Download Free Air And Water Pollution Control Book in PDF and EPUB Free Download. You can read online Air And Water Pollution Control and write the review.

This is a compilation of topics that are at the forefront of many technical advances and practices in air and water control. These include air pollution control, water pollution control, water treatment, wastewater treatment, industrial waste treatment and small scale wastewater treatment.
Air and water pollution occurs when toxic pollutants of varying kinds (organic, inorganic, radioactive and so on) are directly or indirectly discharged into the environment without adequate treatment to remove these potential pollutants. There are a total of 13 book chapters in three sections contributed by significant number of expert authors around the world, aiming to provide scientific knowledge and up-to-date development of various solid wastes based cost-effective adsorbent materials and its sustainable application in the removal of contaminates/pollutants from air, gas and water. This book is useful for the professions, practicing engineers, scientists, researchers, academics and undergraduate and post-graduate students’ interest on this specific area. Key Features: • Exclusive compilation of information on use of industrial and agricultural waste based adsorbents for air and water pollution abatement. • Explores utilization of industrial solid wastes in adsorptive purification and agricultural and agricultural by-products in separation and purification. • Discusses cost-effective solid wastes based emerging adsorbents. • Alternative adsorbents in the removal of a wide range of contaminants and pollutants from water is proposed. • Includes performance of unit operations in waste effluents treatment.
This practical book is valuable for a diversity of applications in both air and water pollution. Adsorption Technology usually deals with control of organic compounds, such as VOCs, pesticides, phenolics, and complex synthetic organics. However, it is also used to control certain inorganic compounds such as heavy metals, reduced sulfur gases, and chlorine. Much original work, including original figures.
Pollution is the introduction of contaminants into an environment that causes instability, disorder, harm or discomfort to the ecosystem i.e. physical systems or living organisms. Pollution can take the form of chemical substances, or energy, such as noise, heat, or light. Pollutants, the elements of pollution, can be foreign substances or energies, or naturally occurring; when naturally occurring, they are considered contaminants when they exceed natural levels. This book reviews research on global pollution control including organic waste valorisation in agriculture and its environmental risk implications, natural and anthropic stressors on freshwater decapod crustaceans, and others.
This book has arisen directly from a course on Air and Water Pollution Control delivered by the first named author at the Technical University of Berlin. Extractions of this course have been presented in Brazil, Turkey and India. It was at the Indian Institute of Technology of Madras where the first named author got in contact with Professor Varma, who turned out to be a suggestive, cooperative coauthor. This book is addressed primarily to chemical, environmental and mechanical engineers, engaged in the design and operation of equipment for air pollution control. But it will certainly be helpful to chemists and physicists confronted with the solution of environmental problems. Furthermore it is intended as a text book for engineering courses on environmental protection. The goal of the book is the presentation of knowledge on design and operation of equipment applicable to the abatement of harmful emissions into air. The technology of air pollution control is of relatively young age, but it has already achieved a high degree of performance, due to the research and develop ment work invested in the last decades in this field.
Complex environmental problems are often reduced to an inappropriate level of simplicity. While this book does not seek to present a comprehensive scientific and technical coverage of all aspects of the subject matter, it makes the issues, ideas, and language of environmental engineering accessible and understandable to the nontechnical reader.Improvements introduced in the fourth edition include a complete rewrite of the chapters dealing with risk assessment and ethics, the introduction of new theories of radiation damage, inclusion of environmental disasters like Chernobyl and Bhopal, and general updating of all the content, specifically that on radioactive waste.Since this book was first published in 1972, several generations of students have become environmentally aware and conscious of their responsibilities to the planet earth. Many of these environmental pioneers are now teaching in colleges and universities, and have in their classes students with the same sense of dedication and resolve that they themselves brought to the discipline. In those days, it was sometimes difficult to explain what indeed environmental science or engineering was, and why the development of these fields was so important to the future of the earth and to human civilization. Today there is no question that the human species has the capability of destroying its collective home, and that we have indeed taken major steps toward doing exactly that.And yet, while, a lot has changed in a generation, much has not. We still have air pollution; we still contaminate our water supplies; we still dispose of hazardous materials improperly; we still destroy natural habitats as if no other species mattered. And worst of all, we still continue to populate the earth at an alarming rate. There is still a need for this book, and for the college and university courses that use it as a text, and perhaps this need is more acute now than it was several decades ago. Although the battle to preserve the environment is still raging, some of the rules have changed. We now must take into account risk to humans, and be able to manipulate concepts of risk management. With increasing population, and fewer alternatives to waste disposal, this problem is intensified. Environmental laws have changed, and will no doubt continue to evolve. Attitudes toward the environment are often couched in what has become known as the environmental ethic. Finally, the environmental movement has become powerful politically, and environmentalism can be made to serve a political agenda.In revising this book, we have attempted to incorporate the evolving nature of environmental sciences and engineering by adding chapters as necessary and eliminating material that is less germane to today's students. We have nevertheless maintained the essential feature of this book -- to package the more important aspects of environmental engineering science and technology in an organized manner and present this mainly technical material to a nonengineering audience.This book has been used as a text in courses which require no prerequisites, although a high school knowledge of chemistry is important. A knowledge of college level algebra is also useful, but calculus is not required for the understanding of the technical and scientific concepts.We do not intend for this book to be scientifically and technically complete. In fact, many complex environmental problems have been simplified to the threshold of pain for many engineers and scientists. Our objective, however, is not to impress nontechnical students with the rigors and complexities of pollution control technology but rather to make some of the language and ideas of environmental engineering and science more understandable.
p="" This monograph is based on pollution control technologies available to deal with water and air pollution. It includes removal of variety of pollutants including arsenic, chromium, uranium, pesticides and arsenic from water using adsorption technique. In addition, this book deals with the sampling and removal of microplastics using various techniques. The contents also focus on the role of membrane technology in water and wastewater treatment, and particulate matter air pollution and its control techniques. This volume will be a useful guide for researchers, academics and scientists. ^
The Handbook of Air Pollution Prevention and Control provides a concise overview of the latest technologies for managing industrial air pollution in petrochemical, oil and gas, and allied industries. Detailed material on equipment selection, sizing, and troubleshooting operations is provided along with practical design methodology. Unique to this volume are discussions and information on energy-efficient technologies and approaches to implementing environmental cost accounting measures.Included in the text are sidebar discussions, questions for thinking and discussing, recommended resources for the reader (including Web sites), and a comprehensive glossary.The Handbook of Air Pollution Prevention and Control also includes free access to US EPA's air dispersion model SCREEN3. Detailed examples on the application of this important software to analyzing air dispersion from industrial processes and point sources are provided in the Handbook, along with approaches to applying this important tool in developing approaches to pollution prevention and in selecting control technologies. By applying SCREEN3, along with the examples given in the Handbook, the user can: evaluate the impact of processes and operations to air quality, and apply the model to assess emergency scenarios to help in planning, to develop environmental impact assessments, to select pollution control technologies, and to develop strategies for pollution prevention. Two companion books by Cheremisinoff are available:Handbook of Water and Wastewater Treatment Technologies, and Handbook of Solid Waste Management and Waste Minimization Technologies. - Uniquely combines prevention and control concepts while covering the practices and technologies that are applied to the prevention of air pollution in the chemicals manufacturing, oil and gas, iron and steel, and pharmaceutical industries, and to the cleaning and control of industrial air emissions. - Provides a bridge for today's environmental manager by focusing on an integrated approach to managing air pollution problems within industrial operations. - Shows you how to calculate financial returns from pollution prevention projects.
Hybrid and Combined Processes for Air Pollution Control: Methodologies, Mechanisms and Effect of Key Parameters provides an exhaustive inventory of hybrid and combined processes in the field of air treatment. The book covers principles, the effect of key parameters, technologies and reactors of the processes and their implementation, from lab-scale to industrial scale, also identifying future trends. Sections discuss effects on the environment and living beings, identify novel techniques and innovations, and offer a thorough assessment of the strengths and weaknesses of each. In this well-structured book, chapters are linked to the type of treatment, with a significant part dealing with treatment by transfer processes: (absorption and absorption) and on destruction treatments, such as advanced oxidation processes. - Helps readers select the most appropriate process for air pollution treatment and control - Provides a comprehensive overview of process performance under real conditions, from lab to industrial scale - Identifies future trends in industrial developments and innovation