Download Free Development Of A Twin Spool Turbofan Engine Simulation Using The Toolbox For The Modeling And Analysis Of Thermodynamic Systems T Mats Book in PDF and EPUB Free Download. You can read online Development Of A Twin Spool Turbofan Engine Simulation Using The Toolbox For The Modeling And Analysis Of Thermodynamic Systems T Mats and write the review.

This book is a compilation of peer-reviewed papers from the 2018 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2018). The symposium is a common endeavour between the four national aerospace societies in China, Australia, Korea and Japan, namely, the Chinese Society of Aeronautics and Astronautics (CSAA), Royal Aeronautical Society Australian Division (RAeS Australian Division), the Korean Society for Aeronautical and Space Sciences (KSAS) and the Japan Society for Aeronautical and Space Sciences (JSASS). APISAT is an annual event initiated in 2009 to provide an opportunity for researchers and engineers from Asia-Pacific countries to discuss current and future advanced topics in aeronautical and space engineering.
This book presents new studies in the area of turbomachine mathematical modeling with a focus on models applied to developing engine control and diagnostic systems. The book contains one introductory and four main chapters. The introductory chapter describes the area of modeling of gas and wind turbines and shows the demand for further improvement of the models. The first three main chapters offer particular improvements in gas turbine modeling. First, a novel methodology for the modeling of engine starting is presented. Second, a thorough theoretical comparative analysis is performed for the models of engine internal gas capacities, and practical recommendations are given on model applications, in particular for engine control purposes. Third, multiple algorithms for calculating important unmeasured parameters for engine diagnostics are proposed and compared. It is proven that the best algorithms allow accurate prognosis of engine remaining lifetime.The field of wind turbine modeling is presented in the last main chapter. It introduces a general-purpose model that describes both aerodynamic and electric parts of a wind power plant. Such a detailed physics-based model will help with the development of more accurate control and diagnostic systems.In this way, this book includes four new studies in the area of gas and wind turbine modeling. These studies will be interesting and useful for specialists in turbine engine control and diagnostics.
Model-based diagnostic/prognostic techniques have the potential to predict, within reasonable bounds, the remaining useful life of critical system components. Due to the numerous uncertainties in the operation of a turbine engine and unavailability of accurate engine models, prognostics continue to pose a significant challenge. There is a need to develop an engine prognostic approach that can accommodate different damage modes, sensor failures, material properties, dynamic load histories and damage accumulation. Using an accurate physics-based model of the engine one can develop such a prognostic approach. We present a nonlinear dynamical model of a two-spool turbine engine developed from first principles. The simulation model has been implemented using MATLAB/Simulink. It is used with the Kalman Filter-based diagnostic technique previously discussed in literature to detect and isolate sensor faults. A literature review of the developments in the area of prognostics is also presented, along with the problems and challenges.
A nonlinear analog simulation of a turbojet engine was developed. The purpose of the study was to establish simulation techniques applicable to propulsion system dynamics and controls research. A schematic model was derived from a physical description of a J85-13 turbojet engine. Basic conservation equations were applied to each component along with their individual performance characteristics to derive a mathematical representation. The simulation was mechanized on an analog computer. The simulation was verified in both steady-state and dynamic modes by comparing analytical results with experimental data obtained from tests performed at the Lewis Research Center with a J85-13 engine. In addition, comparison was also made with performance data obtained from the engine manufacturer. The comparisons established the validity of the simulation technique.
This paper presents the development of a generic component level model of a turbofan engine simulation with a digital controller, in an advanced graphical simulation environment. The goal of this effort is to develop and demonstrate a flexible simulation platform for future research in propulsion system control and diagnostic technology. A previously validated FORTRAN-based model of a modern, high-performance, military-type turbofan engine is being used to validate the platform development. The implementation process required the development of various innovative procedures, which are discussed in the paper. Open-loop and closed-loop comparisons are made between the two simulations. Future enhancements that are to be made to the modular engine simulation are summarized. Parker, Khary I. and Guo, Ten-Heui Glenn Research Center NASA/TM-2003-212543, E-14109, NAS 1.15:212543
A dynamic, high-bypass turbofan engine has been developed in the modeling and simulation environment of MATLAB/Simulink. Individual elements, including the fan, high pressure compressor, combustor, high pressure turbine, low pressure turbine, plenum volumes, and exit nozzle, have been combined to investigate the behavior of a typical turbofan engine throughout an aircraft mission. Special attention has been paid to the development of transient capabilities throughout the model, increasing model fidelity, eliminating algebraic constraints, and reducing simulation time through the use of advanced numerical solvers. This lessening of computation times is paramount for conducting future aircraft system-level design trade studies efficiently, as demonstrated in previous thermal “Tip-to-Tail” modeling of a long range strike platform. The new engine model is run for a specified mission while tracking critical parameters. These results, as well as the simulation times for both engine models, are compared to the previous “Tip-to-Tail” engine to verify accuracy and quantify computational time improvements. The new engine model is then integrated with the full “Tip-to-Tail” aircraft model. This new model is compared to the previous “Tip-to-Tail” aircraft model to confirm accuracy and quantify computational time improvements. The new “Tip-to-Tail” aircraft model is then used for a simple design trade study of a critical component of the cooling system.
A Zero-D cycle simulation of the GE90-94B high bypass turbofan engine has been achieved utilizing mini-maps generated from a high-fidelity simulation. The simulation utilizes the Numerical Propulsion System Simulation (NPSS) thermodynamic cycle modeling system coupled to a high-fidelity full-engine model represented by a set of coupled 3D computational fluid dynamic (CFD) component models. Boundary conditions from the balanced, steady state cycle model are used to define component boundary conditions in the full-engine model. Operating characteristics of the 3D component models are integrated into the cycle model via partial performance maps generated from the CFD flow solutions using one-dimensional mean line turbomachinery programs. This paper highlights the generation of the high-pressure compressor, booster, and fan partial performance maps, as well as turbine maps for the high pressure and low pressure turbine. These are actually "mini-maps" in the sense that they are developed only for a narrow operating range of the component. Results are compared between actual cycle data at a take-off condition and the comparable condition utilizing these mini-maps. The mini-maps are also presented with comparison to actual component data where possible.
A Zero-D cycle simulation of the GE90-94B high bypass turbofan engine has been achieved utilizing mini-maps generated from a high-fidelity simulation. The simulation utilizes the Numerical Propulsion System Simulation (NPSS) thermodynamic cycle modeling system coupled to a high-fidelity full-engine model represented by a set of coupled 3D computational fluid dynamic (CFD) component models. Boundary conditions from the balanced, steady state cycle model are used to define component boundary conditions in the full-engine model. Operating characteristics of the 3D component models are integrated into the cycle model via partial performance maps generated from the CFD flow solutions using one-dimensional mean line turbomachinery programs. This paper highlights the generation of the high-pressure compressor, booster, and fan partial performance maps, as well as turbine maps for the high pressure and low pressure turbine. These are actually "mini-maps" in the sense that they are developed only for a narrow operating range of the component. Results are compared between actual cycle data at a take-off condition and the comparable condition utilizing these mini-maps. The mini-maps are also presented with comparison to actual component data where possible. Turner, Mark G. and Reed, John A. and Ryder, Robert and Veres, Joseph P. Glenn Research Center NASA/TM-2004-213076, GT2004-53956, E-14551