Download Free Fatigue Of Asphalt Binders Book in PDF and EPUB Free Download. You can read online Fatigue Of Asphalt Binders and write the review.

This volume highlights the latest advances, innovations, and applications in the field of asphalt pavement technology, as presented by leading international researchers and engineers at the 5th International Symposium on Asphalt Pavements & Environment (ISAP 2019 APE Symposium), held in Padua, Italy on September 11-13, 2019. It covers a diverse range of topics concerning materials and technologies for asphalt pavements, designed for sustainability and environmental compatibility: sustainable pavement materials, marginal materials for asphalt pavements, pavement structures, testing methods and performance, maintenance and management methods, urban heat island mitigation, energy harvesting, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
This work presents the results of RILEM TC 237-SIB (Testing and characterization of sustainable innovative bituminous materials and systems). The papers have been selected for publication after a rigorous peer review process and will be an invaluable source to outline and clarify the main directions of present and future research and standardization for bituminous materials and pavements. The following topics are covered: - Characterization of binder-aggregate interaction - Innovative testing of bituminous binders, additives and modifiers - Durability and aging of asphalt pavements - Mixture design and compaction analysis - Environmentally sustainable materials and technologies - Advances in laboratory characterization of bituminous materials - Modeling of road materials and pavement performance prediction - Field measurement and in-situ characterization - Innovative materials for reinforcement and interlayer systems - Cracking and damage characterization of asphalt pavements - Recycling and re-use in road pavements This is the proceedings of the RILEM SIB2015 Symposium (Ancona, Italy, October 7-9, 2015).
A result of the Strategic Highway Research Program's asphalt research is the development of performance-based specifications for asphalt binders and mixtures to control 3 distress modes: rutting; fatigue cracking; and thermal cracking. The SHRP A-005 project developed detailed pavement performance models to support these binder and mixture specifications and performance-based mixture designs. This report documents the findings of this extensive research effort and provides supporting data for the performance-based specifications and mixture design procedure called SUPERPAVE. The A-005 contract developed and used a sophisticated, mechanistic-based pavement performance model to define the relationships between asphalt binder and mixture properties and pavement distress. A comprehensive pavement performance model was developed that predicts the amount of fatigue cracking, thermal cracking and rutting in asphalt concrete pavements with time, using results from the accelerated laboratory tests. The pavement performance models for each distress were also used to confirm the relevant binder and mixture properties established by other SHRP contractors. The model has 3 parts: a mixture evaluation model; a pavement response model; and a pavement distress model.
Fatigue cracking is one of the primary modes of failure in asphalt pavements. Cracking typically occurs within the asphalt binder phase of asphalt mixtures. Thus, asphalt binder fatigue resistance is critical in determining overall pavement fatigue performance. One procedure commonly used to characterize asphalt binder fatigue resistance is the time sweep test, which consists of repeated torsional loading of a cylindrical specimen in the Dynamic Shear Rheometer (DSR). Generally, apparent changes in material properties with respect to number of cycles of loading are used to define fatigue failure of the asphalt binder. Results of this test have been shown to correlate well with asphalt mixture fatigue performance. However, the mechanisms responsible for changes in material properties during fatigue testing in the DSR were previously not well understood. Results in this study demonstrate that fracture can account for changes in loading resistance of asphalt binders during time sweep testing. Under cyclic torsional loading of cylindrical specimens, macro fracture is shown to manifest in the form of edge fracture. Edge fracture is a circumferential crack starting at the periphery of a cylindrical sample that propagates inward as loading is applied, reducing the effective sample size. Digital visualization of the fractured specimens allowed for determination of the fractured and intact sample area. Predictions of fracture propagation based on measurements of loading resistance and fracture mechanics concepts agreed favorably with actual measurements based on visualization. Furthermore, the fracture morphology and progression of crack growth of asphalt binders matched those observed for other materials under similar loading conditions. Based on these results, fatigue damage characterization of asphalt binders can be improved by incorporating fracture mechanics into an analysis framework for DSR fatigue test results. An analysis framework based on fracture principles is presented. The proposed model allows predicting fatigue life at any loading amplitude using the results of a single fatigue test. Additionally, it is demonstrated that time-temperature superposition is applicable to fatigue crack propagation of asphalt binders, allowing for efficient prediction of fatigue performance at multiple temperatures. The model is validated using a comparison between asphalt mixture and binder fatigue test results.
The aim of the studies presented in this report is the implementation of rational concepts and testing procedures for the design and manufacture of bituminous materials for applications in pavement construction. Practical test procedures are recommended for binder evaluation, mix design and performance assessment of bituminous materials. The three main topics addressed are binder testing, mix design and mechanical testing of mixtures. Each is examined through interlaboratory tests and there is a literary review of existing practices and methods for the production of polymer modified binders, mixture design and the mechanical properties of mixtures.