Download Free Cold Air Performance Of A 12766 Centimeter Tip Diameter Axial Flow Cooled Turbine 3 Book in PDF and EPUB Free Download. You can read online Cold Air Performance Of A 12766 Centimeter Tip Diameter Axial Flow Cooled Turbine 3 and write the review.

Two tip clearance configurations, one with a recess in the casing and the other with a reduced rotor blade height, were investigated at design equivalent speed over a range of tip clearance from about 2.0 to 5.0 percent of the stator blade height. The optimum configuration with a recess in the casing was the one where the rotor tip diameter was equal to the stator tip diameter (zero blade extension). For this configuration there was an approximate 1.5 percent decrease in total efficiency for an increase in tip clearance of 1 percent of stator blade height. For the reduced blade height configurations there was an approximate 2.0 percent decrease in total efficiency for an increase in tip clearance of 1 percent of stator blade height. Haas, J. E. and Kofskey, M. G. Glenn Research Center NASA-TP-1032, E-9181 RTOP 505-04
An air cooled version of a single-stage, axial-flow turbine was investigated to determine aerodynamic performance with and without air ejection from the stator and rotor blades surfaces to simulate the effect of cooling air discharge. Air ejection rate was varied from 0 to 10 percent of turbine mass flow for both the stator and the rotor. A primary-to-air ejection temperature ratio of about 1 was maintained. Haas, J. E. and Kofskey, M. G. Glenn Research Center NASA-TP-1018 RTOP 505-04...
Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.