Download Free Engine Thermal Management In Heavy Duty Vehicles Book in PDF and EPUB Free Download. You can read online Engine Thermal Management In Heavy Duty Vehicles and write the review.

This handbook deals with the vast subject of thermal management of engines and vehicles by applying the state of the art research to diesel and natural gas engines. The contributions from global experts focus on management, generation, and retention of heat in after-treatment and exhaust systems for light-off of NOx, PM, and PN catalysts during cold start and city cycles as well as operation at ultralow temperatures. This book will be of great interest to those in academia and industry involved in the design and development of advanced diesel and CNG engines satisfying the current and future emission standards.
Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.
The efficiency of thermal systems (HVAC, engine cooling, transmission, and power steering) has improved greatly over the past few years. Operating these systems typically requires a significant amount of energy, however, which could adversely affect vehicle performance. To provide customers the level of comfort that they demand in an energy-efficient manner, innovative approaches must be developed. Vehicle Thermal Management: Heat Exchangers & Climate Control is an essential resource for engineers and designers working on thermal systems, presenting the most recent and relevant technical papers that focus on this important vehicle component. Chapters include: Heating and Air Conditioning Engine Cooling Underhood Thermal Environment Heat Transfer in Engines Heat Exchangers New Technologies
This book contains the papers presented at the IMechE and SAE International, Vehicle Thermal Management Systems Conference (VTMS10), held at the Heritage Motor Centre, Gaydon, Warwickshire, 15-19th May 2011. VTMS10 is an international conference organised by the Automobile Division and the Combustion Engines and Fuels Group of the IMechE and SAE International. The event is aimed at anyone involved with vehicle heat transfer, members of the OEM, tier one suppliers, component and software suppliers, consultants, and academics interested in all areas of thermal energy management in vehicles. This vibrant conference, the tenth VTMS, addresses the latest analytical and development tools and techniques, with sessions on: alternative powertrain, emissions, engines, heat exchange/manufacture, heating, A/C, comfort, underhood, and external/internal component flows. It covers the latest in research and technological advances in the field of heat transfer, energy management, comfort and the efficient management of all thermal systems within the vehicle. - Aimed at anyone working in or involved with vehicle heat transfer - Covers research and technological advances in heat transfer, energy management, comfort and efficient management of thermal systems within the vehicle
With new and more stringent standards addressing emission reduction and fuel economy, the importance of a well-developed engine thermal management system becomes even greater. With about 30% of the fuel intake energy dissipated through the cooling system and another 30% through the exhaust system, it is to be expected that serious research has been dedicated to this field. Thermal Management in Automotive Applications, edited by Dr. T. Yomi Obidi, brings together a focused collection of SAE technical papers on the subject. It offers insights into how thermal management impacts the efficiency of engines in heavy vehicles, the effects of better coolant flow control, and the use of smart thermostat and next-generation cooling pumps. It also provides an in-depth analysis of the possible gains in optimum warm-up sequence and thermal management on a small gasoline engine. With continuously increasing gadgetry in modern vehicles, the average temperature in the engine compartment has seen significant increase. It is important to be able to divert the heat away from passengers as well as from some components that may be negatively impacted by excessive temperatures. Thermal Management in Automotive Applications points out solutions to this challenge, including material and design options.
The 21st Century Truck Partnership (21CTP), a cooperative research and development partnership formed by four federal agencies with 15 industrial partners, was launched in the year 2000 with high hopes that it would dramatically advance the technologies used in trucks and buses, yielding a cleaner, safer, more efficient generation of vehicles. Review of the 21st Century Truck Partnership critically examines and comments on the overall adequacy and balance of the 21CTP. The book reviews how well the program has accomplished its goals, evaluates progress in the program, and makes recommendations to improve the likelihood of the Partnership meeting its goals. Key recommendations of the book include that the 21CTP should be continued, but the future program should be revised and better balanced. A clearer goal setting strategy should be developed, and the goals should be clearly stated in measurable engineering terms and reviewed periodically so as to be based on the available funds.
THERMAL ENERGY MANAGEMENT IN VEHICLES Comprehensive coverage of thermal energy management systems and components in vehicles In Thermal Energy Management in Vehicles, a team of distinguished researchers delivers a robust and authoritative account of thermal energy management systems and components in vehicles. Covering three main areas—the thermal management of internal combustion engines, mobile air-conditioning, and thermal management of hybrid electric vehicles and electric vehicles—the book discusses and proposes simulation models for many of the components and systems introduced in the book. The authors also cover state-of-the-art and emerging technologies, as well as likely future industry trends, and offer an accompanying website with supplementary materials like downloadable models. Readers will also find: Material that bridges the gap between academia and industry Proposed simulation models for vehicular components and systems Fulsome discussions of industry trends likely to take hold in the near future Accompanying online resources, including downloadable simulation models, on a complimentary website Perfect for researchers, graduate students, and practitioners in automotive engineering, Thermal Energy Management in Vehicles will also benefit anyone seeking a comprehensive treatment of vehicular thermal energy management systems and components.
Alternative Fuels and Advanced Vehicle Technologies for Improved Environmental Performance: Towards Zero Carbon Transportation, Second Edition provides a comprehensive view of key developments in advanced fuels and vehicle technologies to improve the energy efficiency and environmental impact of the automotive sector. Sections consider the role of alternative fuels such as electricity, alcohol and hydrogen fuel cells, as well as advanced additives and oils in environmentally sustainable transport. Other topics explored include methods of revising engine and vehicle design to improve environmental performance and fuel economy and developments in electric and hybrid vehicle technologies. This reference will provide professionals, engineers and researchers of alternative fuels with an understanding of the latest clean technologies which will help them to advance the field. Those working in environmental and mechanical engineering will benefit from the detailed analysis of the technologies covered, as will fuel suppliers and energy producers seeking to improve the efficiency, sustainability and accessibility of their work. - Provides a fully updated reference with significant technological advances and developments in the sector - Presents analyses on the latest advances in electronic systems for emissions control, autonomous systems, artificial intelligence and legislative requirements - Includes a strong focus on updated climate change predictions and consequences, helping the reader work towards ambitious 2050 climate change goals for the automotive industry
The volumes includes selected and reviewed papers from the 1st ETA Conference on Energy and Thermal Management, Air Conditioning and Waste Heat Recovery in Berlin, December 1-2, 2016. Experts from university, public authorities and industry discuss the latest technological developments and applications for energy efficiency. Main focus is on automotive industry, rail and aerospace.