Download Free Introduction To Underground Coal Mining Book in PDF and EPUB Free Download. You can read online Introduction To Underground Coal Mining and write the review.

Coal will continue to provide a major portion of energy requirements in the United States for at least the next several decades. It is imperative that accurate information describing the amount, location, and quality of the coal resources and reserves be available to fulfill energy needs. It is also important that the United States extract its coal resources efficiently, safely, and in an environmentally responsible manner. A renewed focus on federal support for coal-related research, coordinated across agencies and with the active participation of the states and industrial sector, is a critical element for each of these requirements. Coal focuses on the research and development needs and priorities in the areas of coal resource and reserve assessments, coal mining and processing, transportation of coal and coal products, and coal utilization.
This book teaches readers ground engineering principles and related mining and risk management practices associated with underground coal mining. It establishes the basic elements of risk management and the fundamental principles of ground behaviour and then applies these to the essential building blocks of any underground coal mining system, comprising excavations, pillars, and interactions between workings. Readers will also learn about types of ground support and reinforcement systems and their operating mechanisms. These elements provide the platform whereby the principles can be applied to mining practice and risk management, directed primarily to bord and pillar mining, pillar extraction, longwall mining, sub-surface and surface subsidence, and operational hazards. The text concludes by presenting the framework of risk-based ground control management systems for achieving safe workplaces and efficient mining operations. In addition, a comprehensive reference list provides additional sources of information on the subject. Throughout, a large variety of examples show good and bad mining situations in order to demonstrate the application, or absence, of the established principles in practice. Written by an expert in underground coal mining and risk management, this book will help students and practitioners gain a deep understanding of the basic principles behind designing and conducting mining operations that are safe, efficient, and economically viable. Provides a comprehensive coverage of ground engineering principles within a risk management framework Features a large variety of examples that show good and poor mining situations in order to demonstrate the application of the established principles in practice Ideal for students and practitioners About the author Emeritus Professor Jim Galvin has a relatively unique combination of industrial, research and academic experience in the mining industry that spans specialist research and applied knowledge in ground engineering, mine management and risk management. His career encompasses directing ground engineering research groups in South Africa and Australia; practical mining experience, including active participation in the mines rescue service and responsibility for the design, operation, and management of large underground coal mines and for the consequences of loss of ground control as a mine manager; appointments as Professor and Head of the School of Mining Engineering at the University of New South Wales; and safety advisor to a number of Boards of Directors of organisations associated with mining. Awards Winner of the ACARP Excellence Research Award 2016. The Australian Coal Industry's Research Program selects recipients to receive ACARP Research and Industry Excellence Awards every two years. The recipients are selected on the recommendation of technical committees. They are honored for achievement of a considerable advance in an area of importance to the Australian coal mining industry. An important criterion is the likelihood of the results from the project being applied in mines. Winner of the Merv Harris Award from the Mine Managers Association of Australia. The Merv Harris Award is named for Merv Harris who donated money to be invested for a continuing award in 1988. With the award, the Mine Managers Association of Australia honors members of the Association who demonstrate technical achievement in the Australian Coal Mining Industry. The first award was granted in 1990, since then, only two people have received this honor. The book has received the following awards.... AGS (Australian Geomechanics Society) congratulates Dr Galvin for these awards
Underground Mining Methods presents the latest principles and techniques in use today. Reflecting the international and diverse nature of the industry, a series of mining case studies is presented covering the commodity range from iron ore to diamonds extracted by operations located in all corners of the world. Industry experts have contributed 77 chapters. This book is certain to become a standard for every practicing mining engineer and student alike. Sections include: General Mine Design Considerations, Room-and-Pillar Mining of Hard Rock/Soft Rock, Longwall Mining of Hard Rock, Shrinkage Stoping, Sublevel Stoping, Cut-and-Fill Mining, Sublevel Caving, Panel Caving, Foundations for Design, and Underground Mining Looks to the Future.
Advanced Mine Ventilation presents the reader with a unique book providing the theory and applications for designing mine ventilation with computers, controlling respirable coal dust and diesel particulate matter, combustible gas control and, mine fire management. The book summarizes the latest knowledge created in the past 40 years in these areas. Authored by an expert in the field with 50 years' experience, the book is a great combination of theory and applications. The mine ventilation section provides computer programs (both FORTRAN and C++) to calculate not only air quantities and pressure losses but also the concentration of any pollutant in all junctions and branches of the mine network. Small particle mechanics and dust control is covered in the second section of the book. The third section on combustible gas control discusses all aspects of mine gases from origin to control. The last section on mine fire control discusses spontaneous combustion, frictional ignitions, mine explosions, and mine sealing and recovery. The book is not only a very good reference book but also an excellent textbook for two graduate level courses in Mining Engineering. - Provides the latest knowledge on the four related topics of mine environment control; that is, ventilation, dust, gas, and fire in a single volume - Computer simulation of mine ventilation in both FORTRAN and C++ - State-of-the-art respirable dust control - Mine degasification and methane production from a coal lease - Mine fire management
The Office of Industrial Technologies (OIT) of the U. S. Department of Energy commissioned the National Research Council (NRC) to undertake a study on required technologies for the Mining Industries of the Future Program to complement information provided to the program by the National Mining Association. Subsequently, the National Institute for Occupational Safety and Health also became a sponsor of this study, and the Statement of Task was expanded to include health and safety. The overall objectives of this study are: (a) to review available information on the U.S. mining industry; (b) to identify critical research and development needs related to the exploration, mining, and processing of coal, minerals, and metals; and (c) to examine the federal contribution to research and development in mining processes.
Concern over the effects of airborne pollution, green house gases, and the impact of global warming has become a worldwide issue that transcends international boundaries, politics, and social responsibility. The 2nd Edition of Coal Energy Systems: Clean Coal Technology describes a new generation of energy processes that sharply reduce air emissions and other pollutants from coal-burning power plants. Coal is the dirtiest of all fossil fuels. When burned, it produces emissions that contribute to global warming, create acid rain, and pollute water. With all of the interest and research surrounding nuclear energy, hydropower, and biofuels, many think that coal is finally on its way out. However, coal generates half of the electricity in the United States and throughout the world today. It will likely continue to do so as long as it's cheap and plentiful [Source: Energy Information Administration]. Coal provides stability in price and availability, will continue to be a major source of electricity generation, will be the major source of hydrogen for the coming hydrogen economy, and has the potential to become an important source of liquid fuels. Conservation and renewable/sustainable energy are important in the overall energy picture, but will play a lesser role in helping us satisfy our energy demands today. Dramatically updated to meet the needs of an ever changing energy market, Coal Energy Systems, 2nd Edition is a single source covering policy and the engineering involved in implementing that policy. The book addresses many coal-related subjects of interest ranging from the chemistry of coal and the future engineering anatomy of a coal fired plant to the cutting edge clean coal technologies being researched and utilized today. A 50% update over the first edition, this new book contains new chapters on processes such as CO2 capture and sequestration, Integrated Gasification Combined Cycle (IGCC) systems, Pulverized-Coal Power Plants and Carbon Emission Trading. Existing materials on worldwide coal distribution and quantities, technical and policy issues regarding the use of coal, technologies used and under development for utilizing coal to produce heat, electricity, and chemicals with low environmental impact, vision for utilizing coal well into the 21st century, and the security coal presents. - Clean Liquids and Gaseous Fuels from Coal for Electric Power - Integrated Gasification Combined Cycle (IGCC) systems - Pulverized-Coal Power Plants - Advanced Coal-Based Power Plants - Fluidized-Bed Combustion Technology - CO2 capture and sequestration
This revision of the standard reference in the field has been updated to reflect the enormous progress made in the sciences of coal mine ground control. Many chapters are completely new and virtually all have been substantially rewritten. The book covers common ground control problems underground, rock properties and in situ stresses, geological effects and roof stability classification and investigation, roof bolting, coal pillars, ground control in longwall mining and multiple-seam mining, bumps, instrumentation, special supports and problems and surface subsidence.
Underground Coal Gasification (UCG) is carried out in unmined coal seams, using wells drilled from the surface and converting coal into synthesis gas. The gas can be used for power generation and synthesis of automotive fuels, fertilizers and other products. UCG offers financial, social, and environmental benefits over conventional coal extraction and utilization methods and may play a critical role in ensuring energy security in the future. Underground Coal Gasification and Combustion provides an overview of underground coal gasification technology, its current status and future directions. Comprehensive in approach, the book covers history, science, technology, hydrogeology, rock mechanics, environmental performance, economics, regulatory and commercial aspects of UCG projects. The first book on the subject in forty years, it is unique in analysing more than a century of global UCG developments by experts from Australia, Canada, Poland, Russia, Ukraine, United Kingdom, the USA and Uzbekistan. - Provides researchers, engineers, industry, educators and regulators with an authoritative overview of science and practical applications of underground coal gasification technologies - Offers insight into efficiency, environmental performance, costs, permitting issues and commercial aspects of UCG projects - Written by scientists and practitioners of UCG technology sharing hands-on experience of step-by-step UCG implementation