Download Free Evaluation Of Post Tension Strengthened Steel Girder Bridge Using Frp Bars Book in PDF and EPUB Free Download. You can read online Evaluation Of Post Tension Strengthened Steel Girder Bridge Using Frp Bars and write the review.

Many state, county, and local agencies are faced with deteriorating bridge infrastructure composed of a large percentage of relatively short to medium span bridges. In many cases, these older structures are rolled or welded longitudinal steel stringers acting compositely with a reinforced concrete deck. Most of these bridges, although still in service, need some level of strengthening due to increases in legal live loads or loss of capacity due to deterioration. Although these bridges are overstressed in most instances, they do not warrant replacement; thus, structurally efficient but cost-effective means of strengthening needs to be employed. In the past, the use of bolted steel cover plates or angles was a common retrofit option for strengthening such bridges. However, the time and labor involved to attach such a strengthening system can sometimes be prohibitive. This project was funded through the Federal Highway Administration's Innovative Bridge Research and Construction program. The goal is to retrofit an existing structurally deficient, three-span continuous steel stringer bridge using an innovative technique that involves the application of post-tensioning forces; the post-tensioning forces were applied using fiber reinforced polymer post-tensioning bars. When compared to other strengthening methods, the use of carbon fiber reinforced polymer composite materials is very appealing in that they are highly resistant to corrosion, have a low weight, and have a high tensile strength. Before the post-tensioning system was installed, a diagnostic load test was conducted on the subject bridge to establish a baseline behavior of the unstrengthened bridge. During the process of installing the post-tensioning hardware and stressing the system, both the bridge and the post-tensioning system were monitored. The installation of the hardware was followed by a follow-up diagnostic load test to assess the effectiveness of the post-tensioning strengthening system. Additional load tests were performed over a period of two years to identify any changes in the strengthening system with time. Laboratory testing of several typical carbon fiber reinforced polymer bar specimens was also conducted to more thoroughly understand their behavior. This report documents the design, installation, and field testing of the strengthening system and bridge.
The use of fiber-reinforced polymer (FRP) composite materials has had a dramatic impact on civil engineering techniques over the past three decades. FRPs are an ideal material for structural applications where high strength-to-weight and stiffness-to-weight ratios are required. Developments in fiber-reinforced polymer (FRP) composites for civil engineering outlines the latest developments in fiber-reinforced polymer (FRP) composites and their applications in civil engineering.Part one outlines the general developments of fiber-reinforced polymer (FRP) use, reviewing recent advancements in the design and processing techniques of composite materials. Part two outlines particular types of fiber-reinforced polymers and covers their use in a wide range of civil engineering and structural applications, including their use in disaster-resistant buildings, strengthening steel structures and bridge superstructures.With its distinguished editor and international team of contributors, Developments in fiber-reinforced polymer (FRP) composites for civil engineering is an essential text for researchers and engineers in the field of civil engineering and industries such as bridge and building construction. - Outlines the latest developments in fiber-reinforced polymer composites and their applications in civil engineering - Reviews recent advancements in the design and processing techniques of composite materials - Covers the use of particular types of fiber-reinforced polymers in a wide range of civil engineering and structural applications
The repair of deteriorated, damaged and substandard civil infrastructures has become one of the most important issues for the civil engineer worldwide. This important book discusses the use of externally-bonded fibre-reinforced polymer (FRP) composites to strengthen, rehabilitate and retrofit civil engineering structures, covering such aspects as material behaviour, structural design and quality assurance.The first three chapters of the book review structurally-deficient civil engineering infrastructure, including concrete, metallic, masonry and timber structures. FRP composites used in rehabilitation and surface preparation of the component materials are also reviewed. The next four chapters deal with the design of FRP systems for the flexural and shear strengthening of reinforced concrete (RC) beams and the strengthening of RC columns. The following two chapters examine the strengthening of metallic and masonry structures with FRP composites. The last four chapters of the book are devoted to practical considerations in the flexural strengthening of beams with unstressed and prestressed FRP plates, durability of externally bonded FRP composite systems, quality assurance and control, maintenance, repair, and case studies.With its distinguished editors and international team of contributors, Strengthening and rehabilitation of civil infrastructures using fibre-reinforced polymer (FRP) composites is a valuable reference guide for engineers, scientists and technical personnel in civil and structural engineering working on the rehabilitation and strengthening of the civil infrastructure. - Reviews the use of fibre-reinforced polymer (FRP) composites in structurally damaged and sub-standard civil engineering structures - Examines the role and benefits of fibre-reinforced polymer (FRP) composites in different types of structures such as masonry and metallic strengthening - Covers practical considerations including material behaviour, structural design and quality assurance
This book presents a detailed study of the flexural strengthening of reinforced and prestressed concrete members using fibre reinforced polymer composite plates. The authors also discuss plate bonding onto other engineering materials such as steel and cast iron. The book has been designed for practising civil and structural engineers seeking to understand the principles and design technology of plate bonding, and for final year undergraduates and postgraduate engineers studying the principles of highway and bridge engineering and structural engineering.
Relevant advances have been accomplished by the scientific community and engineering profession in the design, assessment, monitoring, maintenance, and management of sustainable and resilient bridge structures and infrastructures. These advances have been presented and discussed at The Sixth International Conference on Bridge Maintenance, Safety And Management (IABMAS 2012), held in Stresa, Italy, from 8 to 11 July 2012 (http://www.iabmas2012.org). IABMAS 2012 has been organised on behalf of the International Association for Bridge Maintenance And Safety (IABMAS) under the auspices of Politecnico di Milano. This book collects the extended versions of selected papers presented at IABMAS 2012 and invited papers originally published in a Special Issue of Structure and Infrastructure Engineering. These papers provide significant contributions to the process of making more rational decisions in bridge design, assessment, monitoring and maintenance. The editors would like to thank the authors for their contributions and hope that this collection of papers will represent a valuable reference for scientific research and engineering applications in the fields of design, assessment, monitoring, and maintenance of bridges and infrastructure networks.