Download Free 2009 Modu Code Book in PDF and EPUB Free Download. You can read online 2009 Modu Code and write the review.

The Assembly, at its twenty-sixth session (23 November to 2 December 2009), adopted by resolution A.1023(26) the Code for the Construction and Equipment of Mobile Offshore Drilling Units, 2009 (2009 MODU Code), which had been developed following a thorough revision of the 1989 MODU Code adopted by resolution A.649(16). In adopting the 2009 MODU Code, the Assembly recalled in particular that, since the adoption of the 1989 MODU Code, the Organization had adopted a significant number of amendments to many of the regulations of the International Convention for the Safety of Life at Sea, 1974 (SOLAS) referenced in the Code, and also that the International Civil Aviation Organization (ICAO) had adopted amendments to the Convention on International Civil Aviation which impacted on the provisions for helicopter facilities as contained in the Code. The 2009 MODU Code provides an international standard for MODUs of new construction which will facilitate their international movement and operation and ensure a level of safety for such units and for personnel on board, equivalent to that required by the 1974 SOLAS Convention and the Protocol of 1988 relating to the International Convention on Load Lines, 1966, for conventional ships engaged on international voyages. The 2009 MODU Code supersedes the 1989 MODU Code for mobile offshore drilling units, the keels of which are laid or which are at a similar stage of construction on or after 1 January 2012. For MODUs constructed before that date, the provisions of the 1989 MODU Code still apply.
Recommends design criteria, construction standards and related safety measures. Appends model safety certificates.
The Code for the Construction and Equipment of Mobile Offshore Drilling Units, 2009 (2009 MODU Code) provides an international standard for mobile offshore drilling units (MODU) constructed on or after 1 January 2012. It facilitates their international movement and operation and ensures a level of safety for such units and for personnel on board, equivalent to that required by the 1974 SOLAS Convention and the Protocol of 1988 relating to the International Convention on Load Lines, 1966, for conventional ships engaged on international voyages.This edition of the 2009 MODU Code incorporates the 2013 (MSC.359(92)), 2014 (MSC.384(94) and MSC.387(94)), 2016 (MSC.407(96)) and 2017 (MSC.435 (98)) amendments to the Code.For mobile offshore drilling units constructed before 1 January 2012, the provisions of the previous MODU Codes (1989 and 1979) apply, depending on the date of their construction
This publication contains the text of guidelines for inert gas systems and relevant IMO documents on inert gas systems and supersedes the publication 860 83.15.E.
The International Code on Intact Stability 2008 (2008 IS Code), presents mandatory and recommendatory stability criteria and other measures for ensuring the safe operation of ships, to minimize the risk to such ships, to the personnel on board and to the environment. The 2008 IS Code took effect on 1 July 2010. The 2008 IS Code features:a full update of the previous IS Code; criteria based on the best state-of-the-art concepts available at the time they were developed, taking into account sound design and engineering principles and experience gained from operating ships; influences on intact stability such as the dead ship condition, wind on ships with large windage area, rolling characteristics and severe seas. This publication also presents Explanatory Notes to the 2008 IS Code, intended to provide administrations and the shipping industry with specific guidance to assist in the uniform interpretation and application of the intact stability requirements of the 2008 IS Code.
These Guidelines have been developed for the design and construction of new offshore supply vessels with a view to promoting the safety of such vessels and their personnel, recognizing the unique design features and service characteristics of these vessels. Furthermore, these Guidelines provide a standard of safety equivalent to the relevant requirements of the International Convention for the Safety of Life at Sea, 1974, as amended, and in particular to the stability criteria of the Code on Intact Stability for all Types of Ships Covered by IMO Instruments (IS Code), as amended. Provisions fo.
The Code on noise levels on board ships has been developed to provide international standards for protection against noise under the provisions of regulation II-1/3-12 of the SOLAS Convention. The Code, adopted by resolution MSC.337(91), recognizes the need to establish mandatory noise level limits for machinery spaces, control rooms, workshops, accommodation and other spaces on board ships, and enters into force on 1 July 2014.The Code applies to new ships of a gross tonnage of 1,600 and above. The specific provisions relating to potentially hazardous noise levels, mitigation and personal protective gear contained in the Code may be applied to existing ships of a gross tonnage of 1,600 and above, as far as reasonable and practical, to the satisfaction of the Administration. The Code may be applied to new ships of a gross tonnage of less than 1,600 as far as reasonable and practical, to the satisfaction of the Administration. The Code includes: a format for noise survey reports; guidance on the inclusion of noise issues in safety management systems; - suggested methods of attenuating noise; and - a simplified procedure for determining noise exposure. These regulations, recommendations and advice are intended to provide Administrations with the tools to promote "hearing saving" environments on board ships. Although legally treated as a mandatory instrument under the SOLAS Convention, certain provisions of the Code remain recommendatory or informative.
IBC = International code for the construction and equipment of ships carrying dangerous chemicals in bulk
The 2020 edition of the 2011 ESP Code provides requirements for an enhanced programme of inspections during surveys of single-hull and of double-hull bulk carriers and single-hull and double-hull oil tankers, in accordance with the provision of SOLAS regulation XI-1/2 and in line with the IACS UR Z10 series. It provides, in particular, special requirements for: (1) Renewal, annual and intermediate surveys; (2) Preparation for surveys; (3) Documentation on board; (4) Procedures for thickness measurements; (5) Reporting and evaluation of surveys