Download Free The Biology Of Reaction Wood Book in PDF and EPUB Free Download. You can read online The Biology Of Reaction Wood and write the review.

The book is a fundamental reference source on reaction wood for wood scientists and technologists, plant biologists, silviculturists, forest ecologists, and anyone involved in the growing of trees and the processing of wood. It brings together our current understanding of all aspects of reaction wood, and is the first book to discuss both compression wood and tension wood. Trees produce reaction wood to maintain the vertical orientation of their stems and the optimum angle of each branch. They achieve this by laying down fibre cell walls in which differences in physical and chemical structure from those of normal fibres are expressed as differential stresses across the stem or branch. This process, while of obvious value for the survival of the tree, causes serious problems for the utilisation of timber. Timber derived from trees containing significant amounts of reaction wood is subject to dimensional instability on drying, causing twisting, bending and splitting. It is also difficult to work as timber, and for the pulp and paper industry the cost of removing the increased amount of lignin in compression wood is substantial. This has both practical and economic consequences for industry. Understanding the factors controlling reaction wood formation and its effect on wood structure is therefore fundamental to our understanding of the adaptation of trees to their environment and to the sustainable use of wood. The topics covered include: -Morphology, anatomy and ultrastructure of reaction wood -Cell-wall polymers in reaction wood and their biosynthesis -Changes in tree proteomes during reaction wood formation -The biomechanical action and biological functions of reaction wood - Physical and mechanical properties of reaction wood from the scale of cell walls to planks -The detection and characterisation of compression wood -Effects of reaction wood on the performance of wood and wood-based products - Commercial implications of reaction wood and the influence of forest management on its formation
The updated seventh edition of the classic text on wood science and forestry The seventh edition of Forest Products and Wood Science: An Introduction offers a fully revised and updated review of the forest products industry. This classic text contains a comprehensive review of the subject and presents a thorough understanding of the anatomical and physical nature of wood. The authors emphasize its use as an industrial raw material. Forest Products and Wood Science provides thorough coverage of all aspects of wood science and industry, ranging from tree growth and wood anatomy to a variety of economically important wood products, along with their applications and performance. The text explores global raw materials, the increasing use of wood as a source of energy and chemicals and environmental implications of the use of wood. This edition features new material on structural composites, non-structural composites, durability and protection, pulp and paper, energy and chemicals, and global raw materials. This seventh edition of the classic work: Contains new information on a variety of topics including: structural composites, non-structural composites, durability and protection, pulp and paper, energy and chemicals and global raw materials Includes a fully revised text that meets the changing needs of the forestry, engineering, and wood science academics and professionals Presents material written by authors with broad experience in both the private and academic sectors Written for undergraduate students in forestry, natural resources, engineering, and wood science, as well as forest industry personnel, engineers, wood-based manufacturing and using professionals, the seventh edition of Forest Products and Wood Science updates the classic text that has become an indispensable resource.
This book is exclusively concerned with wood modification, although many of these processes are generic and can be applied to other lignocellulosic materials. There have been many rapid developments in wood modification over the past decade and, in particular, there has been considerable progress made in the commercialisation of technologies. Topics covered include: The use of timber in the 21st century Modifying the properties of wood Chemical modification of wood: Acetic Anhydride Modification and reaction with other chemicals Thermal modification of wood Surface modification Impregnation modification Commercialisation of wood modification Environmental consideration and future developments This is the first time that a book has covered all wood modification technologies in one text. Although the book covers the main research developments in wood modification, it also puts wood modification into context and additionally deals with aspects of commercialisation and environmental impact. This book is very timely, because wood modification is undergoing huge developments at the present time, driven in part by environmental concerns regarding the use of wood treated with certain preservatives. There has been considerable commercial interest shown in wood modification over the past decade, with products based upon thermal modification, and furfurylation now being actively being marketed. The next few years will see the commercialisation of acetylation and impregnation modification. This is a new industry, but one that has enormous potential. This book will prove useful to all those with an interest in wood modification including researchers, technologists and professionals working in wood science and timber engineering, wood preservation, and well as professionals in the paper and pulp industries, and those with an interest in the development of renewable materials.
Wood is the usual end product of a forestry operation. Because of its importance, numerous studies have been made relative to wood prop erties, the causes of wood variation, and how best to develop wood for desired products. There is voluminous literature related to these subjects, but it is neither well known nor appreciated by foresters because the publications are often not available or are not well understood by the forester or by those who use the wood. Frequently, the literature is confusing and contradictory, making it difficult for the nonspecialist to use what information is available. In order to produce and use wood efficiently, the variation pat terns within trees, among trees within species, and among species must be understood. This also requires some knowledge of the causes of variation and the effects of different wood properties upon utiliza tion. The information about variation patterns, their causes, and con trol and effect upon the product must be known by the tree grower, the tree breeder, and the tree harvester as well as by those who ultimately convert wood into a final, salable product.
The trend in forestry is toward shorter rotations and more complete utiliza tion of trees. The reasons are: (1) financial pressures to obtain rapid returns on the forestry investment made possible by an earlier harvest; (2) enforced harvest of young plantations to maintain a continuing supply of cellulose for mills where wood shortages are experienced; (3) thinning young plantations, both because they were planted too densely initially and because thinning is done where long rotation quality trees are the forestry goal; (4) more intensive utilization is being done using tops and small diameter trees; and (5) there is interest in using young (juvenile) wood for special products because of its unique characteristics and the development of new technologies. The largest present-day source of conifer juvenile wood is from thinnings of plantations where millions of hectares of pine were planted too densely. Because of the better growth rate resulting from improved silviculture and good genetic stock, plantations will need to be thinned heavily. As a result of this trend, young wood makes up an increasingly larger proportion of the total conifer wood supply each year. Large amounts of juvenile wood from hard woods are also currently available, especially in the tropics and subtropics, because of the fast growth rate of the species used, which results in shorter rotations and ess~ntially all juvenile wood.
The degradable nature of high-performance, wood-based materials is an attractive advantage when considering environmental factors such as sustainability, recycling, and energy/resource conservation. The Handbook of Wood Chemistry and Wood Composites provides an excellent guide to the latest concepts and technologies in wood chemistry and bio-based composites. The book analyzes the chemical composition and physical properties of wood cellulose and its response to natural processes of degradation. It describes safe and effective chemical modifications to strengthen wood against biological, chemical, and mechanical degradation without using toxic, leachable, or corrosive chemicals. Expert researchers provide insightful analyses of the types of chemical modifications applied to polymer cell walls in wood, emphasizing the mechanisms of reaction involved and resulting changes in performance properties. These include modifications that increase water repellency, fire retardancy, and resistance to ultraviolet light, heat, moisture, mold, and other biological organisms. The text also explores modifications that increase mechanical strength, such as lumen fill, monomer polymer penetration, and plasticization. The Handbook of Wood Chemistry and Wood Composites concludes with the latest applications, such as adhesives, geotextiles, and sorbents, and future trends in the use of wood-based composites in terms of sustainable agriculture, biodegradability and recycling, and economics. Incorporating over 30 years of teaching experience, the esteemed editor of this handbook is well-attuned to educational demands as well as industry standards and research trends.
This four volume set covers the entire spectrum of pulp and paper chemistry and technology from starting material to processes and products including market demands. This work is essential for all students of wood science and a useful reference for those working in the pulp and paper industry or on the chemistry of renewable resources. Volume 1 provides a survey of the biological and chemical structure of wood as well as an introduction to the chemical reactions used during pulp production processes. The work presents the different raw materials used for pulp production, the macroscopic and morphological construction of wood and related characterization methods, the chemical structure and arrangement of the wood polymers and extractives, biosynthesis of wood polymers, carbohydrate and lignin analysis, reactions of wood polymers in mechanical and chemical pulping and bleaching processes, biotechnical processes of relevance for the pulp and paper industry, different types of microorganisms and their modes of interaction with wood, the impact of chemical and microbiological processes on the hierarchical structure of wood and pulp.
Trees are a major component of the biosphere and have played an important part in the world's history and culture. With the modern challenges of global warming and dwindling fossil fuel reserves, trees, and in particular their wood, can provide solutions. Unfortunately, too little is known about the biology of these plants, due largely to a lack of
The book is intended as a guide for molecular biology students, equipping them to successfully study plants. It pursues a holistic approach, viewing the whole plant as an integrated operating organism, and is written in a straightforward manner, making it appealing to anyone interested in plants. Further, it reflects the latest findings for scientists and students in the fields of plant sciences, biology, agriculture, forestry, ecology, vascular medicine and cancer, discussing e.g. how hormonal signals induce and regulate simple and complex patterns in plants vascular tissues, their adaptation and evolution. • written by a world-renowned expert who has worked in the field for 50 years • covers the field from the initial studies conducted more than a century ago up to recent studies with up-to-date explanations • describes in details the structure, development, physiology and basic molecular biology of plants’ vascular tissues, their function, regeneration and environmental adaptation • explores the controlling mechanisms of plant vascular differentiation by continuously moving hormonal signals and their precursors • discusses the regulation of stem cells and cambium, control of gradients in vascular cell size along the plant, juvenile-adult transition and rejuvenation, grafting, mechanisms of recovery from bending by reaction wood, evolution of vessels and fibers from tracheids, regulation of ring-porous wood evolution, protecting mechanisms against insects and pathogens, parasitism, plant cancer, and more • helps readers understand the scope and breadth of plant vascular systems in 20 detailed, high-quality chapters • includes a wealth of outstanding original color photographs and illustrations documenting the formation of vascular tissues • provides an in-depth understanding of plant biology by studying their vascular tissues
With today’s ever growing economic and ecological problems, wood as a raw material takes on increasing significance as the most important renewable source of energy and as industrial feedstock for numerous products. Its chemical and anatomical structure and the excellent properties that result allow wood to be processed into the most diverse products; from logs to furniture and veneers, and from wood chippings to wooden composites and paper. The aim of this book is to review advances in research on the cellular aspects of cambial growth and wood formation in trees over recent decades. The book is divided into two major parts. The first part covers the basic process of wood biosynthesis, focusing on five major steps that are involved in this process: cell division, cell expansion, secondary cell wall formation, programmed cell death and heartwood formation. The second part of the book deals with the regulation of wood formation by endogenous and exogenous factors. On the endogenous level the emphasis is placed on two aspects: control of wood formation by phytohormones and by molecular mechanisms. Apart from endogenous factors, various exogenous effects (such as climate factors) are involved in wood formation. Due to modern microscopic as well as molecular techniques, the understanding of wood formation has progressed significantly over the last decade. Emphasizing the cellular aspects, this book first gives an overview of the basic process of wood formation, before it focuses on factors involved in the regulation of this process.