Download Free Jb T 4129 1999 Translated English Of Chinese Standard Jbt 4129 1999 Jb T4129 1999 Jbt4129 1999 Book in PDF and EPUB Free Download. You can read online Jb T 4129 1999 Translated English Of Chinese Standard Jbt 4129 1999 Jb T4129 1999 Jbt4129 1999 and write the review.

The value listed in this Standard are conceptually not allowed in the stamping tolerance. However, general stamping parts come with varying degrees of burrs. When the burr.
This Standard specifies the inspection rules and test methods of industrial robot. This Standard is applicable to the industrial robots for various uses.
This Standard specifies the definition, product category, technical requirements, test methods and inspection rules of vortex shedding flow transducer.
This standard specifies the type, basic parameters, technical requirements, safety requirements, test methods, inspection rules, marking, packaging, transportation and storage of KQJ downhole drills. This standard applies to non-self-propelled downhole drills (hereinafter referred to as drills).
This standard specifies the moving bend clamp plate applicable to thread specifications of M6 ~ M42.
This standard specifies the balance method, grade of balance quality, precision requirements of the balancing equipment, calibration method, and verification of the fan rotor. This standard is applicable to the balance of the rotor or impeller of the centrifugal fan and axial fan.
This document provides the comprehensive list of Chinese Industry Standards - Category: JB; JB/T; JBT.
This Standard specifies the basic environmental conditions, test methods, and inspection rules for the transportation and storage of instruments. This Standard applies to instrument products with exit-factory packaging. For products with special storage and transportation requirements, they can be separately specified in their product standards.
This Standard specifies the special requirements for vacuum heat treatment equipment, commonly-used metal materials for vacuum heat treatment, technological process of vacuum heat treatment and its basic technological parameters. This Standard applies to technologies such as metal vacuum quenching, vacuum tempering, vacuum annealing, vacuum solution heat treatment, and vacuum aging.
This Part of JB/T 1647 specifies the technical requirements, test methods, inspection rules, packaging, labeling, and transport of the straight-side power-press. This Part applies to straight-side single-, dual-, four-point mechanical power presses. It also applies to straight-side single, double, four-point trimming power-presses. This Part does not apply to hot forging power-presses, closed high-speed power-presses, and other special power-presses.