Download Free General Decoupling Theory Of Multivariable Process Control Systems Book in PDF and EPUB Free Download. You can read online General Decoupling Theory Of Multivariable Process Control Systems and write the review.

This reference book can be read at different levels, making it a powerful source of information. It presents most of the aspects of control that can help anyone to have a synthetic view of control theory and possible applications, especially concerning process engineering.
Decoupling or non-interactive control has attracted considerable research attention since the 1960s when control engineers started to deal with multivariable systems. The theory and design techniques for decoupling control have now, more or less matured for linear time-invariant systems, yet there is no single book which focuses on such an important topic. The present monograph fills this gap by presenting a fairly comprehensive and detailed treatment of decoupling theory and relevant design methods. Decoupling control under the framework of polynomial transfer function and frequency response settings, is included as well as the disturbance decoupling problem. The emphasis here is on special or relatively new compensation schemes such as (true and virtual) feedforward control and disturbance observers, rather than use of feedback control alone. The results are presented in a self-contained way and only the knowledge of basic linear systems theory is assumed of the reader.
Introduction to Process Control, Second Edition provides a bridge between the traditional view of process control and the current, expanded role by blending conventional topics with a broader perspective of more integrated process operation, control, and information systems. Updating and expanding the content of its predecessor, this second edition
Quantitative Process Control Theory explains how to solve industrial system problems using a novel control system design theory. This easy-to-use theory does not require designers to choose a weighting function and enables the controllers to be designed or tuned for quantitative engineering performance indices such as overshoot.In each chapter, a s
The introduction of the microprocessor in computer and system engineering has motivated the development of many new concepts and has simplified the design of many modern industrial systems. During the first decade of their life. microprocessors have shown a tremendous evolution in all possible directions (technology. power. functionality. I/O handling. etc). Of course putting the microprocessors and their environmental devices into properly operating systems is a complex and difficult task requiring high skills for melding and integrating hardware. and systemic components. software This book was motivated by the editors' feeling that a cohesive reference is needed providing a good coverage of modern industrial applications of microprocessor-based real time control, together with latest advanced methodological issues. Unavoidably a single volume cannot be exhaustive. but the present book contains a sufficient number of important real-time applications. The book is divided in two sections. Section I deals with general hardware. software and systemic topics. and involves six chapters. Chapter 1. by Gupta and Toong. presents an overview of the development of microprocessors during their first twelve years of existence. Chapter 2. by Dasgupta. deals with a number of system software concepts for real time microprocessor-based systems (task scheduling. memory management. input-output aspects. programming language reqUirements.
INRIA, Institut National de Recherche en Informatique et en Automatique
This book contains a derivation of the subset of stabilizing controllers for analog and digital linear time-invariant multivariable feedback control systems that insure stable system errors and stable controller outputs for persistent deterministic reference inputs that are trackable and for persistent deterministic disturbance inputs that are rejectable. For this subset of stabilizing controllers, the Wiener-Hopf methodology is then employed to obtain the optimal controller for which a quadratic performance measure is minimized. This is done for the completely general standard configuration and methods that enable the trading off of optimality for an improved stability margin and/or reduced sensitivity to plant model uncertainty are described. New and novel results on the optimal design of decoupled (non-interacting) systems are also presented. The results are applied in two examples: the one- and three-degree-of-freedom configurations. These demonstrate that the standard configuration is one encompassing all possible feedback configurations. Each chapter is completed by a group of worked examples, which reveal additional insights and extensions of the theory presented in the chapter. Three of the examples illustrate the application of the theory to two physical cases: the depth and pitch control of a submarine and the control of a Rosenbrock process. In the latter case, designs with and without decoupling are compared. This book provides researchers and graduate students working in feedback control with a valuable reference for Wiener–Hopf theory of multivariable design. Basic knowledge of linear systems and matrix theory is required.
Includes: Digital signals and systems. Digital controllers for process control applications. Design of digital controllers. Control of time delay systems. State-space concepts. System identification. Introduction to discrete optimal control. Multivariable control. Adaptive control. Computer aided design for industrial control systems. Reliability and redundancy in microprocessor controllers. Software and hardware aspects of industrial controller implementations. Application of distributed digital control algorithms to power stations. An expert system for process control.
Multivariable Feedback Control: Analysis and Design, Second Edition presents a rigorous, yet easily readable, introduction to the analysis and design of robust multivariable control systems. Focusing on practical feedback control and not on system theory in general, this book provides the reader with insights into the opportunities and limitations of feedback control. Taking into account the latest developments in the field, this fully revised and updated second edition: * features a new chapter devoted to the use of linear matrix inequalities (LMIs); * presents current results on fundamental performance limitations introduced by RHP-poles and RHP-zeros; * introduces updated material on the selection of controlled variables and self-optimizing control; * provides simple IMC tuning rules for PID control; * covers additional material including unstable plants, the feedback amplifier, the lower gain margin and a clear strategy for incorporating integral action into LQG control; * includes numerous worked examples, exercises and case studies, which make frequent use of Matlab and the new Robust Control toolbox. Multivariable Feedback Control: Analysis and Design, Second Edition is an excellent resource for advanced undergraduate and graduate courses studying multivariable control. It is also an invaluable tool for engineers who want to understand multivariable control, its limitations, and how it can be applied in practice. The analysis techniques and the material on control structure design should prove very useful in the new emerging area of systems biology. Reviews of the first edition: "Being rich in insights and practical tips on controller design, the book should also prove to be very beneficial to industrial control engineers, both as a reference book and as an educational tool." Applied Mechanics Reviews "In summary, this book can be strongly recommended not only as a basic text in multivariable control techniques for graduate and undergraduate students, but also as a valuable source of information for control engineers." International Journal of Adaptive Control and Signal Processing
The papers within this volume reflect the multidisciplinary approach taken by the workshop to the development and improvement of existing production control theories and practices as applied to the process industry. Subjects covered include production planning, quality control and assurance, operational control and maintenance strategy. The development of this area is seen by those at the workshop as only being achieved by various groups working together rather than in isolation, so that the overall aim of production control is not lost in too much detail. This volume will provide the reader with essential information on new initiatives in the process industry with regard to production control.