Download Free Analog Digital Converters For Industrial Applications Including An Introduction To Digital Analog Converters Book in PDF and EPUB Free Download. You can read online Analog Digital Converters For Industrial Applications Including An Introduction To Digital Analog Converters and write the review.

This book offers students and those new to the topic of analog-to-digital converters (ADCs) a broad introduction, before going into details of the state-of-the-art design techniques for SAR and DS converters, including the latest research topics, which are valuable for IC design engineers as well as users of ADCs in applications. The book then addresses important topics, such as correct connectivity of ADCs in an application, the verification, characterization and testing of ADCs that ensure high-quality end products. Analog-to-digital converters are the central element in any data processing system and regulation loops such as modems or electrical motor drives. They significantly affect the performance and resolution of a system or end product. System development engineers need to be familiar with the performance parameters of the converters and understand the advantages and disadvantages of the various architectures. Integrated circuit development engineers have to overcome the problem of achieving high performance and resolution with the lowest possible power dissipation, while the digital circuitry generates distortion in supply, ground and substrate. This book explains the connections and gives suggestions for obtaining the highest possible resolution. Novel trends are illustrated in the design of analog-to-digital converters based on successive approximation and the difficulties in the development of continuous-time delta-sigma modulators are also discussed.
With the proliferation of wireless networks, there is a need for more compact, low-cost, power efficient transmitters that are capable of supporting the various communication standards, including Bluetooth, WLAN, GSM/EDGE, WCDMA and 4G of 3GPP cellular. This book describes a novel idea of RF digital-to-analog converters (RFDAC) and demonstrates how they can realize all-digital, fully-integrated RF transmitters that support all the current multi-mode and multi-band communication standards. With this book the reader will: - Understand the challenges of realizing a universal CMOS RF transmitter - Recognize the design issues and the advantages and disadvantages related to analog and digital transmitter architectures - Master designing an RF transmitter from system level modeling techniques down to circuit designs and their related layout know-hows - Grasp digital polar and I/Q calibration techniques as well as the digital predistortion approaches - Learn how to generate appropriate digital I/Q baseband signals in order to apply them to the test chip and measure the RF-DAC performance. - Highlights the benefits and implementation challenges of software-defined transmitters using CMOS technology - Includes various types of analog and digital RF transmitter architectures for wireless applications - Presents an all-digital polar RFDAC transmitter architecture and describes in detail its implementation - Presents a new all-digital I/Q RFDAC transmitter architecture and its implementation - Provides comprehensive design techniques from system level to circuit level - Introduces several digital predistortion techniques which can be used in RF transmitters - Describes the entire flow of system modeling, circuit simulation, layout techniques and the measurement process
This comprehensive new handbook is a one-stop engineering reference covering data converter fundamentals, techniques, and applications. Beginning with the basic theoretical elements necessary for a complete understanding of data converters, the book covers all the latest advances made in this changing field. Details are provided on the design of high-speec ADCs, high accuracy DACs and ADCs, sample-and-hold amplifiers, voltage sources and current reference,noise-shaping coding, sigma-delta converters, and much more.
This book is intended for image sensor professionals and those interested in the boundary between sensor systems and analog and mixed-signal integrated circuit design. It provides in-depth tips and techniques necessary to understand and implement these two types of complex circuit systems together for a wide variety of architectures or trade off one against another. The tutorial begins with a brief introduction to the history and definition of a digital image sensor, as well as converter characteristics, before addressing DAC and ADC architectures. Later chapters cover pipeline ADC designs, digital correction, calibration, and testing according to IEEE standards.
The purpose of this book is to describe the theory of Digital Power Electronics and its applications. The authors apply digital control theory to power electronics in a manner thoroughly different from the traditional, analog control scheme. In order to apply digital control theory to power electronics, the authors define a number of new parameters, including the energy factor, pumping energy, stored energy, time constant, and damping time constant. These parameters differ from traditional parameters such as the power factor, power transfer efficiency, ripple factor, and total harmonic distortion. These new parameters result in the definition of new mathematical modeling: • A zero-order-hold (ZOH) is used to simulate all AC/DC rectifiers. • A first-order-hold (FOH) is used to simulate all DC/AC inverters. • A second-order-hold (SOH) is used to simulate all DC/DC converters. • A first-order-hold (FOH) is used to simulate all AC/AC (AC/DC/AC) converters. Presents most up-to-date methods of analysis and control algorithms for developing power electronic converters and power switching circuits Provides an invaluable reference for engineers designing power converters, commercial power supplies, control systems for motor drives, active filters, etc. Presents methods of analysis not available in other books
This new edition introduces operation and design techniques for Sigma-Delta converters in physical and conceptual terms, and includes chapters which explore developments in the field over the last decade Includes information on MASH architectures, digital-to-analog converter (DAC) mismatch and mismatch shaping Investigates new topics including continuous-time ΔΣ analog-to-digital converters (ADCs) principles and designs, circuit design for both continuous-time and discrete-time ΔΣ ADCs, decimation and interpolation filters, and incremental ADCs Provides emphasis on practical design issues for industry professionals
This textbook is appropriate for use in graduate-level curricula in analog-to-digital conversion, as well as for practicing engineers in need of a state-of-the-art reference on data converters. It discusses various analog-to-digital conversion principles, including sampling, quantization, reference generation, nyquist architectures and sigma-delta modulation. This book presents an overview of the state of the art in this field and focuses on issues of optimizing accuracy and speed, while reducing the power level. This new, third edition emphasizes novel calibration concepts, the specific requirements of new systems, the consequences of 22-nm technology and the need for a more statistical approach to accuracy. Pedagogical enhancements to this edition include additional, new exercises, solved examples to introduce all key, new concepts and warnings, remarks and hints, from a practitioner's perspective, wherever appropriate. Considerable background information and practical tips, from designing a PCB, to lay-out aspects, to trade-offs on system level, complement the discussion of basic principles, making this book a valuable reference for the experienced engineer.
Today's control system designers face an ever-increasing "need for speed and accuracy in their system measurements and computations. New design approaches using microcontrollers and DSP are emerging, and designers must understand these new approaches, the tools available, and how best to apply them.This practical text covers the latest techniques in microcontroller-based control system design, making use of the popular MSP430 microcontroller from Texas Instruments.The book covers all the circuits of the system, including:·Sensors and their output signals·Design and application of signal conditioning circuits·A-to-D and D-to-A circuit design·Operation and application of the powerful and popular TI MSP430 microcontroller·Data transmission circuits·System power control circuitryWritten by an experienced microcontroller engineer and textbook author, the book is lavishly illustrated and includes numerous specific circuit design examples, including a fully tested and documented hands-on project using the MSP430 that makes use of the principles described. For students, engineers, technicians, and hobbyists, this practical text provides the answers you need to design modern control systems quickly and easily. - Seasoned Texas Instruments designer provides a ground-up perspective on embedded control systems - Pedagogical style provides a self-learning approach with examples, quizzes and review features
System Design; Digital to Analog Converters; Sensors; Time-Based Measurements; Output Control Methods; Solenoids, Relays, and Other Analog Outputs; Motors; EMI; High Precision Applications; Standard Interfaces.