Download Free Tunable Multiband Ferroelectric Devices For Reconfigurable Rf Frontends Book in PDF and EPUB Free Download. You can read online Tunable Multiband Ferroelectric Devices For Reconfigurable Rf Frontends and write the review.

Reconfigurable RF-frontends aim to cope with the continuous pursuit of wider frequency coverage, higher efficiency, further compactness and lower cost of ownership. They are expected to lay the foundations of future software defined or cognitive radios. As a potential enabling technology for the frontends, the tunable ferroelectric devices have shown not only enhanced performance but also new functionalities. This book explores the recent developments in the field. It provides a cross-sectional perspective on the interdisciplinary research. With attention to the devices based on ceramic thick-films and crystal thin-films, the book reviews the adapted technologies of material synthesis, film deposition and multilayer circuitry. Next, it highlights the original classes of thin-film ferroelectric devices, including stratified metal-insulator-metal varactors with suppression of acoustic resonance and programmable bi-stable high frequency capacitors. At the end the book analyzes how the frontends can be reformed by tunable multiband antennas, tunable single- and multiband impedance matching networks and tunable substrate integrated waveguide filters, which are all built on low cost ferroelectric thick-films. For all the above devices, the theoretical analyses, modeling and design methods are elaborated, while through demonstrative prototypes the application potential is evaluated.
This book investigates and discusses the hardware design and implementation to achieve smart air interfaces with a reduced number of Radio Frequency (RF) transmitter and receiver chains, or even with a single reconfigurable RF-Frontend in the user terminal. Various hardware challenges are identified and addressed to enable the implementation of autonomous reconfigurable RF-Frontend architectures. Such challenges are (i) the conception of a transceiver with wide tuning range of at least up to 6 GHz, (ii) the system integration of reconfigurable technologies targeting current compact devices that demand voltages up to 100 V for adaptive controlling and (iii) the realization of a multiband and multistandard antenna module employing agile components to provide flexible frequency coverage. A solid design of a reconfigurable frontend is proposed from the RF part to the digital baseband. The system integration of different components in the reconfigurable RF-Frontend of a portable-oriented device architecture is demonstrated.
Describes the theory, modeling, and design of tunable mm-wave circuits and systems using CMOS, RF MEMS, and microwave liquid crystals.
This book describes the characterization of liquid crystal materials at microwave frequencies and the usage of these materials in reconfigurable planar antennas and in their electrical tunable components. It reports for the first time the realization of a two-dimensional electronic beam steering antenna and polarization agile planar antennas with liquid crystal display technology. It gives a detailed description of all the theoretical analyses, modeling and design methods that were involved in the realization of these devices as well as their validation using measurement of demonstrative prototypes. This book also shows that low profile, low cost, high gain, electronic beam steering and polarization agile antennas can be fabricated in larger sizes by using existing automated liquid crystal display manufacturing techniques. The innovative ideas and method described in this work represent a considerable advancement in the field of electronically reconfigurable antennas based on liquid crystal technology and are expected to draw significant interest in the future. Such antennas may become important, for example, in mobile terminals integrated into the body of laptops (in the cover) or of automobiles (in the rooftop), ships or boats, for which flat, low-profile and low-cost antennas are required.
This book provides comprehensive knowledge, aimed at practicing integrated circuit design engineer or researcher, to learn and design a low noise amplifier (LNA) for single and multiband applications. The content is structured in a way so that even a beginner can follow the design method easily. This book features the following characteristics: different types of LNA designs (with key building blocks) are discussed, and detailed analysis is given for each LNA design, which covers from the fundamental and principal knowledge to the justification of the design approach. Detailed design approaches are using 180 nm and 130nm CMOS technologies, purposely presented in this manner to give exposure to the design of LNA under different technologies. The LNAs in this book are designed for GSM, WCDMA and WLAN standards, but the same method can be used for other frequencies of operation. Comprehensive analyses on the extreme or corner condition effects are highlighted. Besides, detailed derivation of equations relating to the parameters of the LNA’s performance metrics help LNA designers in understanding how the performance metrics of the LNA can be optimized to meet the desired specification. Electromagnetic analyses using Sonnet, an electromagnetic tool able to replace the conventional post-layout simulation with resistance and capacitance parasitic extraction for more accurate frequency performance prediction are presented. The electromagnetic method is proposed to be used in the LNA design as it can accurately predict the LNA’s performance before tape-out for first-pass fabrication. MATLAB codes are provided to generate important S-parameters and noise figure values.
The inadequate use of wireless spectrum resources has recently motivated researchers and practitioners to look for new ways to improve resource efficiency. As a result, new cognitive radio technologies have been proposed as an effective solution. The Handbook of Research on Software-Defined and Cognitive Radio Technologies for Dynamic Spectrum Management examines the emerging technologies being used to overcome radio spectrum scarcity. Providing timely and comprehensive coverage on topics pertaining to channel estimation, spectrum sensing, communication security, frequency hopping, and smart antennas, this research work is essential for use by educators, industrialists, and graduate students, as well as academicians researching in the field.
The increasing demand for electronic devices for private and industrial purposes lead designers and researchers to explore new electronic devices and circuits that can perform several tasks efficiently with low IC area and low power consumption. In addition, the increasing demand for portable devices intensifies the call from industry to design sensor elements, an efficient storage cell, and large capacity memory elements. Several industry-related issues have also forced a redesign of basic electronic components for certain specific applications. The researchers, designers, and students working in the area of electronic devices, circuits, and materials sometimesneed standard examples with certain specifications. This breakthrough work presents this knowledge of standard electronic device and circuit design analysis, including advanced technologies and materials. This outstanding new volume presents the basic concepts and fundamentals behind devices, circuits, and systems. It is a valuable reference for the veteran engineer and a learning tool for the student, the practicing engineer, or an engineer from another field crossing over into electrical engineering. It is a must-have for any library.
This lecture discusses the use of graph models to represent reconfigurable antennas. The rise of antennas that adapt to their environment and change their operation based on the user's request hasn't been met with clear design guidelines. There is a need to propose some rules for the optimization of any reconfigurable antenna design and performance. Since reconfigurable antennas are seen as a collection of self-organizing parts, graph models can be introduced to relate each possible topology to a corresponding electromagnetic performance in terms of achieving a characteristic frequency of operation, impedance, and polarization. These models help designers understand reconfigurable antenna structures and enhance their functionality since they transform antennas from bulky devices into mathematical and software accessible models. The use of graphs facilitates the software control and cognition ability of reconfigurable antennas while optimizing their performance. This lecture also discusses the reduction of redundancy, complexity and reliability of reconfigurable antennas and reconfigurable antenna arrays. The full analysis of these parameters allows a better reconfigurable antenna implementation in wireless and space communications platforms. The use of graph models to reduce the complexity while preserving the reliability of reconfigurable antennas allow a better incorporation in applications such as cognitive radio, MIMO, satellite communications, and personal communication systems. A swifter response time is achieved with less cost and losses. This lecture is written for individuals who wish to venture into the field of reconfigurable antennas, with a little prior experience in this area, and learn how graph rules and theory, mainly used in the field of computer science, networking, and control systems can be applied to electromagnetic structures. This lecture will walk the reader through a design and analysis process of reconfigurable antennas using graph models with a practical and theoretical outlook.
Research on radiation-tolerant electronics has increased rapidly over the past few years, resulting in many interesting approaches to modeling radiation effects and designing radiation-hardened integrated circuits and embedded systems. This research is strongly driven by the growing need for radiation-hardened electronics for space applications, high-energy physics experiments such as those on the Large Hadron Collider at CERN, and many terrestrial nuclear applications including nuclear energy and nuclear safety. With the progressive scaling of integrated circuit technologies and the growing complexity of electronic systems, their susceptibility to ionizing radiation has raised many exciting challenges, which are expected to drive research in the coming decade. In this book we highlight recent breakthroughs in the study of radiation effects in advanced semiconductor devices, as well as in high-performance analog, mixed signal, RF, and digital integrated circuits. We also focus on advances in embedded radiation hardening in both FPGA and microcontroller systems and apply radiation-hardened embedded systems for cryptography and image processing, targeting space applications.