Download Free Construction Industry Research Prospectuses For The 21st Century Book in PDF and EPUB Free Download. You can read online Construction Industry Research Prospectuses For The 21st Century and write the review.

Presented at Engineering and Construction for Sustainable Development in the 21st Century, held in Washington, D.C., February 4-8, 1996. Sponsored by the Civil Engineering Research Foundation. This report presents 38 prospectuses developed by industry experts from more than 25 countries as part of an international collaborative agenda for the construction industry to advance innovation in support of sustainable development. The prospectuses, or proposed collaborative projects, identify challenges facing the engineering and construction industry and the problems associated with implementing innovative technologies. The prospectuses also recommend solutions to these challenges; detail the benefits of these solutions; identify proposed collaborative partners; and estimate the cost and schedule associated with implementing these projects.
Presents findings of an international symposium hosted by the Civil Engineering Research Foundation in Washington, DC, on February 4-8, 1996. This report identifies follow-up actions designed to strengthen international collaborative efforts to accelerate the introduction on innovative technologies and systems.
Prepared by the Civil Engineering Research Foundation This report presents a summary of some of the key characteristics of 27 leading construction industry technical approval/evaluation organizations in the world. The report is based on a survey of 37 different approval/evaluation organizations. A summary analysis for each organization includes tabular presentations showing key organization characteristics and two-page profiles. The discussion includes types of product or services, types of evaluation, reporting mechanisms, international relationships, responsibility/liability issues, and evaluation processes.
Prepared by the Environmental Technology Evaluation Center (EvTEC), a CERF Service Center. This report describes the nature and scope of an environmental evaluation of ThermoEnergy Corporation's Ammonia Recovery Process (ARP) System, a method for recycling ammonia in wastewater. The data in this report were collected over a three-month pilot study.ØTests found that the ARP system is capable of removing 75?99% of the ammonia in the waste stream in a domestic wastewater treatment plant. The ARP System uses a series of absorption, evaporation, and crystallization steps to convert ammonia in wastewater into a commercial fertilizer, ammonium sulfate. The evaluation results clearly indicate that the ARP process is capable of achieving significant ammonia reduction under a range of environmental conditions
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF service center. This report presents the results of a detailed evaluation ofØthe MX 30 pavement marking 30-meter retroreflectometer. The evaluation is designed to test the measurement bias, repeatability, and reproducibility of handheld and mobile retroreflectometers produced by several manufacturers.
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. his report summarizes the results of an evaluation that was designed to test the performance of 11 seismic isolators and dampers. The devices were tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF service center. This report describes a HITEC evaluation designed to determine the basic capabilities and limitations of the MSE Plus System, manufactured by SSL, LLC, for use as a mechanically stabilized earth retaining system. The evaluation was conducted based on material, design, construction, performance, and quality assurance information outlined in the HITEC Protocol. TheØMSE PlusØSystem features rectangular segmental precast concrete facing panels and galanized welded wire, grid-type soil reinforcement.
Prepared by the Partnership for Building Innovation of CERF. Sponsored by CERF; National Institute of Standards and Technology; U.S. Department of Housing and Urban Development; U.S. Department of Energy; U.S. Army Corps of Engineers. This report presents the results of a planning effort to enhance the entry of building innovation into the marketplace and outlines an action plan for an enhanced national evaluation process. This enhanced evaluation process to identify new building technology should have these characteristics: uses the best expertise targeted to the specific technology being evaluated; evaluates technology to other than code requirements; is recognized by the international community; uses advanced information technology; is utilized by public and private building owners; and can evaluate all types of technologies and systems.
Prepared by the Environmental Technology Evaluation Center (EvTEC), a CERF Service Center. This report presents the findings from a June 1997 Environmental Technology Needs Survey conducted by EvTEC. The survey was developed to help EvTEC gain a better understanding of present practices and procedures in evaluating new products and determine how EvTEC could best respond to the needs of all stakeholders in the environmental community. The survey contained general information questions as well as specialized questions for three groups: users and regulators of environmental products; entrepreneurs who invent, develop, or market new technologies and products; and research institutes and testing labs that carry out product and technology evaluations.
Prepared by CEITEC, a CERF innovation center serving the engineering and construction industries. This report describes an evaluation of Sewer Scanner and Evaluation Technology (SSET) designed to determine the basic capabilities and limitations of SSET for use as a technicallly viable technology for inspecting sewer pipes. The evaluation focused on the performance and in-service demonstration of SSET. The technology involves digital scanning to obtain a flat, "unfolded" image of the pipeline's interior. This evaluation includes field demonstrations performed at 13 municipal public works agencies throughout North America. Subsequent to this evaluation, SSET was modified to include a fisheye lens camera and fiber optic gyroscope, which replaced the rotating mechanical scanner and mechanical gyroscope. The evaluation confirmed the operability of SSET and its viability in data presentation. A degree of enhancement was recognized with additional features, most notably the ability to produce a digital report of the sewer pipe, to identify vertical deflection in pipes, and to deliver easily comprehensible and manageable results. The evaluation also revealed that SSET cannot reproduce all the features typically available from closed-circuit television (CCTV) inspection. Such features include the ability to clearly see corrosion, infiltration rates, and ovality. The limitations in applicability were determined and an economic comparison of SSET and CCTV is provided.