Download Free Advances In Coastal And Ocean Engineering Vol 7 Book in PDF and EPUB Free Download. You can read online Advances In Coastal And Ocean Engineering Vol 7 and write the review.

This invaluable volume consists of five articles covering a wide range of topics in coastal oceanographic engineering. The reader can find an article discussing the modern bubble measurement techniques applied to field studies of bubble dynamics in coastal shallow water. A comprehensive review paper on nonlinear modulation of water waves provides readers with a new perspective on nonlinear processes in the coastal and ocean wave environment. For those who are interested in wave modeling, there are two review articles discussing various wave models, which can be used to study wave-structure interactions and harbor oscillations. Finally, readers who are interested in the subject of stratified flows can find an article presenting the detailed laboratory observations of lock-exchange flows.
This volume contains six papers discussing coastal processes, and physical and numerical modeling.In the first paper, Svendsen and Putrevu give an extensive review on the state of understanding of surf-zone hydrodynamics, including subjects such as wave breaking, wave-induced currents, and instability of nearshore currents and infragravity waves. They point out that the most urgent need is to develop an adequate theory for wave breaking and broken waves in the surf zone.One of the methods for studying the complex coastal processes is to perform laboratory experiments. However, physical models are always plagued by scale and laboratory effects, because the coastal process involves many different length and time scales. In the second paper, Kamphuis presents a detailed discussion on the sources and implications of the scale and laboratory effects on physical modeling.The third and the fourth papers are two parts of the discussion on the mathematical modeling of the meso-tidal barrier island coasts. To understand the dynamics of coastal inlet systems, one can either rely on empirical knowledge and construct various forms of empirical and semi-empirical models (Part I), or develop a set of mathematical models based on the physical processes (Part II). Although these models do not provide the details of the dynamics, they give valuable knowledge of the equilibrium-state relationships. de Vriend and Ribberink give a detailed review on two models, Initial Sedimentation/Erosion models and Medium-Term Morphodynamic models. They have also presented many examples of applications.In the fifth paper, Houston gives a brief review on different methods to mitigate beach loss caused by storms or persistent long-term erosion. He then describes, in detail, the method of beach nourishment, which is also called a beach fill. This paper discusses the information that must be collected to design a beach fill and that should be monitored after the completion of the project.The last paper of this volume shifts our attention to the design of offshore structures, such as gravity structures, floating barges and tankers. Chakrabarti discusses the effects of the uniform and shear currents on fixed and floating structures.
Laboratory physical models are a valuable tool for coastal engineers. Physical models help us to understand the complex hydrodynamic processes occurring in the nearshore zone and they provide reliable and economic engineering design solutions.This book is about the art and science of physical modeling as applied in coastal engineering. The aim of the book is to consolidate and synthesize into a single text much of the knowledge about physical modeling that has been developed worldwide.This book was written to serve as a graduate-level text for a course in physical modeling or as a reference text for engineers and researchers engaged in physical modeling and laboratory experimentation. The first three chapters serve as an introduction to similitude and physical models, covering topics such as advantages and disadvantages of physical models, systems of units, dimensional analysis, types of similitude and various hydraulic similitude criteria applicable to coastal engineering models.Practical application of similitude principles to coastal engineering studies is covered in Chapter 4 (Hydrodynamic Models), Chapter 5 (Coastal Structure Models) and Chapter 6 (Sediment Transport Models). These chapters develop the appropriate similitude criteria, discuss inherent laboratory and scale effects and overview the technical literature pertaining to these types of models. The final two chapters focus on the related subjects of laboratory wave generation (Chapter 7) and measurement and analysis techniques (Chapter 8).
This volume contains six papers discussing coastal processes, and physical and numerical modeling.In the first paper, Svendsen and Putrevu give an extensive review on the state of understanding of surf-zone hydrodynamics, including subjects such as wave breaking, wave-induced currents, and instability of nearshore currents and infragravity waves. They point out that the most urgent need is to develop an adequate theory for wave breaking and broken waves in the surf zone.One of the methods for studying the complex coastal processes is to perform laboratory experiments. However, physical models are always plagued by scale and laboratory effects, because the coastal process involves many different length and time scales. In the second paper, Kamphuis presents a detailed discussion on the sources and implications of the scale and laboratory effects on physical modeling.The third and the fourth papers are two parts of the discussion on the mathematical modeling of the meso-tidal barrier island coasts. To understand the dynamics of coastal inlet systems, one can either rely on empirical knowledge and construct various forms of empirical and semi-empirical models (Part I), or develop a set of mathematical models based on the physical processes (Part II). Although these models do not provide the details of the dynamics, they give valuable knowledge of the equilibrium-state relationships. de Vriend and Ribberink give a detailed review on two models, Initial Sedimentation/Erosion models and Medium-Term Morphodynamic models. They have also presented many examples of applications.In the fifth paper, Houston gives a brief review on different methods to mitigate beach loss caused by storms or persistent long-term erosion. He then describes, in detail, the method of beach nourishment, which is also called a beach fill. This paper discusses the information that must be collected to design a beach fill and that should be monitored after the completion of the project.The last paper of this volume shifts our attention to the design of offshore structures, such as gravity structures, floating barges and tankers. Chakrabarti discusses the effects of the uniform and shear currents on fixed and floating structures.
Most of the Earth's surface is covered by water. Many aspects of our everyday lives and activities may be affected by water waves in some way. Sometimes, the waves can cause disaster. One of the examples was the tsunami that occurred in the Indian Ocean on 26 December 2004. This indicates how important it is for us to fully understand water waves, in particular the very large ones. One way to do so is to perform numerical simulation based on the nonlinear theory. Considerable research advances have been made in this area over the past decade by developing various numerical methods and applying them to emerging problems: however, until now there has been no comprehensive book to reflect these advances. This unique volume aims to bridge this gap.
This unique compendium introduces the field of numerical modelling of water waves. The topics included the most widely used water wave modelling approaches, presented in increasing order of complexity and categorized into phase-averaged and phase-resolving at the highest level.A comprehensive state-of-the-art review is provided for each chapter, comprising the historical development of the method, the most relevant models and their practical applications. A full description on the method's underlying assumptions and limitations are also provided. The final chapter features coupling among different models, outlining the different types of implementations, highlighting their pros and cons, and providing numerous relevant examples for full context.The useful reference text benefits professionals, researchers, academics, graduate and undergraduate students in wave mechanics in general and coastal and ocean engineering in particular.
Free-surface flow (or wave) interaction with vegetation is a complex subject. In order to understand the underlying physical processes either physical experiments or numerical simulations, or ideally in complement, can be employed. Both approaches face lots of challenges. For example in experiments, the research question is how to scale-down appropriately the large-scale physics and how to interpret the experimental data. In numerical simulations, how to approximate numerically the complex wave-multiple rigid or flexible structures (vegetal stems) including the resolution of turbulence at all spatial and temporal scales.This book reviews the state of the art of the research in the area of wave-vegetation interaction for coastal applications using numerical and experimental approaches. The reference text will be useful to students, early-career researchers, teachers and practicing engineers in the field of ocean engineering, civil engineering and climate change.
The handbook contains a comprehensive compilation of topics that are at the forefront of many of the technical advances in ocean waves, coastal, and ocean engineering. More than 110 internationally recognized authorities in the field of coastal and ocean engineering have contributed articles in their areas of expertise to this handbook. These international luminaries are from highly respected universities and renowned research and consulting organizations around the world.
This book is an introductory treatment to coastal and estuarine processes for earth scientists or engineers. Suitable for a first course on the subject, it covers water waves, surf zone hydrodynamics, tides in oceans and estuaries, storm surges, estuarine mixing, basic sediment transport, coastal morphodynamics and coastal groundwater dynamics. The book contains a substantial amount of new material. For example, the explicit, analytical treatment of transient, forced long waves strongly enhances the discussion on tsunami, storm surges and surf beat. The treatment of turbulent mixing includes finite mixing length effects, which provide an explanation for differential diffusion of different sediment sizes in suspension. The recently discovered effects of acceleration skewness and boundary layer streaming are also included in the basic sediment transport models. In addition, the treatment of beach groundwater dynamics: The mechanisms by which waves as well as tides drive groundwater motion, builds the link between the previously unconnected fields of coastal hydraulics and regional groundwater modeling. To serve as an effective reference book for professionals, the book is fully indexed and comprehensively cross referenced.
This book discusses the subject of turbulence encountered in coastal and civil engineering.The primary aim of the book is to describe turbulence processes including transition to turbulence; mean and fluctuating flows in channels/pipes, and in currents; wave boundary layers (including boundary layers under solitary waves); streaming processes in wave boundary layers; turbulence processes in breaking waves including breaking solitary waves; turbulence processes such as bursting process and their implications for sediment transport; flow resistance in steady and wave boundary layers; and turbulent diffusion and dispersion processes in the coastal and river environment, including sediment transport due to diffusion/dispersion.Both phenomenological and statistical theories are described in great detail. Turbulence modelling is also described, and several examples for modelling of turbulence in steady flow and wave boundary layers are presented.The book ends with a chapter containing hands-on exercises on a wide variety of turbulent flows including experimental study of turbulence in an open-channel flow, using Laser Doppler Anemometry; Statistical, correlation and spectral analysis of turbulent air jet flow; Turbulence modelling of wave boundary layer flows; and numerical modelling of dispersion in a turbulent boundary layer, a set of exercises used by the authors in their Masters classes over many years.Although the book is essentially intended for professionals and researchers in the area of Coastal and Civil Engineering, and as a text book for graduate/post graduate students, the contents of the book will, however, additionally provide sufficient background in the study of turbulent flows relevant to many other disciplines, such as Wind Engineering, Mechanical Engineering, and Environmental Engineering.