Download Free Control And Nonlinear Dynamics On Energy Conversion Systems Book in PDF and EPUB Free Download. You can read online Control And Nonlinear Dynamics On Energy Conversion Systems and write the review.

The ever-increasing need for higher efficiency, smaller size, and lower cost make the analysis, understanding, and design of energy conversion systems extremely important, interesting, and even imperative. One of the most neglected features in the study of such systems is the effect of the inherent nonlinearities on the stability of the system. Due to these nonlinearities, these devices may exhibit undesirable and complex dynamics, which are the focus of many researchers. Even though a lot of research has taken place in this area during the last 20 years, it is still an active research topic for mainstream power engineers. This research has demonstrated that these systems can become unstable with a direct result in increased losses, extra subharmonics, and even uncontrollability/unobservability. The detailed study of these systems can help in the design of smaller, lighter, and less expensive converters that are particularly important in emerging areas of research like electric vehicles, smart grids, renewable energy sources, and others. The aim of this Special Issue is to cover control and nonlinear aspects of instabilities in different energy conversion systems: theoretical, analysis modelling, and practical solutions for such emerging applications. In this Special Issue, we present novel research works in different areas of the control and nonlinear dynamics of energy conversion systems.
The ever-increasing need for higher efficiency, smaller size, and lower cost make the analysis, understanding, and design of energy conversion systems extremely important, interesting, and even imperative. One of the most neglected features in the study of such systems is the effect of the inherent nonlinearities on the stability of the system. Due to these nonlinearities, these devices may exhibit undesirable and complex dynamics, which are the focus of many researchers. Even though a lot of research has taken place in this area during the last 20 years, it is still an active research topic for mainstream power engineers. This research has demonstrated that these systems can become unstable with a direct result in increased losses, extra subharmonics, and even uncontrollability/unobservability. The detailed study of these systems can help in the design of smaller, lighter, and less expensive converters that are particularly important in emerging areas of research like electric vehicles, smart grids, renewable energy sources, and others. The aim of this Special Issue is to cover control and nonlinear aspects of instabilities in different energy conversion systems: theoretical, analysis modelling, and practical solutions for such emerging applications. In this Special Issue, we present novel research works in different areas of the control and nonlinear dynamics of energy conversion systems.
Renewable Energy Systems: Modelling, Optimization and Control aims to cross-pollinate recent advances in the study of renewable energy control systems by bringing together diverse scientific breakthroughs on the modeling, control and optimization of renewable energy systems by leading researchers. The book brings together the most comprehensive collection of modeling, control theorems and optimization techniques to help solve many scientific issues for researchers in renewable energy and control engineering. Many multidisciplinary applications are discussed, including new fundamentals, modeling, analysis, design, realization and experimental results. The book also covers new circuits and systems to help researchers solve many nonlinear problems. This book fills the gaps between different interdisciplinary applications, ranging from mathematical concepts, modeling, and analysis, up to the realization and experimental work. Covers modeling, control theorems and optimization techniques which will solve many scientific issues for researchers in renewable energy Discusses many multidisciplinary applications with new fundamentals, modeling, analysis, design, realization and experimental results Includes new circuits and systems, helping researchers solve many nonlinear problems
Backstepping Control of Nonlinear Dynamical Systems addresses both the fundamentals of backstepping control and advances in the field. The latest techniques explored include ‘active backstepping control’, ‘adaptive backstepping control’, ‘fuzzy backstepping control’ and ‘adaptive fuzzy backstepping control’. The reference book provides numerous simulations using MATLAB and circuit design. These illustrate the main results of theory and applications of backstepping control of nonlinear control systems. Backstepping control encompasses varied aspects of mechanical engineering and has many different applications within the field. For example, the book covers aspects related to robot manipulators, aircraft flight control systems, power systems, mechanical systems, biological systems and chaotic systems. This multifaceted view of subject areas means that this useful reference resource will be ideal for a large cross section of the mechanical engineering community. Details the real-world applications of backstepping control Gives an up-to-date insight into the theory, uses and application of backstepping control Bridges the gaps for different fields of engineering, including mechanical engineering, aeronautical engineering, electrical engineering, communications engineering, robotics and biomedical instrumentation
The variable gain control method is a new construction technique for the control of nonlinear systems. By properly conducting state transformation that depends on the variable gains, the control design problem of nonlinear systems can be transformed into a gain construction problem, thus effectively avoiding the tedious iterative design procedure. Different from the classical backstepping method and forwarding design method, the structure of variable gain control is simpler in the sense that fewer design parameters are required, facilitating the improvement of system control performance. To highlight the learning, research, and promotion of variable gain control, Variable Gain Control and Its Applications in Energy Conversion is written based on the research results of peers at home and abroad and combining our latest research. This book presents innovative technologies for designing variable gain controllers for nonlinear systems. It systematically describes the origin and principles of variable gain control for nonlinear systems, focuses on the controller design and stability analysis, and reflects the latest research. In addition, variable gain control methods applied to energy conversion are also included. Discussion remarks are provided in each chapter highlighting new approaches and contributions to emphasize the novelty of the presented design and analysis methods. In addition, simulation results are given in each chapter to show the effectiveness of these methods. It can be used as a reference book or a textbook for students with some background in feedback control systems. Researchers, graduate students, and engineers in the fields of control, information, renewable energy generation, electrical engineering, mechanical engineering, applied mathematics, and others will benefit from this book.
Design, Analysis and Applications of Renewable Energy Systems covers recent advancements in the study of renewable energy control systems by bringing together diverse scientific breakthroughs on the modeling, control and optimization of renewable energy systems as conveyed by leading energy systems engineering researchers. The book focuses on present novel solutions for many problems in the field, covering modeling, control theorems and the optimization techniques that will help solve many scientific issues for researchers. Multidisciplinary applications are also discussed, along with their fundamentals, modeling, analysis, design, realization and experimental results. This book fills the gaps between different interdisciplinary applications, ranging from mathematical concepts, modeling, and analysis, up to the realization and experimental work. Presents some of the latest innovative approaches to renewable energy systems from the point-of-view of dynamic modeling, system analysis, optimization, control and circuit design Focuses on advances related to optimization techniques for renewable energy and forecasting using machine learning methods Includes new circuits and systems, helping researchers solve many nonlinear problems
This book presents the recent research advances in linear and nonlinear control techniques. From both a theoretical and practical standpoint, motion planning and related control challenges are key parts of robotics. Indeed, the literature on the planning of geometric paths and the generation of time-based trajectories, while accounting for the compatibility of such paths and trajectories with the kinematic and dynamic constraints of a manipulator or a mobile vehicle, is extensive and rich in historical references. Path planning is vital and critical for many different types of robotics, including autonomous vehicles, multiple robots, and robot arms. In the case of multiple robot route planning, it is critical to produce a safe path that avoids colliding with objects or other robots. When designing a safe path for an aerial or underwater robot, the 3D environment must be considered. As the number of degrees of freedom on a robot arm increases, so does the difficulty of path planning. As a result, safe pathways for high-dimensional systems must be developed in a timely manner. Nonetheless, modern robotic applications, particularly those requiring one or more robots to operate in a dynamic environment (e.g., human–robot collaboration and physical interaction, surveillance, or exploration of unknown spaces with mobile agents, etc.), pose new and exciting challenges to researchers and practitioners. For instance, planning a robot's motion in a dynamic environment necessitates the real-time and online execution of difficult computational operations. The development of efficient solutions for such real-time computations, which could be offered by specially designed computational architectures, optimized algorithms, and other unique contributions, is thus a critical step in the advancement of present and future-oriented robotics.
Lovelock identified Newcomen’s atmospheric steam engine as the start of Anthropocene with these words: “...there have been two previous decisive events in the history of our planet. The first was ... when photosynthetic bacteria first appeared [conversing sunlight to usable energy]. The second was in 1712 when Newcomen created an efficient machine that converted the sunlight locked in coal directly into work.” This book is about the necessity of energy transition toward renewables that convert sunlight diurnally, thus a sustainable Anthropocene. Such an energy transition is equally momentous as that of the kick start of the second Industrial Revolution in 1712. Such an energy transition requires “it takes a village” collective effort of mankind; the book is a small part of the collective endeavor.