Download Free Four Coupled Tank Locomotive Classes Absorbed By The Great Western Railway Book in PDF and EPUB Free Download. You can read online Four Coupled Tank Locomotive Classes Absorbed By The Great Western Railway and write the review.

This book is a comprehensive history of the four coupled tank engines absorbed by the Great Western Railway – locomotives of nine Broad Gauge companies, nineteen Standard Gauge companies, mainly in the South West which became part of the GWR between the 1870s and 1914, and a further eighteen companies, mainly in South Wales absorbed by the GWR in 1922 and 1923 at the formation of the ‘Big Four’ Grouping. The locomotives described and illustrated range from the 4-4-0 Broad Gauge saddle tanks of the South Devon and Bristol & Exeter Railways to the large 4-4-4 tank locomotives of the Midland & South Western Junction Railway, not forgetting the numerous and varied 0-4-0 pug saddle tanks of the Swansea Harbour Trust and the Powlesland & Mason company. The book includes thirty-two weight diagrams and nearly 200 photographs, many of exotic and rare locomotives.
This book is a comprehensive history of all twenty-six classes of four coupled tank engines commissioned by the Great Western Railway or built at their Wolverhampton and Swindon Works, from the Broad Gauge 2-4-0 and 4-4-0 tanks of the 1840s and 1850s to the well known Collett 0-4-2 branch line engines of classes 48XX (later renumbered 14XX) and 58XX of the 1930s. As well as the Broad Gauge engines, the strange looking ‘Covertibles’ of William Dean, a number of experimental ‘one-off’ designs, the numerous Wolverhampton 0-4-2Ts of the ‘517’ class and the Swindon built ‘2-4-0 ‘Metro Tanks’ are described with – where known – their allocation and operation. The book includes twenty weight diagrams and nearly 300 photographs, over 50 in color. The four-coupled tank engines absorbed by the Great Western from other companies at or before 1923 will be featured in a separate volume to follow.
This book is a comprehensive history of all the 0-6-0 tender locomotives built by the Great Western Railway or by railways absorbed by the GWR from the very earliest broad gauge engines designed by Daniel Gooch to the Collett 2251 class of the 1930s some of which were still under construction at nationalisation. It includes the Joseph Armstrong ‘Standard Goods’ and the famous Dean Goods, many of which served overseas in the two world wars. The text of 40,000 words describes the design, construction and operation of eight GW and five ‘Absorbed’ broad gauge classes, and thirteen GW and thirteen ‘Absorbed’ standard gauge classes. The book has over 250 black and white and 30 color photos, weight diagrams and drawings.
This book is a comprehensive history of all twenty-six classes of four coupled tank engines commissioned by the Great Western Railway or built at their Wolverhampton and Swindon Works, from the Broad Gauge 2-4-0 and 4-4-0 tanks of the 1840s and 1850s to the well known Collett 0-4-2 branch line engines of classes 48XX (later renumbered 14XX) and 58XX of the 1930s. As well as the Broad Gauge engines, the strange looking ‘Covertibles’ of William Dean, a number of experimental ‘one-off’ designs, the numerous Wolverhampton 0-4-2Ts of the ‘517’ class and the Swindon built ‘2-4-0 ‘Metro Tanks’ are described with – where known – their allocation and operation. The book includes twenty weight diagrams and nearly 300 photographs, over 50 in color. The four-coupled tank engines absorbed by the Great Western from other companies at or before 1923 will be featured in a separate volume to follow.
The Great Western Railway experienced the trauma and disruption of the end of the broad gauge in 1892 and were faced with equipping the network with suitable motive power, especially in Devon and Cornwall where the last track conversion had taken place. West of Newton Abbot, the GWR had relied on a variety of 4-4-0, 2-4-0, 0-4-2 and 0-4-4 side and saddle tanks, often doubled-headed, and Dean set about designing a sturdy outside-framed powerful 4-4-0 with 5ft 8in coupled wheels, the 'Dukes', to tackle increasing loads over the heavily graded main line. Then, Churchward came to assist the ailing Locomotive Superintendent, using his knowledge and experience of American and continental practice to develop the Dean designs. He improved the efficiency and performance of the boilers, using the Belgian Belpaire firebox, then developed the tapered 'cone' boiler, and applied it to the chassis of the 'Duke's to form the 'Camel' class, later known as the 'Bulldogs', which eventually numbered 156 locomotives. Finally, in the 1930s when engines of the 'Duke' route availability were still required but their frames were life-expired, their boilers were matched with the stronger frames of the 'Bulldogs' to form the 'Dukedog' class, which lasted until the 1950s, particularly on the former Cambrian lines in mid-Wales. This book recounts the design, construction and operation of these small-wheeled outside-framed locomotives with many rare photos of their operation in the first decade of the twentieth century as well as in more recent times.
Authoritative international survey reviews everything from standard steam engines, diesels and gas turbines to subways and electric motor coaches. Includes details of construction, problems of operation, and building methods. More than 300 illustrations, photographs.
The renowned British railroad historian delivers “a well-illustrated account of the rationale behind Collett’s construction of this 80 strong class” (West Somerset Railway Association). English railway engineer George Jackson Churchward proposed a 5ft 8in wheeled 4-6-0 for mixed traffic duties in 1901 and it was seriously considered in 1905, but it took until 1936 before his successor, Charles Collett, realized the plan by persuading the GWR Board to replace many of the 43XX moguls with modern standard mixed traffic engines that bore a remarkable likeness to the Churchward proposal. David Maidment has written another in his series of “Locomotive Portfolios” for Pen & Sword to coincide with the construction of a new “Grange” at Llangollen from GW standard parts to fill the gap left by the total withdrawal and scrapping of one of that railway’s most popular classes—to their crews at the very least. As well as covering the type’s design and construction, the author deals comprehensively with the allocation and operation of the eighty locomotives and in particular has researched their performance and illustrated it with many examples of recorded logs from the 1930s as well as in more recent times. As in previous volumes, the author has added his own personal experiences with the engines and has sourced more than 250 photos, over 40 of which are in color. “Superbly researched . . . another extraordinary and unreservedly recommended addition to . . . British Railroading History collections.” —Midwest Book Review “Granges worked off-region quite widely, so this is not just a book for the copper-capped chimney brigade; enthusiasts for whom these capable machines are favorites will definitely want this volume on the bookshelf.” —Railway Modeller