Download Free Model Driven Design Using Iec 61499 Book in PDF and EPUB Free Download. You can read online Model Driven Design Using Iec 61499 and write the review.

This book describes a novel approach for the design of embedded systems and industrial automation systems, using a unified model-driven approach that is applicable in both domains. The authors illustrate their methodology, using the IEC 61499 standard as the main vehicle for specification, verification, static timing analysis and automated code synthesis. The well-known synchronous approach is used as the main vehicle for defining an unambiguous semantics that ensures determinism and deadlock freedom. The proposed approach also ensures very efficient implementations either on small-scale embedded devices or on industry-scale programmable automation controllers (PACs). It can be used for both centralized and distributed implementations. Significantly, the proposed approach can be used without the need for any run-time support. This approach, for the first time, blurs the gap between embedded systems and automation systems and can be applied in wide-ranging applications in automotive, robotics, and industrial control systems. Several realistic examples are used to demonstrate for readers how the methodology can enable them to reduce the time-to-market, while improving the design quality and productivity.
This book provides a concise introduction to the main concepts and models defined in the standard for modelling distributed control systems for use in factory automation.
The IEC 61499 standard was developed to model distributed control systems. This book introduces the main concepts and models defined in the IEC 61499 standard, particularly the use of function blocks, covering service interface function blocks, event function blocks, industrial application examples, and future development. The book is written as a user guide for the application of the standard for modeling distributed systems, and will useful for those working in industrial control, software engineering, and manufacturing systems. Lewis is the UK expert on two IEC working groups. Annotation copyrighted by Book News Inc., Portland, OR.
Distributed Control Applications: Guidelines, Design Patterns, and Application Examples with the IEC 61499 discusses the IEC 61499 reference architecture for distributed and reconfigurable control and its adoption by industry. The book provides design patterns, application guidelines, and rules for designing distributed control applications based on the IEC 61499 reference model. Moreover, examples from various industrial domains and laboratory environments are introduced and explored.
Distributed Control Applications: Guidelines, Design Patterns, and Application Examples with the IEC 61499 discusses the IEC 61499 reference architecture for distributed and reconfigurable control and its adoption by industry. The book provides design patterns, application guidelines, and rules for designing distributed control applications based on the IEC 61499 reference model. Moreover, examples from various industrial domains and laboratory environments are introduced and explored.
The conference proceedings of: International Conference on Industrial Electronics, Technology & Automation (IETA 05) International Conference on Telecommunications and Networking (TeNe 05) International Conference on Engineering Education, Instructional Technology, Assessment, and E-learning (EIAE 05) include a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the areas of: Industrial Electronics, Technology and Automation, Telecommunications, Networking, Engineering Education, Instructional Technology and e-Learning. The three conferences, (IETA 05, TENE 05 and EIAE 05) were part of the International Joint Conference on Computer, Information, and System Sciences, and Engineering (CISSE 2005). CISSE 2005, the World's first Engineering/Computing and Systems Research E-Conference was the first high-caliber Research Conference in the world to be completely conducted online in real-time via the internet. CISSE received 255 research paper submissions and the final program included 140 accepted papers, from more than 45 countries. The whole concept and format of CISSE 2005 was very exciting and ground-breaking. The powerpoint presentations, final paper manuscripts and time schedule for live presentations over the web had been available for 3 weeks prior to the start of the conference for all registrants, so they could pick and choose the presentations they want to attend and think about questions that they might want to ask. The live audio presentations were also recorded and are part of the permanent CISSE archive, which includes all power point presentations, papers and recorded presentations. All aspects of the conference were managed on-line; not only the reviewing, submissions and registration processes; but also the actual conference. Conference participants - authors, presenters and attendees - only needed an internet connection and sound available on their computers in order to be able to contribute and participate in this international ground-breaking conference. The on-line structure of this high-quality event allowed academic professionals and industry participants to contribute work and attend world-class technical presentations based on rigorously refereed submissions, live, without the need for investing significant travel funds or time out of the office. Suffice to say that CISSE received submissions from more than 50 countries, for whose researchers, this opportunity presented a much more affordable, dynamic and well-planned event to attend and submit their work to, versus a classic, on-the-ground conference. The CISSE conference audio room provided superb audio even over low speed internet connections, the ability to display PowerPoint presentations, and cross-platform compatibility (the conferencing software runs on Windows, Mac, and any other operating system that supports Java). In addition, the conferencing system allowed for an unlimited number of participants, which in turn granted CISSE the opportunity to allow all participants to attend all presentations, as opposed to limiting the number of available seats for each session. The implemented conferencing technology, starting with the submission & review system and ending with the online conferencing capability, allowed CISSE to conduct a very high quality, fulfilling event for all participants. See: www.cissee2005.org, sections: IETA, TENE, EIAE
IEC 61499 is the standard for distributed control systems that follows on from the IEC 61131 standard for programmable logic controllers (PLC). This book is a practical guide for component-based development of distributed embedded and control systems as proposed by this international standard.
Die Entwicklung eingebetteter Systeme wird aufgrund der immer anspruchsvolleren Anwendungen sowie der Verwendung von leistungsfähigeren Hardware-Architekturen (z.B. Multicore-, Hybrid-Systeme) immer komplexer. Modellgetriebene Methoden reduzieren die Komplexität des Systems mittels angemessenen Abstraktionsniveaus. Diese Arbeit stellt die modellgetriebene Entwicklungsmethodik DMOSES (Determi-nistische Modelle für die signalverarbeitenden eingebetteten Systeme) vor. Diese Methodik strebt die Verbesserung der Entwicklung hybrider eingebetteten Systeme (z.B. CPUs und FPGAs) hinsichtlich der Komplexität mittels anpassbarer Abstraktionseben, automatischer Codegenerierung und Systemverifikation an. Systeme werden mittels UML-Verhaltensmodelle spezifiziert, deren erweiterte Semantik relevante funktionale und nicht-funktionale Aspekte hybrider eingebetteten Systemen beschreibt. Eine anpassbare Abstraktionsebene wird durch die Integration von automatischer Code-Generierung und optimierbarem Code erreicht. Außerdem werden Sicherheitsanforderungen durch die Integration von Analysetechniken (Formale Verifikation, Ausführungszeit-Analyse und Software-Verträgen) in die Entwicklungsmethodik verifiziert.
The present book includes extended and revised versions of a set of selected papers from the 1st International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2011) which was sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC) and held in Noordwijkerhout, The Netherlands. SIMULTECH 2011 was technically co-sponsored by the Society for Modeling & Simulation International (SCS), GDR I3, Lionphant Simulation and Simulation Team and held in cooperation with ACM Special Interest Group on Simulation and Modeling (ACM SIGSIM) and the AIS Special Interest Group of Modeling and Simulation (AIS SIGMAS).
The conference proceedings of: International Conference on Industrial Electronics, Technology & Automation (IETA 05) International Conference on Telecommunications and Networking (TeNe 05) International Conference on Engineering Education, Instructional Technology, Assessment, and E-learning (EIAE 05) include a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the areas of: Industrial Electronics, Technology and Automation, Telecommunications, Networking, Engineering Education, Instructional Technology and e-Learning. The three conferences, (IETA 05, TENE 05 and EIAE 05) were part of the International Joint Conference on Computer, Information, and System Sciences, and Engineering (CISSE 2005). CISSE 2005, the World's first Engineering/Computing and Systems Research E-Conference was the first high-caliber Research Conference in the world to be completely conducted online in real-time via the internet. CISSE received 255 research paper submissions and the final program included 140 accepted papers, from more than 45 countries. The whole concept and format of CISSE 2005 was very exciting and ground-breaking. The powerpoint presentations, final paper manuscripts and time schedule for live presentations over the web had been available for 3 weeks prior to the start of the conference for all registrants, so they could pick and choose the presentations they want to attend and think about questions that they might want to ask. The live audio presentations were also recorded and are part of the permanent CISSE archive, which includes all power point presentations, papers and recorded presentations. All aspects of the conference were managed on-line; not only the reviewing, submissions and registration processes; but also the actual conference. Conference participants - authors, presenters and attendees - only needed an internet connection and sound available on their computers in order to be able to contribute and participate in this international ground-breaking conference. The on-line structure of this high-quality event allowed academic professionals and industry participants to contribute work and attend world-class technical presentations based on rigorously refereed submissions, live, without the need for investing significant travel funds or time out of the office. Suffice to say that CISSE received submissions from more than 50 countries, for whose researchers, this opportunity presented a much more affordable, dynamic and well-planned event to attend and submit their work to, versus a classic, on-the-ground conference. The CISSE conference audio room provided superb audio even over low speed internet connections, the ability to display PowerPoint presentations, and cross-platform compatibility (the conferencing software runs on Windows, Mac, and any other operating system that supports Java). In addition, the conferencing system allowed for an unlimited number of participants, which in turn granted CISSE the opportunity to allow all participants to attend all presentations, as opposed to limiting the number of available seats for each session. The implemented conferencing technology, starting with the submission & review system and ending with the online conferencing capability, allowed CISSE to conduct a very high quality, fulfilling event for all participants. See: www.cissee2005.org, sections: IETA, TENE, EIAE