Download Free Evaluation Findings Of The All Sign Products Inc Polycarbonate Stop Sign Book in PDF and EPUB Free Download. You can read online Evaluation Findings Of The All Sign Products Inc Polycarbonate Stop Sign and write the review.

Prepared by the Highway Innovative Technology Evaluation Center, a CERF Service Center. This report presents the HITEC evaluation of a plastic stop sign manufactured by ALL SIGN Products, Inc. The evaluations of the ALL SIGN Polycarbonate Stop SignØinclude the results of a series of laboratoryØand field tests and an analytical evaluation.ØThe evaluation tested the product's retroreflectivity, color, and appearance under normal conditions and the effects of weathering and graffiti.
Prepared by the Highway Innovative Technology Evaluation Center, a CERF service center. This report presents the results of a HITEC evaluation of the Isogrid Retaining Wall System, designed and developed by the Neel Company. The report describes the basic capabilities and limitations of the Isogrid System for use as a technically viable precast, mechanically stabilized earth retaining wall system. The evaluation was conducted based on material, design, construction, performance, and quality assurance information outlined in the HITEC Protocol. The Isogrid System features a diamond-shaped, segmental precast concrete facing panel with weep holes where four panels intersect and welded wire, grid-type soil reinforcement attached to the center of each facing panel.
Prepared by the Environmental Technology Evaluation Center (EvTEC) and the Highway Innovative Technology Evaluation Center (HITEC), CERF Service Centers. This report provides an update on technology and is intended to assist the Federal Highway Administration's Priority Technology Program (PTP) and departments of transportation in all 50 states. It identifies barriers that hinder the widespread use of bioremediation in the highway environment, as well as methods to overcome these barriers. The evaluation is based on design, construction, performance, and quality assurance information outlined in the HITEC and EvTEC Protocols. The three case studies examine PTP projects in Alabama, Indiana, and Mississippi.
Prepared by the Environmental Technology Evaluation Center (EvTEC), a service center of CERF/IIEC. This Technology Verification report describes the nature and scope of the environmental evaluation of the performance of the Plasma Enhanced Melter? (PEM?) system for waste treatment. The evaluation was conducted through a cooperative program established in 1998 between the Washington State Department of Ecology, Integrated Environmental Technology Inc., Allied Technology Group, and the Civil Engineering Research Foundation. The goal of this report is to provide potential users and purchasers of the PEM? system with information they need to make more informed decisions regarding the performance of PEM? as an equivalent or alternative to incineration for treating hazardous waste.
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF/IIEC Innovation Center. This report describes a HITEC evaluation designed to determine the basic capabilities and limitations of the INTER-LOK System for use as a technically viable, precast mechanically stabilized earth retaining wall system. The evaluation was conducted based on design, construction, performance, and quality assurance information outlined in the HITEC Protocol. The INTER-LOK System features a cross-shaped, segmental precast concrete facing panel connected to metallic rebar and anchor plate type of soil reinforcement attached to the facing panels by a keyplate that interlocks with the facing panels.
Prepared by the Environmental Technology Evaluation Center (EvTEC), a CERF Service Center. This report describes the nature and scope of an environmental evaluation of ThermoEnergy Corporation's Ammonia Recovery Process (ARP) System, a method for recycling ammonia in wastewater. The data in this report were collected over a three-month pilot study.ØTests found that the ARP system is capable of removing 75?99% of the ammonia in the waste stream in a domestic wastewater treatment plant. The ARP System uses a series of absorption, evaporation, and crystallization steps to convert ammonia in wastewater into a commercial fertilizer, ammonium sulfate. The evaluation results clearly indicate that the ARP process is capable of achieving significant ammonia reduction under a range of environmental conditions
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Innovation Center. This report describes an evaluation to determine the capabilities and limitations of the KeySystem I Retaining Wall System, a mechanically stabilized earthØstructure developed, designed, and supplied by Keystone Retaining Wall Systems, Inc. The evaluation was conducted based on design, construction, performance, and quality assurance information outlined in the HITEC Protocol. KeySystem I features modular block facing to which KeyStrips are attached. KeyStrips are structural welded wire, grid-type reinforcement produced from high-strength steel.
Prepared by the Highway Innovative Technology Evaluation Center, a CERF/IIEC Innovation Center. This report describes a HITEC evaluation designed to determine the basic capabilities and limitations of the Tricon System for use as a technically viable, precast, mechanically stabilized earth-retaining wall system. The evaluation considered material, design, construction, performance, and quality assurance information outlined in the HITEC Protocol.
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF/IIEC Innovation Center. This report describes a HITEC evaluation designed to determine the basic capabilities and limitations of the Terramesh Retaining Wall System for use as a technically viable, mechanically stabilized earth, retaining wall system. The evaluation was conducted based on material, design, construction, performance, and quality assurance mainformation outlined in the HITEC Protocol. The Terramesh System, supplied by Maccaferri, Inc.,Øfeatures a Gabion basket facing of various configurations and metal double-twisted grid type of soil reinforcement, which is manufactured integrally with the basket facing blocks.
Prepared by the Civil Engineering Innovative Technology Evaluation Center, a CERF innovation center serving the engineering and construction industries. This report presents a CEITEC evaluation of the Trevipark automated parking system, which was developed, designed, and supplied by TREVI S.p.A., of Cesena, Italy. The evaluation is designed to determine the benefits and limitations of Trevipark for use as a technically viable automated vehicle parking system. The evaluation focused on data collection, site inspections, and analyses. The Trevipark system consists of a cylindrical enclosure with a central elevator system to park and store vehicles in a radial pattern. This proprietary system is intended to provide safe and secure parking for lower cost, smaller site and space requirements, less retrieval time, and other advantages.