomposites including the different types of fillers, the filler-matrix reinforcement mechanisms, manufacturing techniques, and applications. This is the first book to consolidate the current state of the art information on natural rubber based materials with contributions from established international experts in the field. The book provides a "one stop" reference resource for professionals, researchers, industrial practitioners, graduate students, and senior undergraduates in the fields of polymer science and engineering, materials science, surface science, bioengineering and chemical engineering.
This book has its origin in a proposal made a few years ago that I should collaborate with Dr H. J. Stern in the production of a third edition of his well-known text-book entitled Rubber: Natural and Synthetic. The sugges tion was that I should contribute a series of chapters on synthetic rubbers. Although, in the event, it has not proved possible to publish the full book in the form originally planned, it was apparent that, with some restructuring, the material which I had collected would be valuable as an independent summary of the chemistry and technology of synthetic rubbers. It is in this form that the material is now offered. The primary purpose of this book is to provide a brief up-to-date survey of the principal types of synthetic rubber which have been and are currently available. Two classes of material are included which are regarded by some as being thermoplastics rather than rubbers, namely, plasticised polyvinyl chloride and the thermoplastic synthetic rubbers. The topics which are covered for each main family of synthetic rubbers are (i) the sources of the monomers, (ii) polymerisation procedures and the effects of important polymerisation variables upon the rubber produced, (iii) the types of rubber currently available commercially, (iv) interesting aspects of the compounding of the rubbers, with special reference to such matters as vulcanisation, reinforcement, protection against degradation, and (where appropriate) plasticisation, and (v) an indication of applications.