Download Free Analysis And Design Of A Low Power Low Noise Cmos Phase Locked Loop Book in PDF and EPUB Free Download. You can read online Analysis And Design Of A Low Power Low Noise Cmos Phase Locked Loop and write the review.

This thesis covers the analysis, design and simulation of a low-power low-noise CMOS Phase-Locked Loop (PLL). Starting with the PLL basics, this thesis discussed the PLL loop dynamics and behavioral modeling. In this thesis, the detailed design and implementation of individual building blocks of the low-power low-noise PLL have been presented. In order to improve the PLL performance, several novel architectural solutions has been proposed. To reduce the effect of blind-zone and extend the detection range of Phase Frequency Detector (PFD), we proposed the Delayed-Input-Edge PFD (DIE-PFD) and the Delayed-Input-Pulse PFD (DIP-PFD) with improved performance. We also proposed a NMOS-switch high-swing cascode charge pump that significantly reduces the output current mismatches. Voltage Controlled Oscillator (VCO) consumes the most power and dominates the noise in the PLL. A differential ring VCO with 550MHz to 950MHz tuning range has been designed, with the power consumption of the VCO is 2.5mW and the phase noise -105.2dBc/Hz at 1MHz frequency offset. Finally, the entire PLL system has been simulated to observe the overall performance. With input reference clock frequency equal 50MHz, the PLL is able to produce an 800MHz output frequency with locking time 400ns. The power consumption of the PLL system is 2.6mW and the phase noise at 1MHz frequency offset is -119dBc/Hz. The designs are implemented using IBM 0.13æm CMOS technology.
As electronics continue to become faster, smaller and more efficient, development and research around clocking signals and circuits has accelerated to keep pace. This book bridges the gap between the classical theory of clocking circuits and recent technological advances, making it a useful guide for newcomers to the field, and offering an opportunity for established researchers to broaden and update their knowledge of current trends.
This book introduces low-noise and low-power design techniques for phase-locked loops and their building blocks. It summarizes the noise reduction techniques for fractional-N PLL design and introduces a novel capacitive-quadrature coupling technique for multi-phase signal generation. The capacitive-coupling technique has been validated through silicon implementation and can provide low phase-noise and accurate I-Q phase matching, with low power consumption from a super low supply voltage. Readers will be enabled to pick one of the most suitable QVCO circuit structures for their own designs, without additional effort to look for the optimal circuit structure and device parameters.
Featuring an extensive 40 page tutorial introduction, this carefully compiled anthology of 65 of the most important papers on phase-locked loops and clock recovery circuits brings you comprehensive coverage of the field-all in one self-contained volume. You'll gain an understanding of the analysis, design, simulation, and implementation of phase-locked loops and clock recovery circuits in CMOS and bipolar technologies along with valuable insights into the issues and trade-offs associated with phase locked systems for high speed, low power, and low noise.
After a review of PLL essentials, this uniquely comprehensive workbench guide takes you step-by-step through operation principles, design procedures, phase noise analysis, layout considerations, and CMOS realizations for each PLL building block. You get full details on LC tank oscillators including modeling and optimization techniques, followed by design options for CMOS frequency dividers covering flip-flop implementation, the divider by 2 component, and other key factors. The book includes design alternatives for phase detectors that feature methods to minimize jitter caused by the dead zone effect. You also find a sample design of a fully integrated PLL for WLAN applications that demonstrates every step and detail right down to the circuit schematics and layout diagrams. Supported by over 150 diagrams and photos, this one-stop toolkit helps you produce superior PLL designs faster, and deliver more effective solutions for low-cost integrated circuits in all RF applications.
This modern, pedagogic textbook from leading author Behzad Razavi provides a comprehensive and rigorous introduction to CMOS PLL design, featuring intuitive presentation of theoretical concepts, extensive circuit simulations, over 200 worked examples, and 250 end-of-chapter problems. The perfect text for senior undergraduate and graduate students.
Thanks to the advance of semiconductor and communication technology, the wireless communication market has been booming in the last two decades. It evolved from simple pagers to emerging third-generation (3G) cellular phones. In the meanwhile, broadband communication market has also gained a rapid growth. As the market always demands hi- performance and low-cost products, circuit designers are seeking hi- integration communication devices in cheap CMOS technology. The phase-locked loop frequency synthesizer is a critical component in communication devices. It works as a local oscillator for frequency translation and channel selection in wireless transceivers and broadband cable tuners. It also plays an important role as the clock synthesizer for data converters in the analog-and-digital signal interface. This book covers the design and analysis of PLL synthesizers. It includes both fundamentals and a review of the state-of-the-art techniques. The transient analysis of the third-order charge-pump PLL reveals its locking behavior accurately. The behavioral-level simulation of PLL further clarifies its stability limit. Design examples are given to clearly illustrate the design procedure of PLL synthesizers. A complete derivation of reference spurs in the charge-pump PLL is also presented in this book. The in-depth investigation of the digital CA modulator for fractional-N synthesizers provides insightful design guidelines for this important block.
Thanks to the advance of semiconductor and communication technology, the wireless communication market has been booming in the last two decades. It evolved from simple pagers to emerging third-generation (3G) cellular phones. In the meanwhile, broadband communication market has also gained a rapid growth. As the market always demands hi- performance and low-cost products, circuit designers are seeking hi- integration communication devices in cheap CMOS technology. The phase-locked loop frequency synthesizer is a critical component in communication devices. It works as a local oscillator for frequency translation and channel selection in wireless transceivers and broadband cable tuners. It also plays an important role as the clock synthesizer for data converters in the analog-and-digital signal interface. This book covers the design and analysis of PLL synthesizers. It includes both fundamentals and a review of the state-of-the-art techniques. The transient analysis of the third-order charge-pump PLL reveals its locking behavior accurately. The behavioral-level simulation of PLL further clarifies its stability limit. Design examples are given to clearly illustrate the design procedure of PLL synthesizers. A complete derivation of reference spurs in the charge-pump PLL is also presented in this book. The in-depth investigation of the digital CA modulator for fractional-N synthesizers provides insightful design guidelines for this important block.