Download Free Modeling Drying Processes Book in PDF and EPUB Free Download. You can read online Modeling Drying Processes and write the review.

This comprehensive summary of the state of the art and the ideas behind the reaction engineering approach (REA) to drying processes is an ideal resource for researchers, academics and industry practitioners. Starting with the formulation, modelling and applications of the lumped-REA, it goes on to detail the use of the REA to describe local evaporation and condensation, and its coupling with equations of conservation of heat and mass transfer, called the spatial-REA, to model non-equilibrium multiphase drying. Finally, it summarises other established drying models, discussing their features, limitations and comparisons with the REA. Application examples featured throughout help fine-tune the models and implement them for process design and the evaluation of existing drying processes and product quality during drying. Further uses of the principles of REA are demonstrated, including computational fluid dynamics-based modelling, and further expanded to model other simultaneous heat and mass transfer processes.
This book is interdisciplinary in character and combines the knowledge of me chanics and chemical engineering with the aim of presenting a more exhaustive analysis ofthe phenomena occurring in wet materials during drying. Traditionally, the subject of drying has been an almost exclusive domain of chemical engineers. The drying curricula have mostly included only the courses of heat and mass transfer or diffusion. The mechanical phenomena that accompany drying, as for example, warping or deformation of dried materials, or the drying induced stresses and fissures of the material, were ignored or considered in a rather obscure way. This book broadens the scope of drying theory, bringing into the curriculum the tools enabling the study of both heat and mass transport processes and the me chanical phenomena that occur in wet materials under drying. There is little available literature that brings together heat and mass transport processes and mechanical phenomena in a unified approach to drying processes.
Most conventional dryers use random heating to dry diverse materials without considering their thermal sensitivity and energy requirements for drying. Eventually, excess energy consumption is necessary to attain a low-quality dried product. Proper heat and mass transfer modelling prior to designing a drying system for selected food materials can overcome these problems. Heat and Mass Transfer Modelling During Drying: Empirical to Multiscale Approaches extensively discusses the issue of predicting energy consumption in terms of heat and mass transfer simulation. A comprehensive mathematical model can help provide proper insight into the underlying transport phenomena within the materials during drying. However, drying of porous materials such as food is one of the most complex problems in the engineering field that is also multiscale in nature. From the modelling perspective, heat and mass transfer phenomena can be predicted using empirical to multiscale modelling. However, multiscale simulation methods can provide a comprehensive understanding of the physics of drying food materials. KEY FEATURES Includes a detailed discussion on material properties that are relevant for drying phenomena Presents an in-depth discussion on the underlying physics of drying using conceptual visual content Provides appropriate formulation of mathematical modelling from empirical to multiscale approaches Offers numerical solution approaches to mathematical models Presents possible challenges of different modelling strategies and potential solutions The objective of this book is to discuss the implementation of different modelling techniques ranging from empirical to multiscale in order to understand heat and mass transfer phenomena that take place during drying of porous materials including foods, pharmaceutical products, paper, leather materials, and more.
Drying of Polymeric and Solid Materials shows for the first time how the process of drying can be enhanced by combining mathematical and numerical models with experiments. The main advantages of this method are a significant saving of time and money. Numerical modelling can predict the kinetics of drying and the profiles of liquid concentration through the solid. This helps in the selection of optimal operational conditions. The simulation of the process is also crucial in the assessment of diffusity and the rate of evaporation.
International contributors give wide coverage of the latest developments in the theory and practice of the drying of solids. Drying is one of the most common and energy-intensive operations in industry, and the cost is determined by the desired level of product moisture and the unit operation of nonthermal dewatering--hence the commissioned article on a new dewatering technique. Articles are balanced between theory and applications and practicing engineers should find a wealth of useful information. Topics covered include drying theory and modelling, drying of granular solids, drying of sheets, drying of foodstuffs, drying of agricultural products, solar drying, and drying of slurries.
A comprehensive summary of the state of the art in the reaction engineering approach to drying processes, including modelling, experimentation and applications.
Computational modeling is an important tool for understanding and improving food processing and manufacturing. It is used for many different purposes, including process design and process optimization. However, modeling goes beyond the process and can include applications to understand and optimize food storage and the food supply chain, and to perform a life cycle analysis. Modeling Food Processing Operations provides a comprehensive overview of the various applications of modeling in conventional food processing. The needs of industry, current practices, and state-of-the-art technologies are examined, and case studies are provided. Part One provides an introduction to the topic, with a particular focus on modeling and simulation strategies in food processing operations. Part Two reviews the modeling of various food processes involving heating and cooling. These processes include: thermal inactivation; sterilization and pasteurization; drying; baking; frying; and chilled and frozen food processing, storage and display. Part Three examines the modeling of multiphase unit operations such as membrane separation, extrusion processes and food digestion, and reviews models used to optimize food distribution. - Comprehensively reviews the various applications of modeling in conventional food processing - Examines the modeling of multiphase unit operations and various food processes involving heating and cooling - Analyzes the models used to optimize food distribution
This five-volume handbook provides a comprehensive overview of all important aspects of modern drying technology, including only advanced results. In this first volume diverse model types for the drying of products and the design of drying processes (short-cut methods, homogenized, pore network, and continuous thermo-mechanical approaches) are treated, along with computational fluid dynamics, population balances, and process systems simulation tools. Emphasis is put on scale transitions.
This book offers a comprehensive reference guide to the latest developments and advances in solar drying technology, covering the concept, design, testing, modeling, and economics of solar drying technologies, as well as their impact on the environment. The respective chapters are based on the latest studies conducted by reputed international researchers in the fields of solar energy and solar drying. Offering a perfect blend of research and practice explained in a simple manner, the book represents a valuable resource for researchers, students, professionals, and policymakers working in the field of solar drying and related agricultural applications.
Despite the development of advanced methods, models, and algorithms, optimization within structural engineering remains a primary method for overcoming potential structural failures. With the overarching goal to improve capacity, limit structural damage, and assess the structural dynamic response, further improvements to these methods must be entertained. Optimization of Design for Better Structural Capacity is an essential reference source that discusses the advancement and augmentation of optimization designs for better behavior of structure under different types of loads, as well as the use of these advanced designs in combination with other methods in civil engineering. Featuring research on topics such as industrial software, geotechnical engineering, and systems optimization, this book is ideally designed for architects, professionals, researchers, engineers, and academicians seeking coverage on advanced designs for use in civil engineering environments.