Download Free Methodology For Design And Construction Of Drilled Shafts In Cohesive Soils Book in PDF and EPUB Free Download. You can read online Methodology For Design And Construction Of Drilled Shafts In Cohesive Soils and write the review.

Drilled shafts have been used on a limited scale for many years as an alternative to driven piles in a variety of foundation problems. However, uncertainty about the behavior of the drilled shaft has forestalled widespread adoption. The subject package, by Dr. Lymon C. Reese of the University of Texas, is intended for use by bridge engineers, geotechnical engineers, and builders of pile foundations. The manual contains rational procedures and practical guidelines for the design and construction of drilled shaft foundations. Volume I presents a rational design procedure for drilled shafts under axial loading and includes guidelines on construction methods, inspection, load testing, specifications, and cost estimates. Volume II presents alternative methods for computing the response of the shaft to lateral loading and presents the structural design of the shaft for axial and/or lateral loading.
GSP 185 contains 80 papers presented at the International Foundation Congress and Equipment Expo held in Orlando, Florida, March 15-19, 2009.
This document was written as a resource for participants in a short course covering the topic of construction and design of drilled shaft foundations for bridges and other structures. It is the second edition of a Federal Highway Administration workbook on construction and design of drilled shafts. The first edition was written in 1988 (FHWA-SA-HI-88-042). While introductory material from the 1988 edition was retained, the emphasis in this document is on providing relatively comprehensive information for engineers who already have some experience with drilled shaft construction and/or design. The initial chapters cover an overview of the characteristics of drilled shafts, site investigations for drilled shafts (to collect information for both construction and design), and details of drilled shaft construction. These chapters are followed by several chapters on the design of drilled shafts in soil and rock for both axial and lateral loading, with examples. Both allowable stress design and load and resistance factor design principles are addressed. Details of design calculations procedures are provided in the appendices.
The Deep Mixing Method (DMM), a deep in-situ soil stabilization technique using cement and/or lime as a stabilizing agent, was developed in Japan and in the Nordic countries independently in the 1970s. Numerous research efforts have been made in these areas investigating properties of treated soil, behavior of DMM improved ground under static and d