Download Free Algan Gan Hemt Power Amplifiers With Optimized Power Added Efficiency For X Band Applications Book in PDF and EPUB Free Download. You can read online Algan Gan Hemt Power Amplifiers With Optimized Power Added Efficiency For X Band Applications and write the review.

This work has arisen out of the strong demand for a superior power-added efficiency (PAE) of AlGaN/GaN high electron mobility transistor (HEMT) high-power amplifiers (HPAs) that are part of any advanced wireless multifunctional RF-system with limited prime energy. Different concepts and approaches on device and design level for PAE improvements are analyzed, e.g. structural and layout changes of the GaN transistor and advanced circuit design techniques for PAE improvements of GaN HEMT HPAs.
Today, computer science engineering and telecommunications are two important areas linked and even inseparable. This is obvious for the user who connects the modem of his computer on his mobile phone or telephone line to access, via the global data network, the information available on the servers. The both domains are evolving rapidly and the development of new architectures of systems dedicated to telecommunications and computing becomes essential. Especially, wireless transmission systems with high data rate. Two parts of these systems should be developed software and hardware. Another area that is renewable energies becomes more attractive for researchers in order to develop new conversion systems with good performances, and a good optimization of energy. For example, in wireless sensor systems, we try to develop new protocols permitting to have a good autonomy in terms of energy.
The work focuses on the analysis of influences of motion errors on near-range SAR applications and design of specific motion measuring and compensation algorithms. First, a novel metric to determine the optimum antenna beamwidth is proposed. Then, a comprehensive investigation of influences of motion errors on the SAR image is provided. On this ground, new algorithms for motion measuring and compensation using low cost inertial measurement units (IMU) are developed and successfully demonstrated.
This book discusses the active and passive radar cross section (RCS) estimation and techniques to examine the low observable aerospace platforms. It begins with the fundamentals of RCS, followed by the dielectric, magnetic and metamaterials parameters of the constituent materials and then explains various methods and the emerging trends followed in this area of study. The RCS estimation of phased array including the mutual coupling effect is also presented in detail in the book. The active RCS reduction is carefully touched upon through the performance of phased arrays, sidelobe cancellers and mitigation of multipath effect. Providing information on various adaptive algorithms like least mean square (LMS), recursive least square (RLS) and weighted least square algorithms, the authors also mention the recent developments in the area of embedded antennas, conformal load bearing antenna, metamaterials and frequency selective surface (FSS) based RCS reduction.
During the evolvement of autonomous driving technology, obtaining reliable 3-D environmental information is an indispensable task in approaching safe driving. The operational behavior of automotive radars can be precisely evaluated in a virtual test environment by modeling its surrounding, specifically vulnerable road users (VRUs). Such a realistic model can be generated based on the radar cross section (RCS) and Doppler signatures of a VRU. Therefore, this work proposes a high-resolution RCS measurement technique to determine the relevant scattering points of different VRUs.
Radar target simulators (RTSs) deceive a radar under test (RuT) by creating an artificial environment consisting of virtual radar targets. In this work, new techniques are presented that overcome the rasterization deficiency of current RTS systems and enable the generation of virtual targets at arbitrary high-precision positions. This allows for continuous movement of the targets and thus a more credible simulation environment.
Accompanied with the development of the wireless communication technologies, the high data traffic is more necessary for civil and industrial applications than ever The concept of an intelligent reflective surface (IRS) has attracted considerable attention recently as a low-cost solution. As the main contribution, the dissertation creates new state-of-the-art and formulates a solid milestone for the IRS research field.
Switchmode RF and Microwave Power Amplifiers, Third Edition is an essential reference book on developing RF and microwave switchmode power amplifiers. The book combines theoretical discussions with practical examples, allowing readers to design high-efficiency RF and microwave power amplifiers on different types of bipolar and field-effect transistors, design any type of high-efficiency switchmode power amplifiers operating in Class D or E at lower frequencies and in Class E or F and their subclasses at microwave frequencies with specified output power, also providing techniques on how to design multiband and broadband Doherty amplifiers using different bandwidth extension techniques and implementation technologies. This book provides the necessary information to understand the theory and practical implementation of load-network design techniques based on lumped and transmission-line elements. It brings a unique focus on switchmode RF and microwave power amplifiers that are widely used in cellular/wireless, satellite and radar communication systems which offer major power consumption savings. - Provides a complete history of high-efficiency Class E and Class F techniques - Presents a new chapter on Class E with shunt capacitance and shunt filter to simplify the design of high-efficiency power amplifier with broader frequency bandwidths - Covers different Doherty architectures, including integrated and monolithic implementations, which are and will be, used in modern communication systems to save power consumption and to reduce size and costs - Includes extended coverage of multiband and broadband Doherty amplifiers with different frequency ranges and output powers using different bandwidth extension techniques - Balances theory with practical implementation, avoiding a cookbook approach and enabling engineers to develop better designs, including hybrid, integrated and monolithic implementations
The increase of consumer, medical and sensors electronics using radio frequency (RF) and microwave (MW) circuits has implications on overall performances if design is not robust and optimized for a given applications. The current and later generation communication systems and Internet of Thing (IoT) demand for robust electronic circuits with optimized performance and functionality, but low cost, size, and power consumption. As a result, there is a need for a textbook that provides a comprehensive treatment of the subject. This book provides state-of-the-art coverage of RF and Microwave Techniques and Technologies, covers important topics: transmission-line theory, passive and semiconductor devices, active and passive microwave circuits and receiver systems, as well as antennas, noise and digital signal modulation schemes. With an emphasis on theory, design, and applications, this book is targeted to students, teachers, scientists, and practicing design engineers who are interested in broadening their knowledge of RF and microwave electronic circuit design. Readers will also benefit from a unique integration of theory and practice, provides the readers a solid understanding of the RF and microwave concepts, active and passive components, antenna, and modulation schemes. Readers will learn to solve common design problems ranging from selection of components, matching networks to biasing and stability, and digital modulation techniques. More importantly, it provides basic understanding in the analysis and design of RF and microwave circuits in a manner that is practiced in industry. This make sure that the know-how learned in this book can be effortlessly and straightway put into practice without any obstacles.
This authoritative first volume provides a solid understanding of modern spacecraft classification, failure, and electrical component requirements. This book focuses on the study of modern spacecraft, including their classification, packaging and protection, design versions, launch failure and accident analysis, and the main requirements of electronic components used. Readers find comprehensive coverage of the design and development of individual components as well as systems, their packaging, and how to make them last in space. This is a useful resource for military and civil applications. Specific topics include: The manufacturing of electronics for space; The main physical mechanisms of the impact of destabilizing factors of outer space, including various kinds of radiation, high-energy galactic icons, and particles of cosmic dust;The design of advanced space-grade microelectronic products such as memory microcircuits, microprocessors, interface and logic of microcircuits and power control microcircuits;Facts and features about the “space race” that have not been available until now.