Download Free Wastewater Treatment Facilities Book in PDF and EPUB Free Download. You can read online Wastewater Treatment Facilities and write the review.

Step-by-step procedures for planning, design, construction and operation: * Health and environment * Process improvements * Stormwater and combined sewer control and treatment * Effluent disposal and reuse * Biosolids disposal and reuse * On-site treatment and disposal of small flows * Wastewater treatment plants should be designed so that the effluent standards and reuse objectives, and biosolids regulations can be met with reasonable ease and cost. The design should incorporate flexibility for dealing with seasonal changes, as well as long-term changes in wastewater quality and future regulations. Good planning and design, therefore, must be based on five major steps: characterization of the raw wastewater quality and effluent, pre-design studies to develop alternative processes and selection of final process train, detailed design of the selected alternative, contraction, and operation and maintenance of the completed facility. Engineers, scientists, and financial analysts must utilize principles from a wide range of disciplines: engineering, chemistry, microbiology, geology, architecture, and economics to carry out the responsibilities of designing a wastewater treatment plant. The objective of this book is to present the technical and nontechnical issues that are most commonly addressed in the planning and design reports for wastewater treatment facilities prepared by practicing engineers. Topics discussed include facility planning, process description, process selection logic, mass balance calculations, design calculations, and concepts for equipment sizing. Theory, design, operation and maintenance, trouble shooting, equipment selection and specifications are integrated for each treatment process. Thus delineation of such information for use by students and practicing engineers is the main purpose of this book.
Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. The expert coverage you need to design automated wastewater systems Especially written for design professionals, Automation of Wastewater Treatment Facilities discusses the selection of instruments, installation, sizing of control elements, and the best choice for controllers and computers for automated wastewater plants.
The wide adoption of wastewater treatment processes and use of novel technologies for improvement of nitrogen and phosphorus removals from wastewater have been introduced to meet stringent discharge standards. Municipal wastewater treatment plants (MWWTPs) are one of major contributors to the increase in the global GHG emissions and therefore it is necessary to carry out intensive studies on quantification, assessment and characterization of GHG emissions in wastewater treatment plants, on the life cycle assessment from GHG emission prospective, and on the GHG mitigation strategies. Greenhouse Gas Emission and Mitigation in Municipal Wastewater Treatment Plants summarizes the recent development in studies of greenhouse gas emissions (N2O, CH4 and CO2) in MWWTPs. It also summarizes the development in life cycle assessment on GHG emissions in consideration of the energy usage in MWWTPs. The strategies in mitigating GHG emissions are discussed and the book provides an overview for researchers, students, water professionals and policy makers on GHG emission and mitigation in MWWTPS and industrial wastewater treatment processes. The book is a valuable resource for undergraduate and postgraduate students in the water, climate, and energy areas of research. It is also a useful reference source for water professionals, government policy makers, and research institutes.
Completely up-to-date coverage of water treatment facility design and operation This Second Edition of Susumu Kawamura's landmark volume offerscomprehensive coverage of water treatment facility design, from thebasic principles to the latest innovations. It covers a broadspectrum of water treatment process designs in detail and offersclear guidelines on how to choose the unit, process, and equipmentthat will maximize overall efficiency and minimize maintenancecosts. This book also explores many important operational issuesthat affect today's plant operators and facility designers. This new edition introduces several new subjects, including valueengineering, watershed management, dissolved air flotation process,filtered reservoir (clearwell) design, and electrical systemdesign. It provides expanded and updated coverage of objectives forfinished water quality, instrumentation and control, disinfectionprocess, ozonation, disinfection by-product control, the GACprocess, and the membrane filtration process. Other importantfeatures of this Second Edition include: * Practical guidance on the design of every water treatment plantcomponent * New information on plant layout, cost estimation, sedimentationissues, and more * English and SI units throughout * Help in designing for compliance with water treatment-relatedgovernment regulations Supplemented with hundreds of illustrations, charts, and tables,Integrated Design and Operation of Water Treatment Facilities,Second Edition is an indispensable, hands-on resource for civilengineers and managers, whether working on new facilities orredesigning and rebuilding existing facilities.
Practical techniques for handling industrial waste and designing treatment facilities Practical Wastewater Treatment is designed as a teaching and training tool for chemical, civil, and environmental engineers. Based on an AIChE training course, developed and taught by the author, this manual equips readers with the skills and knowledge needed to design a wastewater treatment plant and handle various types of industrial wastes. With its emphasis on design issues and practical considerations, the manual enables readers to master treatment techniques for managing a wide range of industrial wastes, including oil, blood and protein, milk, plating, refinery, and phenolic and chemical plant wastes. A key topic presented in the manual is biological modeling for designing wastewater treatment plants. The author demonstrates how these models lead to both more efficient and more economical plants. As a practical training tool, this manual contains a number of features to assist readers in tackling complex, real-world problems, including: * Examples and worked problems throughout the manual demonstrate how various treatment plants and treatment techniques work * Figures and diagrams help readers visualize and understand complex design issues * References as well as links to online resources serve as a gateway to additional information * Practical design hints, stemming from the author's extensive experience, help readers save time and avoid unwanted and expensive pitfalls * Clear and logically organized presentation has been developed and refined based on an AIChE course taught by the author in the United States, Mexico, and Venezuela Whether a novice or experienced practitioner, any engineer who deals with the treatment of industrial waste will find a myriad of practical advice and useful techniques that they can immediately apply to solve problems in wastewater treatment.
This study guide is a companion to the sixth edition of Operation of Municipal Wastewater Treatment Plants (Manual of Practice No. 11). These two publications serve as the principal training documents for plant managers, superintendents, and operators of municipal wastewater treatment plants as well as college students and consulting engineers. The manual and study guide can be used for training classes, studying for certification exams, and improving the quality of operations within the treatment plant or firm. As with the updated manual, this study guide reflects the state of the art in plant management and operation. The questions emphasize principles of treatment, plant management, troubleshooting, and preventive maintenance. Operating a wastewater treatment facility is challenging and requires continuing education to keep up with those challenges. As such, this study guide contains challenging questions and detailed solutions. A list of symbols and acronyms, conversion factors, and a glossary are also Included in this study guide. These questions can be used to help develop advanced knowledge and ensure that wastewater treatment facilities are fulfilling their mission of environmental protection.
Antimicrobial resistance is arguably the greatest threat to worldwide human health. This book evaluates the roles of human water use, treatment and conservation in the development and spread of antimicrobial resistance. Designed as a companion volume to Antimicrobial Resistance in the Environment (Wiley-Blackwell, 2012), this book is a multi-disciplinary synthesis of topics related to antimicrobial resistance and wastewater treatment processes. Antimicrobial Resistance in Wastewater Treatment Processes assembles detailed discussions written by many of the world's best-known experts in microbiology, civil engineering, chemistry, environmental science, public health and related fields. The book presents a collection of subjects that includes: Current knowledge of the role of the environment in development and spread of antimicrobial resistance Chemical analysis of antibiotics in environmental samples Molecular methods for analysis of antimicrobial resistance genes Advanced wastewater treatment processes and antimicrobial resistance effects Public perception of risk related to health consequences of antimicrobial resistance Public health implications of antimicrobial resistance with focus on wastewater treatment processes Antimicrobial resistance has gained a foothold in the global consciousness as a serious public health threat. There is a much greater appreciation for the role of the environment in the dissemination of antimicrobial resistance and the effects of pollutants that can potentially promote development of resistance in bacteria. Contaminants released from wastewater treatment plants are a concern. In Antimicrobial Resistance in Wastewater Treatment Processes, readers will be guided through examinations of the current science related to this important health issue.
Both practical and theoretical, this book provides the basic principles of soil chemistry, hydrology, wetland ecology, microbiology, vegetation and wildlife as a sound introduction to this innovative technology to treat toxic wastewaters and sludges. The use of wetlands for acid mine drainage, and metals removal in municipal, urban runoff, and industrial systems is discussed. Case histories are also presented, demonstrating specific types of constructed wetlands and applications to municipal wastewater, home sites, coal and non-coal mining, coal-fired electric power plants, chemical and pulp industry, agriculture, landfill leachate, and urban stormwater. Construction and management guidelines are clearly explained, providing information on applicable policies and regulations, siting and construction, and operations and monitoring of constructed wetlands treatment systems. Recent theoretical and empirical results from operating systems and research facilities, including such new applications as nutrient removal from eutrophic lakes and urban stormwater treatment within highway rights-of-way, are included. This book is an ideal resource for wastewater treatment plants, consulting engineers, federal and state regulators, industrial environmental managers, municipalities, environmental health professionals, and ecologists.
NOTE TO THE READER: All forms and material that were previously on a CD-ROM that accompanied this book have been moved to the following web site: http://booksupport.wiley.com Tested-and-proven techniques for quick, accurate estimates Here is the first manual that guides engineers, planners, and contractors through the process of estimating the cost of building water treatment facilities. Based on more than eighty years of the two authors' collective experience, the Cost Estimating Manual for Water Treatment Facilities not only enables you to arrive at a dependable estimate, it shows you how to do it quickly with a minimum of information and supporting data. In order to ensure reliability, the authors have compiled and analyzed the results from their own construction cost estimates for more than 500 projects as well as the results from many other engineers and contractors. The manual identifies forty-three treatment processes, nine types of water treatment plants, plus five additional types of advanced water treatment plants. The authors then demonstrate how to calculate costs for each element, accounting for needed mark-ups and allowances in order to arrive at the total plant construction cost. To help you make your own estimates, the manual provides: Examples of cost estimates for different water treatment processes Historical data from several public agencies Sample tables for 10 mgd and 100 mgd product water flow rates for each type of treatment plant Website access with Excel spreadsheets that enable you to perform estimates using your own data Now that the Cost Estimating Manual for Water Treatment Facilities is available, you no longer have to rely on hunches and anecdotal information; you have a proven, scientific method that leads to reliable estimates.