Download Free Three Dimensional Numerical Analysis Of Flow Structure And Sediment Transport Process In Open Channels Book in PDF and EPUB Free Download. You can read online Three Dimensional Numerical Analysis Of Flow Structure And Sediment Transport Process In Open Channels and write the review.

This research project focuses on the analysis and prediction of flow structures and sediment transport process in open channels by using three-dimensional numerical models. The numerical study was performed using the open source computational fluid dynamics (CFD) solver based on the finite volume method (FVM) – OpenFOAM. Turbulence is treated by means of the two main methodologies; i.e. Large Eddy Simulation (LES) and Reynolds-Averaged Navier–Stokes (RANS). The free surface is tracked using the Volume of Fluid method (VOF). In addition, a new multi-dimensional model for sediment transport based on the Eulerian two-phase mathematical formulation is applied. The results obtained from the different numerical configurations are verified and validated against experimental data sets published in important research journals. The main characteristics of the flow structures are studied by using three set-up cases in steady and unsteady-state (transient) hydraulic flow conditions. On the other hand, the new multi-dimensional model for sediment transport is applied to predict the local scour caused by submerged wall jet test-case. Non-uniform structured elements are used in the grid configuration of the computational domains. A mesh sensitivity analysis is performed in each test-case study in order to obtain independent grid results. This analysis provides a balance between accuracy and optimal computational time. The results demonstrate that the three-dimensional numerical configurations satisfactorily reproduce the temporal variation of the different variables under study with correct trends and high correlation with the experimental values. Regarding the analysis and prediction of the flow structures, the results show the importance of the turbulence approach in the numerical configuration. On the other hand, the results of the new multi-dimensional two-phase model allow to analyze the full dynamics for sediment transport (concentration profile). Although the numerical results are satisfactory, the application of three-dimensional numerical models in field-scale cases requires a high computational resource.
Open Channel Flow, 2nd edition is written for senior-level undergraduate and graduate courses on steady and unsteady open-channel flow. The book is comprised of two parts: Part I covers steady flow and Part II describes unsteady flow. The second edition features considerable emphasis on the presentation of modern methods for computer analyses; full coverage of unsteady flow; inclusion of typical computer programs; new problem sets and a complete solution manual for instructors.
This monograph provides a comprehensive state-of-the-art description of the work carried out in the UK and Japan on "Flow and Sediment Transport in Compound Channels". It therefore describes research which has been conducted, primarily over the last two decades, and which has yielded a fairly detailed picture of the important behaviours of compound channels and produced a number of engineering prediction methods which ought to be widely adopted in practice. The text will inevitably highlight areas where our knowledge is sparse and it will spur others on in the task of filling in such gaps. The concept of bi-national groups of researchers meeting together intermittently over period of some years, though not new, has drawn both inspiration and experience and the interaction has produced tangible outcomes in the form of this useful publication.
Comprehensive text on the fundamentals of modeling flow and sediment transport in rivers treating both physical principles and numerical methods for various degrees of complexity. Includes 1-D, 2-D (both depth- and width-averaged) and 3-D models, as well as the integration and coupling of these models. Contains a broad selection of numerical methods for open-channel flows, such as the SIMPLE(C) algorithms on staggered and non-staggered grids, the projection method, and the stream function and vorticity method. The state-of-the-art in sediment transport modeling approaches is described, such as non-equilibrium transport models, non-uniform total-load transport models, and semi-coupled and coupled procedures for flow and sediment calculations. Sediment transport theory is discussed and many newly-developed, non-uniform sediment transport formulae are presented. The many worked examples illustrate various conditions, such as reservoir sedimentation; channel erosion due to dam construction; channel widening and meandering; local scour around in-stream hydraulic structures; vegetation effects on channel morphodynamic processes; cohesive sediment transport; dam-break fluvial processes and contaminant transport. Recommended as a reference guide for river and hydraulic engineers and as a course text for teaching sediment transport modeling, computational free-surface flow, and computational river dynamics to senior students.
This book is an introduction to the theory, practice, and implementation of the Lattice Boltzmann (LB) method, a powerful computational fluid dynamics method that is steadily gaining attention due to its simplicity, scalability, extensibility, and simple handling of complex geometries. The book contains chapters on the method's background, fundamental theory, advanced extensions, and implementation. To aid beginners, the most essential paragraphs in each chapter are highlighted, and the introductory chapters on various LB topics are front-loaded with special "in a nutshell" sections that condense the chapter's most important practical results. Together, these sections can be used to quickly get up and running with the method. Exercises are integrated throughout the text, and frequently asked questions about the method are dealt with in a special section at the beginning. In the book itself and through its web page, readers can find example codes showing how the LB method can be implemented efficiently on a variety of hardware platforms, including multi-core processors, clusters, and graphics processing units. Students and scientists learning and using the LB method will appreciate the wealth of clearly presented and structured information in this volume.
After publishing the famous “Fluvial Processes in Geomorphology” in the early 1960s, the work of Luna Leopold, Gordon Wolman, and John Miller became a key for opening the door to understanding rivers and streams. They first illustrated the problem to geomorphologists and geographers. Later, Chang, in his “Fluvial Processes in River Engineering”, provided a basis for engineers, showing this group of professionals how to deal with rivers and how to understand them. Since then, more informative studies have been published. Many of the authors started to combine fluvial geomorphology knowledge and river engineering needs, such as “Tools in Fluvial Geomorphology” by G. Mathias Kondolf and Hervé Piégay, or focused more on river engineering tasks, such as “Stream Restoration in Dynamic Fluvial Systems: Scientific Approaches” by Andrew Simon, Sean Bennett, and Janine Castro. Finally, Luna Leopold summarized river and stream morphologies in the beautiful “A view of the river”. It appears that we continue to explore this subject in the right direction. We better understand rivers and streams, and as engineers and fluvial geomorphologists, we can establish tools to help bring rivers alive. However, there is still a hunger for more scientific tools that we could use to further understand rivers and to support the development of healthy streams and rivers with high biodiversity in the present world, which has started to face water scarcity.