Download Free Buildings And Structures Under Extreme Loads Ii Book in PDF and EPUB Free Download. You can read online Buildings And Structures Under Extreme Loads Ii and write the review.

Exceptional loads on buildings and structures may have different causes, including high-strain dynamic effects due to natural hazards, man-made attacks, and accidents, as well as extreme operational conditions (severe temperature variations, humidity, etc.). All of these aspects can be critical for specific structural typologies and/or materials that are particularly sensitive to external conditions. In this regard, dedicated and refined methods are required for their design, analysis, and maintenance under the expected lifetime. There are major challenges related to the structural typology and material properties with respect to the key features of the imposed design load. Further issues can be derived from the need for risk mitigation or retrofit of existing structures as well as from the optimal and safe design of innovative materials/systems. Finally, in some cases, no appropriate design recommendations are available and, thus, experimental investigations can have a key role within the overall process. In this Special Issue, original research studies, review papers, and experimental and/or numerical investigations are presented for the structural performance assessment of buildings and structures under various extreme conditions that are of interest for design.
Original research on performance of materials under a wide variety of blasts, impacts, severe loading and fireCritical information for protecting buildings and civil infrastructure against human attack, deterioration and natural disastersTest and design data for new types of concrete, steel and FRP materials This technical book is devoted to the empirical and theoretical analysis of how structures and the materials constituting them perform under the extreme conditions of explosions, fire, and impact. Each of the 119 fully refereed presentations is published here for the first time and was selected because of its original contribution to the science and engineering of how materials, bridges, buildings, tunnels and their components, such as beams and pre-stressed parts, respond to potentially destructive forces. Emphasis is placed on translating empirical data to design recommendations for strengthening structures, including strategies for fire and earthquake protection as well as blast mitigation. Technical details are provided on the development and behavior of new resistant materials, including reinforcements, especially for concrete, steel and their composites.
Sustainable Buildings and Structures collects the contributions presented at the 1st International Conference on Sustainable Buildings and Structures (Suzhou, China, 29 October-1 November 2016). The book aims to share thoughts and ideas on sustainable approaches to urban planning, engineering design and construction. The topics discussed include:-
There are many regions worldwide which are susceptible to extreme loads such as earthquakes. These can cause loss of life and adverse impacts on civil infrastructures, the environment, and communities. A series of methods and measures have been used to mitigate the effects of these extreme loads. The adopted approaches and methods must enable civil structures to be resilient and sustainable. Therefore, to reduce damage and downtime in addition to protecting life and promoting safety, new resilient structure technologies must be proposed and developed. This special issue book focuses on methods of enhancing the sustainability and resilience of civil infrastructures in the event of extreme loads (e.g., earthquakes). This book contributes proposals of and theoretical, numerical, and experimental research on new and resilient civil structures and their structural performance under extreme loading events. These works will certainly play a significant role in promoting the application of new recoverable structures. Moreover, this book also introduces some case studies discussing the implementation of low-damage structural systems in buildings as well as articles on the development of design philosophies and performance criteria for resilient buildings and new sustainable communities.
Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.
Nowadays research in earthquake engineering is mainly experimental and in large-scale; advanced computations are integrated with large-scale experiments, to complement them and extend their scope, even by coupling two different but simultaneous tests. Earthquake engineering cannot give answers by testing and qualifying few, small typical components or single large prototypes. Besides, the large diversity of Civil Engineering structures does not allow drawing conclusions from only a few tests; structures are large and their seismic response and performance cannot be meaningfully tested in an ordinary lab or in the field. So, seismic testing facilities should be much larger than in other scientific fields; their staff has to be resourceful, devising intelligent ways to carry out simultaneously different tests and advanced computations. To better serve such a mission European testing facilities and researchers in earthquake engineering have shared their resources and activities in the framework of the European project SERIES, combining their research and jointly developing advanced testing and instrumentation techniques that maximize testing capabilities and increase the value of the tests. This volume presents the first outcomes of the SERIES and its contribution towards Performance-based Earthquake Engineering, i.e., to the most important development in Earthquake Engineering of the past three decades. The concept and the methodologies for performance-based earthquake engineering have now matured. However, they are based mainly on analytical/numerical research; large-scale seismic testing has entered the stage recently. The SERIES Workshop in Ohrid (MK) in Sept. 2010 pooled together the largest European seismic testing facilities, Europe’s best experts in experimental earthquake engineering and select experts from the USA, to present recent research achievements and to address future developments. Audience: This volume will be of interest to researchers and advanced practitioners in structural earthquake engineering, geotechnical earthquake engineering, engineering seismology, and experimental dynamics, including seismic qualification.
Sustainable development of smart cities infrastructures is of paramount importance and need to be planned, designed, constructed, operated and de-commissioned in a manner that ensures economic, social, environmental and institutional sustainability over the entire infrastructure life cycle. Smart cities infrastructure however be cost effective, disaster resilient, environmentally friendly, conserving natural resources, and sustainable ensuring faster delivery of quality and durable structures which include roads, building, bridges, energy and water infrastructures. Government of India is going to encourage Public Private Partnership (PPP) as an alternate option to build most of the infrastructures, which can be useful both for green-field as well as brown-field smart cities projects. The present book is a collection of contributed research and review papers presented at the ‘National Conference on Sustainable Development of Smart Cities Infrastructure’ (SDSCI-2023) held at National Institute of Technology, Kurukshetra in May 2023.The subject matter is grouped into nine sessions which include research articles pertaining to sustainable development of smart cities, urban and rural planning, transportation, built environment and management, sustainable and smart technologies, materials, construction and maintenance, advance modelling, characterization of structures, energy and environment, performance of smart cities infrastructure under extreme loading conditions, green buildings, structural health monitoring, and ICT in smart cities, data mining and machine learning for sustainable infrastructure, GIS and remote sensing, future trends and prospects of smart cities, innovative technologies, building energy and efficiency and sobriety, and sustainable resilience to natural and man-made disasters, and smart materials, etc. The book would be a valuable reference for researchers, students, structural designers, site engineers, and all related engineers involved in the field of sustainable development of smart cities infrastructure.
This research book presents the fundamental work related to the prediction of collapse load for a moment-resisting steel frame (MRSF) subjected to earthquake forces.It demonstrates the extensive work in nonlinear analysis with particular reference to pushover analysis (POA) and incremental dynamic analysis (IDA), and deliberates at length the historical background for each method. More importantly, the book simplifies the collapse prediction process of a structure based on analytical expression. In addition, this book describes the MRSF which was designed according to Eurocode(s). This bookserves as a guide and reference for practitioners and students. Universiti Sains Malaysia, Penerbit Universiti Sains Malaysia
Of interest to engineers from civil, military, nuclear, offshore, aeronautical, transportation and other backgrounds, this book contains the proceedings of a well-established conference on the subject that was first held in 1989. Topics covered include: Impact and Blast Loading Characteristics; Protection of Structures from Blast Loads; Energy Absorbing Issues; Structural Crashworthiness; Hazard Mitigation and Assessment; Behaviour of Steel Structures; Behaviour of Structural Concrete; Material Response to High Rate Loading; Seismic Engineering Applications; Interaction Between Computational and Experimental Results; Innovative Materials and Material Systems; Fluid Structure Interaction.The shock and impact behaviour of structures presents challenges to researchers not only because it has obvious time-dependent aspects, but also because it is difficult to specify the external dynamic loading characteristics and to obtain the full dynamic properties of materials. It is crucial that we find ways to share the contributions and understanding that are developing from various theoretical, numerical and experimental studies, as well as investigations into material properties under dynamic loading conditions. This book helps to meet that need.