Download Free Laboratory Evaluation Of Asphalt Concrete Mixtures Containing High Contents Of Reclaimed Asphalt Pavement Rap And Binder Book in PDF and EPUB Free Download. You can read online Laboratory Evaluation Of Asphalt Concrete Mixtures Containing High Contents Of Reclaimed Asphalt Pavement Rap And Binder and write the review.

This study investigated the effect of added asphalt binder content on the performance and volumetric properties of asphalt concrete mixtures containing reclaimed asphalt pavement (RAP) in the amounts of 0%, 20%, and 40%. A laboratory-produced mixture containing 100% RAP was also evaluated. Performance of the mixtures was evaluated based on three criteria: stiffness (dynamic modulus), fatigue resistance, and rutting resistance (flow number and asphalt pavement analyzer). Results showed that a 0.5% increase in binder content improved both the fatigue and rutting resistance of the 0% and 20% RAP mixtures with only slight (insignificant) decreases in dynamic modulus. However, the addition of various amounts of binder to the 40% RAP mixture led to a significant decrease in rutting resistance with little or no improvement to fatigue resistance. Volumetric analysis was performed on all of the mixtures, and detailed results are presented. Based on the results of the study, the authors recommend that the Virginia Department of Transportation supplement current asphalt mixture design procedures that are based on mixture volumetric properties with laboratory-mixture performance testing.
TRB's National Cooperative Highway Research Program (NCHRP) Report 752: Improved Mix Design, Evaluation, and Materials Management Practices for Hot Mix Asphalt with High Reclaimed Asphalt Pavement Content describes proposed revisions to the American Association of State Highway and Transportation Officials (AASHTO) R 35, Superpave Volumetric Design for Hot Mix Asphalt, and AASHTO M 323, Superpave Volumetric Mix Design, to accommodate the design of asphalt mixtures with high reclaimed asphalt pavement contents.
Pavement and Asset Management contains contributions from the World Conference on Pavement and Asset Management (WCPAM 2017, Baveno, Italy, 12-16 June 2017). For the first time, the European Pavement and Asset Management Conference (EPAM) and the International Conference on Managing Pavement Assets (ICMPA) were joining forces for a global event that aimed not only at academics and researchers, but also at practitioners, engineers and technicians dealing with everyday tasks and responsibilities related to transport infrastructures pavement and asset management. Pavement and Asset Management covers a wide range of topics, from emerging research to engineering practice, and is grouped under the following themes: - Data quality and monitoring - Economics, political and environmental management, strategies - Deterioration models - Key performance indicators - PMS-case studies - Design and materials - M&R treatments - LCA & LCCA - Risk and safety - Bridge and tunnel management - Smart infrastructure and IT Pavement and Asset Management will be valuable to academics and professionals interested and/or involved in issues related to transport infrastructures pavement and asset management.
Currently in Iowa, the amount of RAP materials allowed for the surface layer is limited to 15% by weight. The objective of this project was to develop quality standards for inclusion of RAP content higher than 15% in asphalt mixtures. To meet Superpave mix design requirements, it was necessary to fractionate the RAP materials. Based on the extensive sieve-by-sieve analysis of RAP materials, the optimum sieve size to fractionate RAP materials was identified. To determine if the higher percentage of RAP materials than 15% can be used in Iowa's state highway, three test sections with 30.0%, 35.5% and 39.2% of RAP materials were constructed on Highway 6 in Iowa City. The construction of the field test sections was monitored and the cores were obtained to measure field densities of test sections. Field mixtures collected from test sections were compacted in the laboratory in order to test the moisture sensitivity using a Hamburg Wheel Tracking Device. The binder was extracted from the field mixtures with varying amounts of RAP materials and tested to determine the effects of RAP materials on the PG grade of a virgin binder. Field cores were taken from the various mix designs to determine the percent density of each test section. A condition survey of the test sections was then performed to evaluate the short-term performance.
The proliferation of technological capability, miniaturization, and demand for aerial intelligence is pushing unmanned aerial systems (UAS) into the realm of a multi-billion dollar industry. This book surveys the UAS landscape from history to future applications. It discusses commercial applications, integration into the national airspace system (NAS), System function, operational procedures, safety concerns, and a host of other relevant topics. The book is dynamic and well-illustrated with separate sections for terminology and web- based resources for further information.
Bituminous Mixtures and Pavements contains 113 accepted papers from the 6th International ConferenceBituminous Mixtures and Pavements (6th ICONFBMP, Thessaloniki, Greece, 10-12 June 2015). The 6th ICONFBMP is organized every four years by the Highway Engineering Laboratory of the Aristotle University of Thessaloniki, Greece, in conjunction with
Bituminous Mixtures and Pavements VIII contains 114 papers as presented at the 8th International Conference ‘Bituminous Mixtures and Pavements’ (8th ICONFBMP, 12-14 June 2024, Thessaloniki, Greece). The contributions reflect the research and practical experience of academics and practicing engineers from thirty-four (34) different countries, and cover a wide range of topics: Session I: Bitumen, Modified binders, Aggregates, and Subgrade Session II: Bituminous mixtures (Design, Construction, Testing, Performance) Session III: Pavements (Design, Construction, Maintenance, Sustainability, Energy and Environmental consideration) Session IV: Pavement management and Geosynthetics Session V: Pavement recycling Session VI: Pavement surface characteristics, Pavement performance monitoring, Safety Session VII: Biomaterials in pavement engineering Session VIII: Prediction models of pavement performance Bituminous Mixtures and Pavements VIII covers recent advances in highway materials technology and pavement engineering, and will be of interest to scientists and professionals involved or interested in these areas. The ICONFBMP-conferences have been organized every four years since 1992. This 8th conference was jointly organized by: Laboratory of Highway Engineering, Aristotle University of Thessaloniki, Greece; Built Environment Research Institute (BERI), University of Ulster, UK; University of Texas San Antonio (UTSA), USA; Laboratory for Advanced Construction Technology (LACT), Technological Institute of Iowa, USA; Technological University of Delft (TUDelft), The Netherlands, and University of Antwerp, (UA), Belgium.