Download Free Fabrication And Characterization Of Carbon Nanotubes For Biomedical Applications Book in PDF and EPUB Free Download. You can read online Fabrication And Characterization Of Carbon Nanotubes For Biomedical Applications and write the review.

Abstract: Recently, nanomaterials have been vigorously studied for the development of biosensors. Among them, carbon nanotubes (CNTs) have stimulated enormous interest for constructing biosensors due to their unique physical and chemical properties such as high surface-to-volume ratio, high conductivity, high strength and chemical inertness. Our study is to develop a general design of biosensors based on vertically aligned CNT arrays. Glucose biosensor is selected as the model system to verify the design of biosensors. In the preliminary design, glucose oxidase (GOx) is attached to the walls of the porous alumina membrane by adsorption. Porous highly ordered anodized aluminum oxide (AAO) prepared by two-step anodization are used as templates. Deposited gold on both sides of template surfaces serve as a contact and prevent non-specific adhesion of GOx on the surface. In order to find out optimized thickness of gold coating, the oxidation and reduction (redox) reaction in [Fe(CN)6]3\168C /[Fe(CN)6]4\168C system is monitored by Cyclic Voltammetry (CV). Subsequently, enzymatic redox reaction in glucose solutions is also attempted by CV. We expect protein layers with GOx form a conductive network. However, no obvious enzymatic redox reaction is detected in the voltammogram. To take advantage of the attractive properties of CNTs, the design of enzyme electrodes is modified by attaching CNT onto the sidewalls of AAO template nanopores and then immobilizing GOx to the sidewalls and tips of CNTs. AAO templates provided vertical, parallel, well separated and evenly spacing nanochannels for CNT growth. Cobalt is used as a catalyst to fabricate CNTs. As a result, multi-walled carbon nanotubes (MWCNTs) are fabricated inside the AAO templates by catalytic chemical vapor deposition (CCVD). Characterization of AAO templates and cobalt electrochemical deposition are employed by scanning electron microscope (SEM), and energy dispersive X-ray spectrometry (EDS). Detailed structure and texture of CNTs are examined by transmission electron microscope (TEM).
Written by the most prominent experts and pioneers in the field, this ready reference combines fundamental research, recent breakthroughs and real-life applications in one well-organized treatise. As such, both newcomers and established researchers will find here a wide range of current methods for producing and characterizing carbon nanotubes using imaging as well as spectroscopic techniques. One major part of this thorough overview is devoted to the controlled chemical functionalization of carbon nanotubes, covering intriguing applications in photovoltaics, organic electronics and materials design. The latest research on novel carbon-derived structures, such as graphene, nanoonions and carbon pea pods, round off the book.
Carbon Nanotube-Based Sensors: Fabrication, Characterization, and Implementation highlights the latest research and developments on carbon nanotubes (CNTs) and their applications in sensors and sensing systems. It offers an overview of CNTs, including their synthesis, functionalization, characterization, and toxicology. It then delves into the fabrication and various applications of CNT-based sensors. FEATURES Defines the significance of different forms of CNT-based sensors synthesized for diverse engineering applications and compares the feasibility of their generation Helps readers evaluate different types of fabrication techniques to generate CNTs and their subsequent sensing Discusses fabrication of low-cost, efficient CNTs-based sensors that can be used for diverse applications and sheds light on synthesis methods for a range of printing techniques Highlights challenges and advances in security-related issues using CNTs-based sensors This book is aimed at researchers in the fields of materials and electrical engineering who are interested in the development of sensor technology for industrial, biomedical, and related applications.
This book explores the potential of multi-functional carbon nanotubes for biomedical applications. It combines contributions from chemistry, physics, biology, engineering, and medicine. The complete overview of the state-of-the-art addresses different synthesis and biofunctionalisation routes and shows the structural and magnetic properties of nanotubes relevant to biomedical applications. Particular emphasis is put on the interaction of carbon nanotubes with biological environments, i.e. toxicity, biocompatibility, cellular uptake, intracellular distribution, interaction with the immune system and environmental impact. The insertion of NMR-active substances allows diagnostic usage as markers and sensors, e.g. for imaging and contactless local temperature sensing. The potential of nanotubes for therapeutic applications is highlighted by studies on chemotherapeutic drug filling and release, targeting and magnetic hyperthermia studies for anti-cancer treatment at the cellular level.
Recent advancements and research in nanotechnology, biotechnology, materials engineering the applications of nanomaterial are evolving. Carbon nanotubes (CNT) and CNT-based systems possess unique chemical, physical, and biological properties that make them good candidates in biomedical applications, but they also have some inherent properties that cause great concern about their biosafety. This volume explores the practical applications of carbon nanotubes in biomedical science and human health. It discusses the synthesis, properties, modification, and recent progress of carbon nanotubes and their applications for biosensing, cancer treatment, antibacterial therapy, tissue engineering, targeted drug delivery, and toxicity. It relays the potential and promise of carbon-based nanomaterials for host of applications while also looking at the challenges in synthesis, characterization, and applications of nanomaterials and how to overcome them.
This Handbook covers the fundamentals of carbon nanotubes (CNT), their composites with different polymeric materials (both natural and synthetic) and their potential advanced applications. Three different parts dedicated to each of these aspects are provided, with chapters written by worldwide experts in the field. It provides in-depth information about this material serving as a reference book for a broad range of scientists, industrial practitioners, graduate and undergraduate students, and other professionals in the fields of polymer science and engineering, materials science, surface science, bioengineering and chemical engineering. Part 1 comprises 22 chapters covering early stages of the development of CNT, synthesis techniques, growth mechanism, the physics and chemistry of CNT, various innovative characterization techniques, the need of functionalization and different types of functionalization methods as well as the different properties of CNT. A full chapter is devoted to theory and simulation aspects. Moreover, it pursues a significant amount of work on life cycle analysis of CNT and toxicity aspects. Part 2 covers CNT-based polymer nanocomposites in approximately 23 chapters. It starts with a short introduction about polymer nanocomposites with special emphasis on CNT-based polymer nanocomposites, different manufacturing techniques as well as critical issues concerning CNT-based polymer nanocomposites. The text deeply reviews various classes of polymers like thermoset, elastomer, latex, amorphous thermoplastic, crystalline thermoplastic and polymer fibers used to prepare CNT based polymer composites. It provides detailed awareness about the characterization of polymer composites. The morphological, rheological, mechanical, viscoelastic, thermal, electrical, electromagnetic shielding properties are discussed in detail. A chapter dedicated to the simulation and multiscale modelling of polymer nanocomposites is an additional attraction of this part of the Handbook. Part 3 covers various potential applications of CNT in approximately 27 chapters. It focuses on individual applications of CNT including mechanical applications, energy conversion and storage applications, fuel cells and water splitting, solar cells and photovoltaics, sensing applications, nanofluidics, nanoelectronics and microelectronic devices, nano-optics, nanophotonics and nano-optoelectronics, non-linear optical applications, piezo electric applications, agriculture applications, biomedical applications, thermal materials, environmental remediation applications, anti-microbial and antibacterial properties and other miscellaneous applications and multi-functional applications of CNT based polymer nanocomposites. One chapter is fully focussed on carbon nanotube research developments: published papers and patents. Risks associated with carbon nanotubes and competitive analysis of carbon nanotubes with other carbon allotropes are also addressed in this Handbook.
Carbon is present in nature in a variety of allotropes and chemical compounds. Due to reduced dimensionality, nanostructured carbon materials, i.e. single walled carbon nanotubes (SWNTs), are characterized by unique physical and chemical properties. There is a potential for SWNTs use as biological probes and assists for tunable tissue growth in biomedical applications. However, the presumed cytotoxicity of SWNTs requires investigation of the risks of their incorporation into living systems. Boron is not found in nature in elementary form. Boron based materials are chemically complex and exist in various polymorphic forms, i.e. boron carbide (BC). Because BC is a lightweight material with exceptional mechanical and elastic properties, it is the ideal candidate for armor and ballistic applications. However, practical use of BC as armor material is limited because of its anomalous glass-like behaviour at high velocity impacts, which has been linked to stress-induced structural instability in one of BC polymorphs, B12(CCC). Theoretical calculations suggest that formation of B12(CCC) in BC could be suppressed by silicon doping. In the first part of this thesis, biocompatibility of SWNTs is investigated. It is shown that under normal cell implantation conditions, the electrical conductivity of the SWNTs decreases due to an increase in structural disorder. This research suggests that SWNTs can be functionalized by protein and biological cells reducing the risk of cytotoxicity. In the second part of this thesis, boron carbide nanostructured materials are synthesized and investigated. Radio frequency sputtering deposition technique is employed for fabrication of BC (Si free) and BC:Si thin films. Variation of plasma conditions and temperature are found to affect chemical composition, adhesion to the substrate and morphology of the films. It is shown that BC films are predominantly amorphous and a small addition of Si largely improves their mechanical properties. In addition, nanostructured BC compounds are fabricated by arc discharge technique using graphite or boron carbide electrodes submerged in liquid nitrogen, de-ionised water, or argon gas. Microscopic and spectroscopic investigation of the synthesized material confirms formation of various BC and carbon nanostructures. Specifically, arc discharge initiated in inert environment by applying low current leads to the formation of nanostructured BC without contaminants.
Since their discovery more than a decade ago, carbon nanotubes (CNTs) have held scientists and engineers in captive fascination, seated on the verge of enormous breakthroughs in areas such as medicine, electronics, and materials science, to name but a few. Taking a broad look at CNTs and the tools used to study them, Carbon Nanotubes: Properties and Applications comprises the efforts of leading nanotube researchers led by Michael O’Connell, protégé of the late father of nanotechnology, Richard Smalley. Each chapter is a self-contained treatise on various aspects of CNT synthesis, characterization, modification, and applications. The book opens with a general introduction to the basic characteristics and the history of CNTs, followed by discussions on synthesis methods and the growth of “peapod” structures. Coverage then moves to electronic properties and band structures of single-wall nanotubes (SWNTs), magnetic properties, Raman spectroscopy of electronic and chemical behavior, and electromechanical properties and applications in NEMS (nanoelectromechanical systems). Turning to applications, the final sections of the book explore mechanical properties of SWNTs spun into fibers, sidewall functionalization in composites, and using SWNTs as tips for scanning probe microscopes. Taking a fresh look at this burgeoning field, Carbon Nanotubes: Properties and Applications points the way toward making CNTs commercially viable.
FUNCTIONALIZED CARBON NANOTUBES FOR BIOMEDICAL APPLICATIONS The book highlights established research and technology on current and emerging trends and biomedical applications of functionalized carbon nanotubes by providing academic researchers and scientists in industry, as well as high-tech start-ups, with knowledge of the modern practices that will revolutionize using functionalized carbon nanotubes. Nanotechnology suggests fascinating opportunities for a variety of applications in biomedical fields, including bioimaging and targeted delivery of biomacromolecules into cells. Numerous strategies have been recommended to functionalize carbon nanotubes with raised solubility for efficient use in biomedical applications. Functionalized carbon nanotubes have unique arrangements and extravagant mechanical, thermal, magnetic, optical, electrical, surface, and chemical properties, and the combination of these features gives them widespread biomedical applications. Functionalized carbon nanotubes are relatively flexible and interact with the cell membranes and penetrate different biological tissues owing to a “snaking” effect, therefore both the pharmacological and toxicological profiles of functionalized carbon nanotubes have gathered much attention in recent times. This book covers a broad range of topics relating to carbon nanotubes, from synthesis and functionalization to applications in advanced biomedical devices and systems. As they possess unique and attractive physical, chemical, optical, and even magnetic properties for various applications, considerable effort has been made to employ functionalized carbon nanotubes as new materials for the development of novel biomedical tools, such as diagnostic sensors, imaging agents, and drug/gene delivery systems for both diagnostics and clinical treatment. Audience The book is intended for a very broad audience of researchers and scientists working in the fields of nanomaterials, nanomedicine, bioinspired nanomaterials, nanotechnology, and biomedical application of nanomaterials.
""Carbon Nanotube-Based Sensors" highlights the latest research and developments on carbon nanotubes (CNTs) and their applications in sensors and sensing systems. It offers an overview of CNTs, including their synthesis, functionalization, characterization, and toxicology. It then delves into the fabrication and various applications of CNT-based sensors. This book is aimed at researchers in the fields of materials and electrical engineering who are interested in the development of sensor technology for industrial, biomedical, and related applications"--