Download Free Make Your Own Treadle Lathe Book in PDF and EPUB Free Download. You can read online Make Your Own Treadle Lathe and write the review.

Note: This is the Black & White Edition. Full Color and eBook editions are also available."Make Your Own Treadle Lathe" is a practical, step by step guide to building a foot-powered lathe for light duty wood turning. You can build your own treadle lathe by following the well illustrated steps presented in this compact book. The book covers: - Materials & components - Frame and headstock - Belt and tensioner - Tailstock - Tool rest - Flywheel - Using the lathe The author also provides information on some non-turning uses for the lathe and sources for, and some shop-made alternatives to, the parts you may not have. All of the wood needed to build your lathe can be found at the local lumber yard or home center. Use 'Make Your Own Treadle Lathe' to make a near-duplicate of the author's lathe or as inspiration to build the unique human-powered lathe of your dreams. -------------- From the Introduction... Why this book exists: During the twenty years or so since I built this foot-powered treadle lathe, I have received many requests for drawings or plans. The lathe has been used as part of our traditional woodworking demonstrations and it never fails to draw a crowd. Of course, the reason the lathe exists is because I felt a need for it as a tool. Design considerations: Some of the main considerations when designing the lathe were: * Human powered - our solar energy system was pretty small at the time * Size - it had to be less than 42" tall to fit into our old truck * Compact - since it would sit in our small shop most of the time, a small footprint was essential * Portable - as in not too cumbersome or heavy * Functional - it had to perform the basic duties of a light-duty lathe * Adaptable - I had in mind several non-traditional uses for the tool, such as sanding --------------- Many unique and usable lathes have been built using earlier editions of this book. This book provides you with the instructions, photos and illustrations, and inspiration to build your own treadle lathe!
Full color paperback edition. This title is also available as a B&W 'workshop-friendly' paperback edition and as a Kindle eBook."Make Your Own Treadle Lathe" is a practical, step by step guide to building a foot-powered lathe for light duty wood turning. You can build your own treadle lathe by following the well illustrated steps presented in this compact book. The book covers: - Materials & components - Frame and headstock - Belt and tensioner - Tailstock - Tool rest - Flywheel - Using the lathe The author also provides information on some non-turning uses for the lathe and sources for, and some shop-made alternatives to, the parts you may not have. All of the wood needed to build your lathe can be found at the local lumber yard or home center. Use 'Make Your Own Treadle Lathe' to make a near-duplicate of the author's lathe or as inspiration to build the unique human-powered lathe of your dreams. -------------- From the Introduction... Why this book exists: During the twenty years or so since I built this foot-powered treadle lathe, I have received many requests for drawings or plans. The lathe has been used as part of our traditional woodworking demonstrations and it never fails to draw a crowd. Of course, the reason the lathe exists is because I felt a need for it as a tool. Design considerations: Some of the main considerations when designing the lathe were: * Human powered - our solar energy system was pretty small at the time * Size - it had to be less than 42" tall to fit into our old truck * Compact - since it would sit in our small shop most of the time, a small footprint was essential * Portable - as in not too cumbersome or heavy * Functional - it had to perform the basic duties of a light-duty lathe * Adaptable - I had in mind several non-traditional uses for the tool, such as sanding --------------- Many unique and usable lathes have been built using earlier editions of this book. This book provides you with the instructions, photos and illustrations, and inspiration to build your own treadle lathe!
This machine would be a useful addition to any woodwork shop, enabling new products to be made without the use of electricity. It could be the basis for a village industry, and can be built by most small metal workshops and blacksmiths.
For thirty years, Roy Underhill's PBS program, The Woodwright's Shop, has brought classic hand-tool craftsmanship to viewers across America. Now, in his seventh book, Roy shows how to engage the mysteries of the splitting wedge and the cutting edge to shape wood from forest to furniture. Beginning with the standing tree, each chapter of The Woodwright's Guide explores one of nine trades of woodcraft: faller, countryman and cleaver, hewer, log-builder, sawyer, carpenter, joiner, turner, and cabinetmaker. Each trade brings new tools and techniques; each trade uses a different character of material; but all are united by the grain in the wood and the enduring mastery of muscle and steel. Hundreds of detailed drawings by Eleanor Underhill (Roy's daughter) illustrate the hand tools and processes for shaping and joining wood. A special concluding section contains detailed plans for making your own foot-powered lathes, workbenches, shaving horses, and taps and dies for wooden screws. The Woodwright's Guide is informed by a lifetime of experience and study. A former master craftsman at Colonial Williamsburg, Roy has inspired millions to "just say no to power tools" through his continuing work as a historian, craftsman, activist, and teacher. In The Woodwright's Guide, he takes readers on a personal journey through a legacy of off-the-grid, self-reliant craftsmanship. It's a toolbox filled with insight and technique as well as wisdom and confidence for the artisan in all of us.
Practical, fully illustrated guide to making a wooden flute with tools that are common in many home workshops or can be built. Playing instructions included.
"I have made it my concern to hunt out this technique for your study as I learned it by looking and listening." On Divers Arts, c. 1122, is the oldest extant manual on artistic crafts to be written by a practicing artist. Before Theophilus, manuscripts on the arts came from scholars and philosophers standing outside the actual profession. On Divers Arts describes actual 12th-century techniques in painting, glass, and metalwork, which the Benedictine author wished to pass on to those gifted by God with a talent for making beautiful things. Theophilus teaches, with rigorous attention to fact but also with great reverence the making of pigments for fresco painting, the manufacture of glue, the technique of gold leaf on parchment (the first recorded European reference to true paper), how to blow glass and design stained glass windows, how to fashion gold and silver chalices, and how to make a pipe organ and church bells. Precise instruction on enameling, chasing, repoussé, niello, and beaded wire work prove Theophilus's first-hand knowledge of his craft. While 90 percent of Theophilus's writing is sound technical knowledge, medieval folk lore occasionally spices his text: "Tools are also made harder by hardening them in the urine of a small red-headed boy than by doing so in plain water." But the magnificent fact of On Divers Art remains its status as the first technical treatise on painting, glass, and metalwork, for which actual specimens still survive. The editors have taken care to ensure both philological and technological accuracy for this authoritative edition of a medieval classic, a manual of great importance to craftsmen, historians of art and science, and all who delight in the making of the beautiful.
Picking fresh berries from your own home-grown plants is a treat no matter where you live, but in the cold short season climate of the northern Midwest there is a special satisfaction. Between the long winters, short summers, wild critters and varies weather it is a real joy to finall hold in your hand sun ripened strawberries, raspberries, blueberries and grapes that you grew yourself. This book helps you get there.
What if I could harness this energy? An unusual question for anyone putting in a long stint on a treadmill perhaps, and yet human power is a very old, practical and empowering alternative to fossil fuels. Replacing motors with muscles can be considered a political act -- an act of self-sufficiency that gains you independence. The Human-Powered Home is a one-of-a-kind compendium of human-powered devices gathered from a unique collection of experts. Enthusiasts point to the advantages of human power: Portable and available on-demand Close connection to the process or product offers more control Improved health and fitness The satisfaction of being able to make do with what is available This book discusses the science and history of human power and examines the common elements of human-powered devices. It offers plans for making specific devices, grouped by area of use, and features dozens of individuals who share technical details and photos of their inventions. For those who want to apply their own ingenuity, or for those who have never heard of human-powered machines, this book is a fine reference. For those who are beginning to understand the importance of a life of reduced dependency on fossil fuels, this book could be a catalyst for change.
"The Author of this volume is a man not only of wide experience in practical woodwork, but who has for many years been an Instructor at Technical Schools, and has also the additional advantage of having an intimate knowledge of all kinds of woodworking tools and machinery." In the classic 1922 book: WOOD-TURNING ON THE FOOT TREADLE LATHE, William Fairham covers the use of the Foot Treadle Lathe in the art of turning wooden objects. He covers treadling, the care of turning tools, and the various forms turned, such as split & spiral, hollow & ball, square and ring turning. His first hand knowledge of wood turning on a foot treadle lathe remains an invaluable resource for the wood turner of today.