Download Free Influence Of Strain On The Functionality Of Ink Jet Printed Thin Films And Devices On Flexible Substrates Book in PDF and EPUB Free Download. You can read online Influence Of Strain On The Functionality Of Ink Jet Printed Thin Films And Devices On Flexible Substrates and write the review.

Ink-jet printed devices on the flexible substrate are inexpensive and large area compatible as compared to rigid substrates. However, during fabrication and service they are subjected to complex strains, resulting in crack formation or delamination within the layers, affecting the device performance. Therefore, it is necessary to understand their failure mechanisms by correlating their electrical or structural properties with applied strain, supported by detailed microstructural investigations.
Ink-jet printed devices on the flexible substrate are inexpensive and large area compatible as compared to rigid substrates. However, during fabrication and service they are subjected to complex strains, resulting in crack formation or delamination within the layers, affecting the device performance. Therefore, it is necessary to understand their failure mechanisms by correlating their electrical or structural properties with applied strain, supported by detailed microstructural investigations. This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.
This work aimed at designing, studying and producing the first prototypes of KIDs tailored for fusion plasma polarimetric diagnostics. Diamond was considered for the first time as substrate material for low-temperature superconducting detectors given its unmatched optical, radiation hardness and thermal qualities, properties necessary for working environments potentially saturated with radiation. This work represents a first step toward the optimization and final application of this technology.
Solid state batteries with a lithium metal electrode are considered the next generation of high energy battery technology. Unfortunately, lithium metal is prone to harmful protrusion or dendrite growth which causes dangerous cell failure. Within this work the problem of protrusion growth is tackled by deriving a novel electro-chemo-mechanical theory tailored for binary solid state batteries which is then used to discuss the impact of mechanics on interface stability by numerical studies.
Water diffusing into silica surfaces gives rise for several effectson diffusion behaviour and mechanical properties. Water added to silica glass increases its specific volume so that the silica expands near the surface. Mechanical boundary conditions give rise for compressive “swelling stresses”. This fact provides a tool for the interpretation of many experimental observations from literature.
Water diffusing into silica surfaces gives rise for several effects on diffusion behaviour and mechanical properties. In a preceding booklet, we focused on diffusion and fiber strengths and deformations which were obtained by water soaking under external loading. In the present booklet we deal with results and interpretations of strength increase in the absence of applied stresses.
During the production of fiber-reinforced thermosets, the resin material undergoes a reaction that can lead to damage. A two-stage polymerization reaction is modeled using molecular dynamics and evaluations of the system including a fiber surface are performed. In addition, a phase-field model for crack propagation in heterogeneous systems is derived. This model is able to predict crack growth where established models fail. Finally, the model is used to predict crack formation during curing.
The main objective of this work is to significantly deepen the understanding of the material and the structural behaviour of continuous-discontinuous SMC composites, following a holistic approach to investigate microscopic aspects, macroscopic mechanical behaviour as well as failure evolution at the coupon, structure and component level. In addition, criteria to evaluate the effect of hybridisation are introduced and modelling approaches are presented and discussed.
Hierarchically structured active materials in electrodes of lithium-ion cells are promising candidates for increasing gravimetric energy density and improving rate capability of the system. To investigate the influence of cathode structures on the performance of the whole cell, efficient tools for calculating effective transport properties of granular systems are developed and their influence on the electrochemical performance is investigated in specially adapted cell models.